STD Tuning Engine Most embarrasing dyno run ever

Most embarrasing dyno run ever

Most embarrasing dyno run ever

 
  • 0 Vote(s) - 0 Average
 
NZScott
HX30W 73/44mm

398
10-17-2015, 10:09 PM #1
So.....
Before I do my engine swapping etc I decided to put my '78 on the dyno to get me a idea of a "before" and get a good comparison of what my mods did...

My engine is a 1981 617.952 which is completely stock except for a removed ALDA (which did nothing). Once rated at 121 flywheel hp @4350rpm.


I know my IP settings are buggered up a bit, it hunts at idle and in low gears at certain pedal positions. I tried adjusting the ALDA but it made no difference so I took it right off...made a touch more smoke. She gets to 11psi @2700rpm...


But anyway, there it is, less than a OM616 Sad
This post was last modified: 10-17-2015, 10:10 PM by NZScott.
Attached Files
Image(s)
   


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
10-17-2015, 10:09 PM #1

So.....
Before I do my engine swapping etc I decided to put my '78 on the dyno to get me a idea of a "before" and get a good comparison of what my mods did...

My engine is a 1981 617.952 which is completely stock except for a removed ALDA (which did nothing). Once rated at 121 flywheel hp @4350rpm.


I know my IP settings are buggered up a bit, it hunts at idle and in low gears at certain pedal positions. I tried adjusting the ALDA but it made no difference so I took it right off...made a touch more smoke. She gets to 11psi @2700rpm...


But anyway, there it is, less than a OM616 Sad

Attached Files
Image(s)
   


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




barrote
Superturbo

1,627
10-18-2015, 02:29 AM #2
U got to wait for the new pump.
After u'll be amased...

FD,
Powered by tractor fuel
barrote
10-18-2015, 02:29 AM #2

U got to wait for the new pump.
After u'll be amased...


FD,
Powered by tractor fuel

NZScott
HX30W 73/44mm

398
10-18-2015, 11:33 PM #3
Oh yes, looking forward to it alright!


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
10-18-2015, 11:33 PM #3

Oh yes, looking forward to it alright!



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




TKMad
K26-2

34
10-19-2015, 11:25 AM #4
I took my '73 MGB to a dyno once, waited in line with a bunch of turbo Subaru WRX guys who were pushing 300 hp. They asked be what I expected so I said I was hoping for 90 hp. Got 52. I saw actual pity in their eyes!
TKMad
10-19-2015, 11:25 AM #4

I took my '73 MGB to a dyno once, waited in line with a bunch of turbo Subaru WRX guys who were pushing 300 hp. They asked be what I expected so I said I was hoping for 90 hp. Got 52. I saw actual pity in their eyes!

NZScott
HX30W 73/44mm

398
10-20-2015, 12:12 AM #5
Ha, oh damn. When I turned up I helped them shift 3 cars out of the way, they were all in various states of modding, hate to think the power they'd put out...


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
10-20-2015, 12:12 AM #5

Ha, oh damn. When I turned up I helped them shift 3 cars out of the way, they were all in various states of modding, hate to think the power they'd put out...



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




MFSuper90
Budget Builder

1,533
10-20-2015, 09:32 PM #6
My 617 made 124hp at the wheels on the rollers with a W/A, hx30, and modded stock MW. I was hoping for more as well, but I guess it's good to be optimistic Big Grin

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
10-20-2015, 09:32 PM #6

My 617 made 124hp at the wheels on the rollers with a W/A, hx30, and modded stock MW. I was hoping for more as well, but I guess it's good to be optimistic Big Grin


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

NZScott
HX30W 73/44mm

398
11-01-2015, 04:43 AM #7
Strange things do seem to occur with dynos, been reading a forum about a guy with a 120 odd hp NA 617 in a G wagen...


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
11-01-2015, 04:43 AM #7

Strange things do seem to occur with dynos, been reading a forum about a guy with a 120 odd hp NA 617 in a G wagen...



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




EDH_Performance
Holset

537
11-01-2015, 09:18 AM #8
(11-01-2015, 04:43 AM)NZScott Strange things do seem to occur with dynos, been reading a forum about a guy with a 120 odd hp NA 617 in a G wagen...

Hahah, real high revving n/a tuned 617 would be niceBig Grin
EDH_Performance
11-01-2015, 09:18 AM #8

(11-01-2015, 04:43 AM)NZScott Strange things do seem to occur with dynos, been reading a forum about a guy with a 120 odd hp NA 617 in a G wagen...

Hahah, real high revving n/a tuned 617 would be niceBig Grin

MFSuper90
Budget Builder

1,533
11-01-2015, 10:24 AM #9
Each and every dyno will give you different results as well. And it depends on if it is a inertia dyno, or a load cell or etc. it also depends if they correct your numbers or not.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
11-01-2015, 10:24 AM #9

Each and every dyno will give you different results as well. And it depends on if it is a inertia dyno, or a load cell or etc. it also depends if they correct your numbers or not.


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)