EDH-Performance `s mad OM606 Skiboat
EDH-Performance `s mad OM606 Skiboat
06-21-2016, 03:59 AM
#44
![[Image: 20160529_165021_zpsp4znixmv.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160529_165021_zpsp4znixmv.jpg.html)
The old ( 12"x16") prop vs the new (16.5"x23") prop
![[Image: 20160613_195424_zpsrv3welvt.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160613_195424_zpsrv3welvt.jpg.html)
![[Image: 20160613_195431_zpsmru7xorj.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160613_195431_zpsmru7xorj.jpg.html)
![[Image: 20160613_195440_zpsjlpi1i2l.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160613_195440_zpsjlpi1i2l.jpg.html)
![[Image: 20160613_195500_zpsatjhnucz.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160613_195500_zpsatjhnucz.jpg.html)
As you can see the new prop is much bigger and have a totally different shape...And it is BIG!
I only paid about 50usd for it and it was located 5min away from my house
BUT it needed some work to fit my boat and propshaft!
First propblem is the center of the shaft, it is cylindrical with spline to transfer the power and have a conical trust area in the rear.
My haft is 1" with 1:10 taperend end with key to transfer power and trust:
![[Image: 20160614_204135_zpsfrtfgknw.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_204135_zpsfrtfgknw.jpg.html)
Found and old useless prop with correct 1:10 tapered center with correct key:
![[Image: 20160614_191848_zpssninkyxu.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_191848_zpssninkyxu.jpg.html)
![[Image: 20160614_192134_zpsynur0qfp.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_192134_zpsynur0qfp.jpg.html)
Final outcome:
![[Image: 20160614_204141_zpsb7tnhv97.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_204141_zpsb7tnhv97.jpg.html)
Now this was pressed in the prop with about 10ton of pressure:
![[Image: 20160614_204848_zpsww7ekz8h.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_204848_zpsww7ekz8h.jpg.html)
Ligned it up in the lathe and machined it flat in the rear:
![[Image: 20160614_205701_zpscxlvnv1w.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_205701_zpscxlvnv1w.jpg.html)
![[Image: 20160614_205708_zpsj7engxtt.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_205708_zpsj7engxtt.jpg.html)
![[Image: 20160614_225213_zpsfidzluhx.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_225213_zpsfidzluhx.jpg.html)
The center of the new prop is larger and deeper than the old one so the threads is now inside the prop bore:
![[Image: 20160614_225222_zpsuahkdlpu.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_225222_zpsuahkdlpu.jpg.html)
![[Image: 20160614_225229_zps4bvqdhvc.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_225229_zps4bvqdhvc.jpg.html)
So i made a deep
![[Image: 20160614_225259_zpsdotoaeut.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160614_225259_zpsdotoaeut.jpg.html)
Then i cutted it down to 13.5"x22":
![[Image: 20160615_202351_zpsrx2uiiyx.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160615_202351_zpsrx2uiiyx.jpg.html)
![[Image: 20160615_224930_zpsqw5bvidi.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160615_224930_zpsqw5bvidi.jpg.html)
Test fit:
![[Image: 20160615_210933_zpsn435tmgg.jpg]](http://s3.photobucket.com/user/volvoturbopower/media/Skiboat/20160615_210933_zpsn435tmgg.jpg.html)
Then i shaped it to final dimension so all 3 blades was equal shaped. Then i balanced it.
This new prop has alot more bite than the old one. The old was slipping much more than this one.
Can not get it out of the water on 5th gear, so need to start on 4th and then shift to 5th but this is not a problem.
When i get it out of the water i have enough power to go faster than last year
Stay tuned for more fun on the water!!
EDH_Performance
06-21-2016, 03:59 AM #44Here are some photos of the propeller that hit the rudder:
The old ( 12"x16") prop vs the new (16.5"x23") prop
As you can see the new prop is much bigger and have a totally different shape...And it is BIG!
I only paid about 50usd for it and it was located 5min away from my house
BUT it needed some work to fit my boat and propshaft!
First propblem is the center of the shaft, it is cylindrical with spline to transfer the power and have a conical trust area in the rear.
My haft is 1" with 1:10 taperend end with key to transfer power and trust:
Found and old useless prop with correct 1:10 tapered center with correct key:
Final outcome:
Now this was pressed in the prop with about 10ton of pressure:
Ligned it up in the lathe and machined it flat in the rear:
The center of the new prop is larger and deeper than the old one so the threads is now inside the prop bore:
So i made a deep
Then i cutted it down to 13.5"x22":
Test fit:
Then i shaped it to final dimension so all 3 blades was equal shaped. Then i balanced it.
This new prop has alot more bite than the old one. The old was slipping much more than this one.
Can not get it out of the water on 5th gear, so need to start on 4th and then shift to 5th but this is not a problem.
When i get it out of the water i have enough power to go faster than last year
Stay tuned for more fun on the water!!
Messages In This Thread
EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 10-14-2015, 03:53 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 10-14-2015, 04:06 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 10-14-2015, 04:21 PM
RE: EDH-Performance `s mad OM606 Skiboat - by offroaddieselhu - 01-26-2016, 05:05 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 01-27-2016, 03:36 PM
RE: EDH-Performance `s mad OM606 Skiboat - by hooblah - 01-02-2016, 09:52 AM
RE: EDH-Performance `s mad OM606 Skiboat - by StrikerofDeath - 01-08-2016, 06:52 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 01-26-2016, 06:48 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-23-2016, 07:24 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-23-2016, 07:26 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-23-2016, 07:28 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Hario' - 05-23-2016, 07:51 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Tito - 05-23-2016, 03:54 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-24-2016, 05:11 AM
RE: EDH-Performance `s mad OM606 Skiboat - by atypicalguy - 05-26-2016, 05:45 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-26-2016, 06:16 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Turbo - 05-25-2016, 12:30 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-25-2016, 01:35 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-29-2016, 01:45 PM
RE: EDH-Performance `s mad OM606 Skiboat - by atypicalguy - 05-29-2016, 01:54 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-29-2016, 01:56 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-29-2016, 02:48 PM
RE: EDH-Performance `s mad OM606 Skiboat - by Hario' - 05-31-2016, 06:32 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 05-31-2016, 10:46 AM
RE: EDH-Performance `s mad OM606 Skiboat - by JSJFIN - 05-31-2016, 10:18 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-01-2016, 08:24 AM
RE: EDH-Performance `s mad OM606 Skiboat - by street_666 - 06-02-2016, 06:09 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-02-2016, 06:24 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Turbo - 06-02-2016, 06:53 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-02-2016, 12:58 PM
RE: EDH-Performance `s mad OM606 Skiboat - by atypicalguy - 06-02-2016, 08:49 AM
RE: EDH-Performance `s mad OM606 Skiboat - by atypicalguy - 06-02-2016, 08:53 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Tito - 06-02-2016, 03:21 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-02-2016, 11:53 PM
RE: EDH-Performance `s mad OM606 Skiboat - by zeeman - 06-04-2016, 12:06 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-05-2016, 02:23 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-20-2016, 03:04 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Hario' - 06-20-2016, 07:46 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-20-2016, 08:31 AM
RE: EDH-Performance `s mad OM606 Skiboat - by OM616 - 06-20-2016, 12:13 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-21-2016, 03:34 AM
RE: EDH-Performance `s mad OM606 Skiboat - by erx - 06-20-2016, 08:21 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-20-2016, 08:36 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-21-2016, 03:59 AM
RE: EDH-Performance `s mad OM606 Skiboat - by OM616 - 06-21-2016, 02:37 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-22-2016, 01:15 AM
RE: EDH-Performance `s mad OM606 Skiboat - by TurboTim - 06-22-2016, 06:17 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-22-2016, 07:16 AM
RE: EDH-Performance `s mad OM606 Skiboat - by TurboTim - 06-22-2016, 07:23 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-22-2016, 08:04 AM
RE: EDH-Performance `s mad OM606 Skiboat - by Hario' - 06-23-2016, 07:23 AM
RE: EDH-Performance `s mad OM606 Skiboat - by STDGer - 06-25-2016, 01:36 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 06-25-2016, 02:52 PM
RE: EDH-Performance `s mad OM606 Skiboat - by STDGer - 06-26-2016, 04:46 PM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 09-27-2016, 03:51 AM
RE: EDH-Performance `s mad OM606 Skiboat - by EDH_Performance - 09-27-2016, 04:25 AM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)