EDH-Performance `s mad OM606 Skiboat
EDH-Performance `s mad OM606 Skiboat
(10-14-2015, 04:21 PM)EDH_Performance After some more testruns i went on my own to see what max speed i could get...
But that didn`t end well, at full speed and full trottle the gearbox jumped into neutral!
So that was the end of that poor NA 606 engine!
It smashed some valves and two pistons...
So the engine was rebuilt with all the parts from the 190D engine, 606 turbopistons-H-profile rods and head with stiffer springs.
Turbo was changed to a Holset HE300w
And i bought a Casale 12 degree gearbox with 15% overdriven gears from New York.
And i found out that now with higher gears i need a gearbox between the engine and V-drive.
So my old welded BMW 530D gearbox came in handy!
So here is the newest pictures of the turbo and intercooler:
On the final drive we did 115km/h or 62 knots on 1.5 bars. Only with 5000rpm!
So new turbo, Hoslet HE351 with 12cm houisng will be installed...Then we will se if we can pull it to above 6000rpm
Here are some videos:
https://www.youtube.com/watch?v=_pzazyo5aBs
https://www.youtube.com/watch?v=epFPiO4WLdY
Stay tuned for more fun
(10-14-2015, 04:21 PM)EDH_Performance After some more testruns i went on my own to see what max speed i could get...
But that didn`t end well, at full speed and full trottle the gearbox jumped into neutral!
So that was the end of that poor NA 606 engine!
It smashed some valves and two pistons...
So the engine was rebuilt with all the parts from the 190D engine, 606 turbopistons-H-profile rods and head with stiffer springs.
Turbo was changed to a Holset HE300w
And i bought a Casale 12 degree gearbox with 15% overdriven gears from New York.
And i found out that now with higher gears i need a gearbox between the engine and V-drive.
So my old welded BMW 530D gearbox came in handy!
So here is the newest pictures of the turbo and intercooler:
On the final drive we did 115km/h or 62 knots on 1.5 bars. Only with 5000rpm!
So new turbo, Hoslet HE351 with 12cm houisng will be installed...Then we will se if we can pull it to above 6000rpm
Here are some videos:
https://www.youtube.com/watch?v=_pzazyo5aBs
https://www.youtube.com/watch?v=epFPiO4WLdY
Stay tuned for more fun