STD Other FS / WTB / Buying guides WTB OM606 Injectors

WTB OM606 Injectors

WTB OM606 Injectors

 
  • 0 Vote(s) - 0 Average
 
SurfRodder
Jackass Extraordinaire

611
09-19-2015, 03:20 AM #1
NA or Turbo. Just need the housings as I plan to finally finish my pop tester for the 606 build.

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
09-19-2015, 03:20 AM #1

NA or Turbo. Just need the housings as I plan to finally finish my pop tester for the 606 build.


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

raysorenson
Superturbo

1,162
09-21-2015, 08:35 AM #2
Do you have access to shims? I mention this because the 4v head injectors don't use the same commonly available shims as the other OM engines. If shims are a pita to source, sticking with just turbo injectors would be less headache
raysorenson
09-21-2015, 08:35 AM #2

Do you have access to shims? I mention this because the 4v head injectors don't use the same commonly available shims as the other OM engines. If shims are a pita to source, sticking with just turbo injectors would be less headache

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)