STD Other FS / WTB / Buying guides 85 300TD 4speed for sale in ca

85 300TD 4speed for sale in ca

85 300TD 4speed for sale in ca

 
  • 0 Vote(s) - 0 Average
 
E308L
K26-2

39
05-20-2015, 01:06 PM #1
I need to sell this car because I'm moving or I wouldn't be considering this at all.

I got it with a trashed auto, began a 5 speed swap, ran out of time, retrofitted the 4 speed and haven't completely finished. 


Details:

has 240k miles on original OM617 turbo

rebuilt turbo with new compressor wheel and balanced rotating assembly (recreceipt on file)

78 non egr intake and exhaust manifolds installed as well as non recirculating turbo compressor housing

erg system, trap oxidizer, auto trans and associated vacuum crap is all removed

716.210 4 speed on custom fabricated crossmember with factory rubber mount

OM616 flywheel resurfaced and match balanced to original auto flywheel (receipt on file)

New Sachs clutch, new OEM master and slave cylinders, plumbed with new copper tube, brass fittings, and braided stainless flex hose

SLS control valve just rebuilt with OEM kit including new pistons, springs and check ball. SLS system refilled with Febi brand OE spec fluid and operating normally

Exhaust is a half inch flange, .065x3"od 304 stainless sanitary tube. JusJust a downpipe and turndown for now but the rest of the parts are there for a complete system to rear bumper In all 304ss

car has minor collision damage at front driver to grill, headlight and core support, can easily pull out sheetmetal and replace affected parts

Im sure there's more im forgetting,  all questions welcome. I need to sell asap, asking $3000 as is. I dont have time to complete the project right now.
E308L
05-20-2015, 01:06 PM #1

I need to sell this car because I'm moving or I wouldn't be considering this at all.

I got it with a trashed auto, began a 5 speed swap, ran out of time, retrofitted the 4 speed and haven't completely finished. 


Details:

has 240k miles on original OM617 turbo

rebuilt turbo with new compressor wheel and balanced rotating assembly (recreceipt on file)

78 non egr intake and exhaust manifolds installed as well as non recirculating turbo compressor housing

erg system, trap oxidizer, auto trans and associated vacuum crap is all removed

716.210 4 speed on custom fabricated crossmember with factory rubber mount

OM616 flywheel resurfaced and match balanced to original auto flywheel (receipt on file)

New Sachs clutch, new OEM master and slave cylinders, plumbed with new copper tube, brass fittings, and braided stainless flex hose

SLS control valve just rebuilt with OEM kit including new pistons, springs and check ball. SLS system refilled with Febi brand OE spec fluid and operating normally

Exhaust is a half inch flange, .065x3"od 304 stainless sanitary tube. JusJust a downpipe and turndown for now but the rest of the parts are there for a complete system to rear bumper In all 304ss

car has minor collision damage at front driver to grill, headlight and core support, can easily pull out sheetmetal and replace affected parts

Im sure there's more im forgetting,  all questions welcome. I need to sell asap, asking $3000 as is. I dont have time to complete the project right now.

E308L
K26-2

39
05-20-2015, 01:08 PM #2
I should add that the driveshaft is cut and butt welded as a temporary solution.  I drive it around town but not safe for freeway speeds.

Clean title in my name on non op no fees or bs

Edit:
Sale will include original Ca 85 manifolds and trap oxidizer,  W115 OM617 N/A manifold, spare turbo for parts, and all my other Mercedes parts.
This post was last modified: 05-22-2015, 09:34 AM by E308L.


E308L
05-20-2015, 01:08 PM #2

I should add that the driveshaft is cut and butt welded as a temporary solution.  I drive it around town but not safe for freeway speeds.

Clean title in my name on non op no fees or bs

Edit:
Sale will include original Ca 85 manifolds and trap oxidizer,  W115 OM617 N/A manifold, spare turbo for parts, and all my other Mercedes parts.



E308L
K26-2

39
05-23-2015, 04:42 PM #3
[Image: 20150509_163305_zps59wfh3ja.jpg]
This is the SLS control valve after I rebuilt it before reinstallation


E308L
05-23-2015, 04:42 PM #3

[Image: 20150509_163305_zps59wfh3ja.jpg]
This is the SLS control valve after I rebuilt it before reinstallation



E308L
K26-2

39
05-23-2015, 05:11 PM #4
This is the downpipe after initial fitup before welding
[Image: 20150419_102803_zpslruqtgzk.jpg]


E308L
05-23-2015, 05:11 PM #4

This is the downpipe after initial fitup before welding
[Image: 20150419_102803_zpslruqtgzk.jpg]



E308L
K26-2

39
05-23-2015, 05:16 PM #5
Downpipe welded and bolted in


[Image: 20150424_084422_zpsj7oeqkqt.jpg]

I'll get more pictures soon, this is just what's already on my phone
E308L
05-23-2015, 05:16 PM #5

Downpipe welded and bolted in


[Image: 20150424_084422_zpsj7oeqkqt.jpg]

I'll get more pictures soon, this is just what's already on my phone

atypicalguy
Holset

555
05-24-2015, 08:54 PM #6
(05-20-2015, 01:06 PM)E308L I need to sell this car because I'm moving or I wouldn't be considering this at all.

I got it with a trashed auto, began a 5 speed swap, ran out of time, retrofitted the 4 speed and haven't completely finished. 


Details:

has 240k miles on original OM617 turbo

rebuilt turbo with new compressor wheel and balanced rotating assembly (recreceipt on file)

78 non egr intake and exhaust manifolds installed as well as non recirculating turbo compressor housing

erg system, trap oxidizer, auto trans and associated vacuum crap is all removed

716.210 4 speed on custom fabricated crossmember with factory rubber mount

OM616 flywheel resurfaced and match balanced to original auto flywheel (receipt on file)

New Sachs clutch, new OEM master and slave cylinders, plumbed with new copper tube, brass fittings, and braided stainless flex hose

SLS control valve just rebuilt with OEM kit including new pistons, springs and check ball. SLS system refilled with Febi brand OE spec fluid and operating normally

Exhaust is a half inch flange, .065x3"od 304 stainless sanitary tube. JusJust a downpipe and turndown for now but the rest of the parts are there for a complete system to rear bumper In all 304ss

car has minor collision damage at front driver to grill, headlight and core support, can easily pull out sheetmetal and replace affected parts

Im sure there's more im forgetting,  all questions welcome. I need to sell asap, asking $3000 as is. I dont have time to complete the project right now.

Super nice downpipe. Looks like you have a positioner.
atypicalguy
05-24-2015, 08:54 PM #6

(05-20-2015, 01:06 PM)E308L I need to sell this car because I'm moving or I wouldn't be considering this at all.

I got it with a trashed auto, began a 5 speed swap, ran out of time, retrofitted the 4 speed and haven't completely finished. 


Details:

has 240k miles on original OM617 turbo

rebuilt turbo with new compressor wheel and balanced rotating assembly (recreceipt on file)

78 non egr intake and exhaust manifolds installed as well as non recirculating turbo compressor housing

erg system, trap oxidizer, auto trans and associated vacuum crap is all removed

716.210 4 speed on custom fabricated crossmember with factory rubber mount

OM616 flywheel resurfaced and match balanced to original auto flywheel (receipt on file)

New Sachs clutch, new OEM master and slave cylinders, plumbed with new copper tube, brass fittings, and braided stainless flex hose

SLS control valve just rebuilt with OEM kit including new pistons, springs and check ball. SLS system refilled with Febi brand OE spec fluid and operating normally

Exhaust is a half inch flange, .065x3"od 304 stainless sanitary tube. JusJust a downpipe and turndown for now but the rest of the parts are there for a complete system to rear bumper In all 304ss

car has minor collision damage at front driver to grill, headlight and core support, can easily pull out sheetmetal and replace affected parts

Im sure there's more im forgetting,  all questions welcome. I need to sell asap, asking $3000 as is. I dont have time to complete the project right now.

Super nice downpipe. Looks like you have a positioner.

E308L
K26-2

39
05-25-2015, 12:19 PM #7
No positioner, Im a welder by trade. Thank you for the compliment.

On another note, price is negotiable, I really need to sell this car asap!!!!


E308L
05-25-2015, 12:19 PM #7

No positioner, Im a welder by trade. Thank you for the compliment.

On another note, price is negotiable, I really need to sell this car asap!!!!



lgreeley83
Mr. Rumbles

775
05-25-2015, 10:07 PM #8
Picture of car? Not that I can buy it being across the country and what not. We need car porn though.

" straighten up that star on the grill, assholes."

lgreeley83
05-25-2015, 10:07 PM #8

Picture of car? Not that I can buy it being across the country and what not. We need car porn though.


" straighten up that star on the grill, assholes."

E308L
K26-2

39
07-07-2015, 07:27 PM #9
[Image: mbz%20pics_zpsfhumzjpz.jpg]


E308L
07-07-2015, 07:27 PM #9

[Image: mbz%20pics_zpsfhumzjpz.jpg]



E308L
K26-2

39
07-07-2015, 07:29 PM #10
[Image: 20150621_123434_zpsruoxl27o.jpg]


E308L
07-07-2015, 07:29 PM #10

[Image: 20150621_123434_zpsruoxl27o.jpg]



E308L
K26-2

39
07-07-2015, 07:31 PM #11
[Image: 20150621_123451_zpsqqdqbkhu.jpg]


E308L
07-07-2015, 07:31 PM #11

[Image: 20150621_123451_zpsqqdqbkhu.jpg]



E308L
K26-2

39
07-07-2015, 07:33 PM #12
[Image: 20150621_123505_zps2yramtsl.jpg]


E308L
07-07-2015, 07:33 PM #12

[Image: 20150621_123505_zps2yramtsl.jpg]



E308L
K26-2

39
07-07-2015, 07:36 PM #13
[Image: 20150621_123958_zpsigvjas27.jpg]


E308L
07-07-2015, 07:36 PM #13

[Image: 20150621_123958_zpsigvjas27.jpg]



E308L
K26-2

39
07-07-2015, 07:38 PM #14
[Image: 20150621_123642_zpsbzm6rlmi.jpg]


E308L
07-07-2015, 07:38 PM #14

[Image: 20150621_123642_zpsbzm6rlmi.jpg]



E308L
K26-2

39
07-07-2015, 07:40 PM #15
[Image: 20150621_124012_zpsm5is2d3b.jpg]


E308L
07-07-2015, 07:40 PM #15

[Image: 20150621_124012_zpsm5is2d3b.jpg]



E308L
K26-2

39
07-07-2015, 07:50 PM #16
I have the black rubber strip for rear bumper, it was sagging so I removed it before losing it.

Reduced to $2750, open to offers no trades please


E308L
07-07-2015, 07:50 PM #16

I have the black rubber strip for rear bumper, it was sagging so I removed it before losing it.

Reduced to $2750, open to offers no trades please



atypicalguy
Holset

555
07-12-2015, 07:44 AM #17
Where do you get the sanitary tubing?
atypicalguy
07-12-2015, 07:44 AM #17

Where do you get the sanitary tubing?

E308L
K26-2

39
07-12-2015, 09:32 AM #18
I get it at work, I'm a process pipe welder and I weld sanitary tube/stainless pipe and structural everyday. I get stainless drops and scrap often. You can contact a local pipe supplier and ask about sanitary tube but be ready for some sticker shock. The 4" .065" wall I have for my cummins is over $25/ft to buy retail.
This post was last modified: 07-12-2015, 09:35 AM by E308L.


E308L
07-12-2015, 09:32 AM #18

I get it at work, I'm a process pipe welder and I weld sanitary tube/stainless pipe and structural everyday. I get stainless drops and scrap often. You can contact a local pipe supplier and ask about sanitary tube but be ready for some sticker shock. The 4" .065" wall I have for my cummins is over $25/ft to buy retail.



E308L
K26-2

39
07-21-2015, 02:27 PM #19
Seriously, not a bit of interest at all huh? Did I mention price is negotiable? 


E308L
07-21-2015, 02:27 PM #19

Seriously, not a bit of interest at all huh? Did I mention price is negotiable? 



MFSuper90
Budget Builder

1,533
07-22-2015, 10:22 PM #20
I'd be kinda interested, but I live wayyyy to far away to consider it.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
07-22-2015, 10:22 PM #20

I'd be kinda interested, but I live wayyyy to far away to consider it.


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

atypicalguy
Holset

555
07-22-2015, 11:28 PM #21
Oh it looks nice. I am in LA. I already drive an 85 wagon with 189k though. Thanks for info on the pipe. If I needed a car I would buy it.
atypicalguy
07-22-2015, 11:28 PM #21

Oh it looks nice. I am in LA. I already drive an 85 wagon with 189k though. Thanks for info on the pipe. If I needed a car I would buy it.

SurfRodder
Jackass Extraordinaire

611
07-23-2015, 11:00 PM #22
Is that you Nate?
I would definitely be interested in this but I have WAY too many projects right now. Where are you moving to?
Josh

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
07-23-2015, 11:00 PM #22

Is that you Nate?
I would definitely be interested in this but I have WAY too many projects right now. Where are you moving to?
Josh


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

E308L
K26-2

39
07-28-2015, 01:14 AM #23
Hey Josh!

Yeah its me. Like I said above I dont want to sell at all but I have no time and wont have space....

That 4 speed turned out to be just fine, I put around town in the wagon sometimes and never an issue.

My family and I are moving to Magalia near Paradise. I don't think I'd survive another year in the valley if I had to!!


E308L
07-28-2015, 01:14 AM #23

Hey Josh!

Yeah its me. Like I said above I dont want to sell at all but I have no time and wont have space....

That 4 speed turned out to be just fine, I put around town in the wagon sometimes and never an issue.

My family and I are moving to Magalia near Paradise. I don't think I'd survive another year in the valley if I had to!!



SurfRodder
Jackass Extraordinaire

611
07-29-2015, 08:17 PM #24
Awesome Brother...thats a nice part of the state! I was just up around those parts (near Yuba) on the way to Portland to pick up an OM606 a few weeks back. Again, I hope you can find a buyer, looks like a nice wagon and you've done some great work...If I had the room I would swap the remaining good parts off my w123 and run it. I've always loved the wagons.

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
07-29-2015, 08:17 PM #24

Awesome Brother...thats a nice part of the state! I was just up around those parts (near Yuba) on the way to Portland to pick up an OM606 a few weeks back. Again, I hope you can find a buyer, looks like a nice wagon and you've done some great work...If I had the room I would swap the remaining good parts off my w123 and run it. I've always loved the wagons.


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

Dieselkraut
Naturally-aspirated

17
07-30-2015, 03:41 AM #25
(07-28-2015, 01:14 AM)E308L I told a guy about your car. He says to call or text him in the mid morning to afternoon. He's a serious buyer if he likes what he sees. Your car looks good so.....  His number is in your private messages. His name is Clint


Hey Josh!

Yeah its me. Like I said above I dont want to sell at all but I have no time and wont have space....

That 4 speed turned out to be just fine, I put around town in the wagon sometimes and never an issue.

My family and I are moving to Magalia near Paradise. I don't think I'd survive another year in the valley if I had to!!
Dieselkraut
07-30-2015, 03:41 AM #25

(07-28-2015, 01:14 AM)E308L I told a guy about your car. He says to call or text him in the mid morning to afternoon. He's a serious buyer if he likes what he sees. Your car looks good so.....  His number is in your private messages. His name is Clint


Hey Josh!

Yeah its me. Like I said above I dont want to sell at all but I have no time and wont have space....

That 4 speed turned out to be just fine, I put around town in the wagon sometimes and never an issue.

My family and I are moving to Magalia near Paradise. I don't think I'd survive another year in the valley if I had to!!

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)