STD Tuning Brakes w210 16x7.5 on w123 with gen2 w126 brakes?

w210 16x7.5 on w123 with gen2 w126 brakes?

w210 16x7.5 on w123 with gen2 w126 brakes?

 
  • 0 Vote(s) - 0 Average
 
Edian727
Dreams of 8mm 617

127
02-06-2015, 02:58 PM #1
heres a link to the ones im lookin at, http://spokane.craigslist.org/pts/4865771041.html. does anybody know if these will clear my steering link? if all the info i got is right(41 offset for 210 and 30 for stock 14x6's) then it'll be very close. it should just clear the top of the spindle, but it wont clear the steering unless its a diff offset(only got like 1/2 inch need almost 1.25) or the 16's are enough to go on the outside of it.

really hope these fit as mercedes or audi wheels are hard to find in my pull yard's. I found 1 last time i was there, and I didn't even buy it. I'm at the point where its sketchy to drive the old girl cuz of my ball joints, just hoping to upgrade the brakes at the same time. I'm glad its a stick though otherwise it'd be scary drivin round here with those pathetic stock brakes. 240d with none cooled front Dodgy to many hills i know i can fade my brakes on if i use em.
Edian727
02-06-2015, 02:58 PM #1

heres a link to the ones im lookin at, http://spokane.craigslist.org/pts/4865771041.html. does anybody know if these will clear my steering link? if all the info i got is right(41 offset for 210 and 30 for stock 14x6's) then it'll be very close. it should just clear the top of the spindle, but it wont clear the steering unless its a diff offset(only got like 1/2 inch need almost 1.25) or the 16's are enough to go on the outside of it.

really hope these fit as mercedes or audi wheels are hard to find in my pull yard's. I found 1 last time i was there, and I didn't even buy it. I'm at the point where its sketchy to drive the old girl cuz of my ball joints, just hoping to upgrade the brakes at the same time. I'm glad its a stick though otherwise it'd be scary drivin round here with those pathetic stock brakes. 240d with none cooled front Dodgy to many hills i know i can fade my brakes on if i use em.

02-08-2015, 05:30 AM #2
I don't think they fit without spacers... The rear trailing arm is also pretty close. To get the inner edge ofthe wheel anywhere to hwere the stock wheel sits you'd require 20mm spacers - resp. a ET around 20.

Have a look/play here: http://www.willtheyfit.com/index.php?wid...te#content

VW/Audo wheels ahve too smal a center bore; 57mm, MB has 66.Xmm... I would love a set of Phaeton winter alloys on my C124, but it's not going to happen (legally)
This post was last modified: 02-08-2015, 05:33 AM by DiseaselWeasel.

____________________________________

'88 300CD Turbo Coupé - OM603
DiseaselWeasel
02-08-2015, 05:30 AM #2

I don't think they fit without spacers... The rear trailing arm is also pretty close. To get the inner edge ofthe wheel anywhere to hwere the stock wheel sits you'd require 20mm spacers - resp. a ET around 20.

Have a look/play here: http://www.willtheyfit.com/index.php?wid...te#content

VW/Audo wheels ahve too smal a center bore; 57mm, MB has 66.Xmm... I would love a set of Phaeton winter alloys on my C124, but it's not going to happen (legally)


____________________________________

'88 300CD Turbo Coupé - OM603

Edian727
Dreams of 8mm 617

127
02-13-2015, 12:16 PM #3
Thanks a lot, very useful site. Too bad about the audi wheels.... seems they had a little more corosion resistance. seen a lot of shitty 124 and 126 wheels around, doesnt help they spray so much de-icer.
Edian727
02-13-2015, 12:16 PM #3

Thanks a lot, very useful site. Too bad about the audi wheels.... seems they had a little more corosion resistance. seen a lot of shitty 124 and 126 wheels around, doesnt help they spray so much de-icer.

swampmonkey
hx40 super

280
02-16-2015, 04:51 AM #4
if you want 16" i found a set of 16" Mb wheels with et33 7.5 inch wide, testfitted and they came on nice, dont want to sell, but might be worth knowing there are options.

also got a set of r129 rims 16" and 8 inch wide et35 i think, hope they will sitt nice at the rear atleast Smile

---

---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
swampmonkey
02-16-2015, 04:51 AM #4

if you want 16" i found a set of 16" Mb wheels with et33 7.5 inch wide, testfitted and they came on nice, dont want to sell, but might be worth knowing there are options.

also got a set of r129 rims 16" and 8 inch wide et35 i think, hope they will sitt nice at the rear atleast Smile

---


---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)