STD Tuning Drivetrain Clutch disk thickness? replace?

Clutch disk thickness? replace?

Clutch disk thickness? replace?

 
  • 0 Vote(s) - 0 Average
 
MrHope
GT2256V

112
01-04-2015, 05:21 PM #1
im going to put the engine and gearbox togeather and was wondering if its best to buy a new standard pp and disk?

or is it any stronger pp that fits the c250turbo flywheel?

Its a 240mm clutch disk from c250Turbo its looks ok and is 9mm now.

is it a waste of money to buy an new clutch kit just to be sure?

and is an old pp weaker that a new one?

.
W460 300GD with om605 Turbo 6mm pump Build Thread!
W124 300D 1985 (daily driver)
MrHope
01-04-2015, 05:21 PM #1

im going to put the engine and gearbox togeather and was wondering if its best to buy a new standard pp and disk?

or is it any stronger pp that fits the c250turbo flywheel?

Its a 240mm clutch disk from c250Turbo its looks ok and is 9mm now.

is it a waste of money to buy an new clutch kit just to be sure?

and is an old pp weaker that a new one?


.
W460 300GD with om605 Turbo 6mm pump Build Thread!
W124 300D 1985 (daily driver)

raysorenson
Superturbo

1,162
01-05-2015, 12:50 PM #2
I measured my last disc thickness at 9mm new. This was a 26 spline hub disc.
raysorenson
01-05-2015, 12:50 PM #2

I measured my last disc thickness at 9mm new. This was a 26 spline hub disc.

MrHope
GT2256V

112
01-05-2015, 03:41 PM #3
ok! Sounds good!
i think its looks good and its a few mm down to the fastners.

mine is 26spline to dualmass fw

.
W460 300GD with om605 Turbo 6mm pump Build Thread!
W124 300D 1985 (daily driver)
MrHope
01-05-2015, 03:41 PM #3

ok! Sounds good!
i think its looks good and its a few mm down to the fastners.

mine is 26spline to dualmass fw


.
W460 300GD with om605 Turbo 6mm pump Build Thread!
W124 300D 1985 (daily driver)

F.R.A.S
Holset

579
01-06-2015, 02:09 PM #4
Yea stock is 9,2mm so your clutch is more or less new.

HERE you have a Sachs Performance Clutch that is 30% stronger than stock. BoltOn Cool
This post was last modified: 01-06-2015, 02:10 PM by F.R.A.S.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
01-06-2015, 02:09 PM #4

Yea stock is 9,2mm so your clutch is more or less new.

HERE you have a Sachs Performance Clutch that is 30% stronger than stock. BoltOn Cool


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

MrHope
GT2256V

112
01-06-2015, 05:16 PM #5
(01-06-2015, 02:09 PM)F.R.A.S Yea stock is 9,2mm so your clutch is more or less new.

HERE you have a Sachs Performance Clutch that is 30% stronger than stock. BoltOn Cool

alot of money for 30%... but its probably the only thng that fits right on?

.
W460 300GD with om605 Turbo 6mm pump Build Thread!
W124 300D 1985 (daily driver)
MrHope
01-06-2015, 05:16 PM #5

(01-06-2015, 02:09 PM)F.R.A.S Yea stock is 9,2mm so your clutch is more or less new.

HERE you have a Sachs Performance Clutch that is 30% stronger than stock. BoltOn Cool

alot of money for 30%... but its probably the only thng that fits right on?


.
W460 300GD with om605 Turbo 6mm pump Build Thread!
W124 300D 1985 (daily driver)

F.R.A.S
Holset

579
01-07-2015, 05:16 AM #6
For a 100% BoltOn original Sachs Performance clutch I don't think it's that expensive Tongue

It is the only thing that really bolts on. How ever you could email them and ask if they can put a sinter clutch in the package instead of the "organic" (it is actually not a standard organic it's a bit tougher).

Sachs sinter clutches are also 9.2mm so you will have no problem with low PP pressure. After market sinter clutches are 8mm and creates quite some problem if unaware.

(01-06-2015, 05:16 PM)MrHope alot of money for 30%... but its probably the only thng that fits right on?

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
01-07-2015, 05:16 AM #6

For a 100% BoltOn original Sachs Performance clutch I don't think it's that expensive Tongue

It is the only thing that really bolts on. How ever you could email them and ask if they can put a sinter clutch in the package instead of the "organic" (it is actually not a standard organic it's a bit tougher).

Sachs sinter clutches are also 9.2mm so you will have no problem with low PP pressure. After market sinter clutches are 8mm and creates quite some problem if unaware.

(01-06-2015, 05:16 PM)MrHope alot of money for 30%... but its probably the only thng that fits right on?


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)