W202 Wagon build thread - *NOW OM606*
W202 Wagon build thread - *NOW OM606*
(10-23-2016, 01:47 PM)Hario Replaced the DV seals and washers, still idles like shit..
Going to get new nozzles and rebuild the injectors, HughF on here has a pop tester so we can do it ourselves, thinking of going for 150 bar pop pressure, in anticipation of fitting a build pump once I've sorted the chassis. Has anybody done that with the stock 6mm EDC pump before? IE will it run ok or need timing adjusting because of the higher pop pressure?
Shall I go for Monark ones or stock Bosh nozzles? Any input appreciated!
Beers, H..
(10-23-2016, 01:47 PM)Hario Replaced the DV seals and washers, still idles like shit..
Going to get new nozzles and rebuild the injectors, HughF on here has a pop tester so we can do it ourselves, thinking of going for 150 bar pop pressure, in anticipation of fitting a build pump once I've sorted the chassis. Has anybody done that with the stock 6mm EDC pump before? IE will it run ok or need timing adjusting because of the higher pop pressure?
Shall I go for Monark ones or stock Bosh nozzles? Any input appreciated!
Beers, H..