(02-10-2016, 06:13 PM)MartinB I bought both for about 1500 CZK = 55,5 € = 43 GBP
I found out W203 C32 discs are 345mm and correct offset for W202 knuckles by the way.
But the calliper will still need the 3 or 4mm hardened washer spacers of course.
Regarding the hoses, the calliper end needs to be a 20 degree banjo hose fitting, to point in the right direction, and the hose needs to be 100mm longer than the standard item. But I still haven't worked out what the fitting is on the car end yet.
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]