W202 Wagon build thread - *NOW OM606*
W202 Wagon build thread - *NOW OM606*
Bought a W220 S500 front caliper to make a start on my big brake upgrade, I can confirm they fit the W202 knuckle and clear the dust shield (only bented it from me splitting BJ's).. They will need 3 or 4mm bolt spacers between the caliper and the knuckles, I'm going to get some machined because mild washers aren't good enough.
That's the stock disc obviously, I need W203 AMG (330mm) discs for a bolt on swap (I think-hope).
Got to make up brake hoses 100mm longer and M10 banjo on the outer.
Does anybody know the thread & fitting type on the inboard bulkhead fitting for the flex onto the hard pipe under the wing?
Beers.