WTB K26 Turbo
WTB K26 Turbo
07-15-2014, 07:49 PM
#2
(07-15-2014, 09:56 AM)snowbrd84 Looking to buy a K26 turbo for an OM617, PM me if ya got one. Please include price with shipping to 20814. Thanks.
Boooo! There's nothing "super" about a K26!
Why not upgrade?
I've got a nice used Garrett GT2256v with fried electronics that I'd probably sell/trade. It'd give you near instant boost once setup properly and moves more air on the top end too. It has a unique flange that would need adaptation but its worth the work.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
(07-15-2014, 09:56 AM)snowbrd84 Looking to buy a K26 turbo for an OM617, PM me if ya got one. Please include price with shipping to 20814. Thanks.
Boooo! There's nothing "super" about a K26!
Why not upgrade?
I've got a nice used Garrett GT2256v with fried electronics that I'd probably sell/trade. It'd give you near instant boost once setup properly and moves more air on the top end too. It has a unique flange that would need adaptation but its worth the work.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
07-15-2014, 08:57 PM
#3
(07-15-2014, 07:49 PM)CRD4x4(07-15-2014, 09:56 AM)snowbrd84 Looking to buy a K26 turbo for an OM617, PM me if ya got one. Please include price with shipping to 20814. Thanks.
Boooo! There's nothing "super" about a K26!
Why not upgrade?
I've got a nice used Garrett GT2256v with fried electronics that I'd probably sell/trade. It'd give you near instant boost once setup properly and moves more air on the top end too. It has a unique flange that would need adaptation but its worth the work.
That's funny, after more and more reading today, I decided I was gonna try and go find a GT2256v this weekend at the pick n pull. No good deals on eBay for one right now. How much you want for it with shipping to 20814?
(07-15-2014, 07:49 PM)CRD4x4(07-15-2014, 09:56 AM)snowbrd84 Looking to buy a K26 turbo for an OM617, PM me if ya got one. Please include price with shipping to 20814. Thanks.
Boooo! There's nothing "super" about a K26!
Why not upgrade?
I've got a nice used Garrett GT2256v with fried electronics that I'd probably sell/trade. It'd give you near instant boost once setup properly and moves more air on the top end too. It has a unique flange that would need adaptation but its worth the work.
That's funny, after more and more reading today, I decided I was gonna try and go find a GT2256v this weekend at the pick n pull. No good deals on eBay for one right now. How much you want for it with shipping to 20814?
07-16-2014, 11:49 AM
#4
If you come pick it up in Hunt Valley, MD it'll only cost you $150.
This is only because you're a std member and drive a turbodiesel jeep!
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
No shipping needed! We live in the same (small) state!
If you come pick it up in Hunt Valley, MD it'll only cost you $150.
This is only because you're a std member and drive a turbodiesel jeep!
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
07-16-2014, 01:28 PM
#6
I'm in cockeysville as well
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-16-2014, 01:28 PM #6Find me a sub $100 boat trailer down in your neck of the woods to give me an excuse for a road trip and I'll deliver
I'm in cockeysville as well
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
07-18-2014, 09:00 AM
#7
(07-16-2014, 01:00 PM)snowbrd84 I dont think I would be able to make it up there any time soon. I work in Tysons Corner and live in Bethesda so weekdays are out, and Im gonna be out near Brunswick all weekend working on the boat. Would you be able to ship it?
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
I'd really rather you inspected the turbo in person since we're local to one another. I'm in no hurry and the turbo isn't "for sale" anywhere else so its yours when you're ready for it.
(07-16-2014, 01:00 PM)snowbrd84 I dont think I would be able to make it up there any time soon. I work in Tysons Corner and live in Bethesda so weekdays are out, and Im gonna be out near Brunswick all weekend working on the boat. Would you be able to ship it?
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
07-21-2014, 11:22 AM
#8
-Jooseppi
1982 300SD -- 211k, Texas car, tranny issues
1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod
. Given to me by JB3, who got it from purplecomputer.Some blasphemous vehicles in the fleet as well -- 2004 Corolla 5-speed and 1994 Buick Century
2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die."
Jooseppi Luna
07-21-2014, 11:22 AM #8What car(s) did the Garrett GT2256v originally come in?
-Jooseppi
1982 300SD -- 211k, Texas car, tranny issues
1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod
. Given to me by JB3, who got it from purplecomputer.Some blasphemous vehicles in the fleet as well -- 2004 Corolla 5-speed and 1994 Buick Century
2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die."
07-21-2014, 11:26 AM
#9
(07-21-2014, 11:22 AM)Jooseppi Luna What car(s) did the Garrett GT2256v originally come in?
Sprinters
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
07-21-2014, 11:26 AM #9(07-21-2014, 11:22 AM)Jooseppi Luna What car(s) did the Garrett GT2256v originally come in?
Sprinters
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
07-21-2014, 12:22 PM
#10
Alfa Romeo 156 & 166; BMW 330D & X5; Fiat Ducato & Marea; Ford Ranger; Iveco Daily; Jeep Grand Cherokee; Lancia Aurelia & Lybra; Land Rover Range Rover; Mercedes-Benz C270, E270, ML270, Sprinter; Renault Mascott.
(07-21-2014, 11:26 AM)Simpler=Better(07-21-2014, 11:22 AM)Jooseppi Luna What car(s) did the Garrett GT2256v originally come in?
Sprinters
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
Also these 2.4-3.0L diesel powered cars/trucks:
Alfa Romeo 156 & 166; BMW 330D & X5; Fiat Ducato & Marea; Ford Ranger; Iveco Daily; Jeep Grand Cherokee; Lancia Aurelia & Lybra; Land Rover Range Rover; Mercedes-Benz C270, E270, ML270, Sprinter; Renault Mascott.
(07-21-2014, 11:26 AM)Simpler=Better(07-21-2014, 11:22 AM)Jooseppi Luna What car(s) did the Garrett GT2256v originally come in?
Sprinters
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
07-21-2014, 03:34 PM
#11
(07-21-2014, 12:22 PM)CRD4x4 Also these 2.4-3.0L diesel powered cars/trucks:
Alfa Romeo 156 & 166; BMW 330D & X5; Fiat Ducato & Marea; Ford Ranger; Iveco Daily; Jeep Grand Cherokee; Lancia Aurelia & Lybra; Land Rover Range Rover; Mercedes-Benz C270, E270, ML270, Sprinter; Renault Mascott.
(07-21-2014, 11:26 AM)Simpler=Better(07-21-2014, 11:22 AM)Jooseppi Luna What car(s) did the Garrett GT2256v originally come in?
Sprinters
So I was actually wondering about the Renaults, because I saw one on eBay, a GT2256V from a Renault, and I believe it had a T3 flange already
Yeah, look here, in the last picture, you can see a T3 manifold gasket.
http://www.ebay.com/itm/GT22V-GT2256V-Iv...ff&vxp=mtr
This post was last modified: 07-21-2014, 03:36 PM by snowbrd84.
(07-21-2014, 12:22 PM)CRD4x4 Also these 2.4-3.0L diesel powered cars/trucks:
Alfa Romeo 156 & 166; BMW 330D & X5; Fiat Ducato & Marea; Ford Ranger; Iveco Daily; Jeep Grand Cherokee; Lancia Aurelia & Lybra; Land Rover Range Rover; Mercedes-Benz C270, E270, ML270, Sprinter; Renault Mascott.
(07-21-2014, 11:26 AM)Simpler=Better(07-21-2014, 11:22 AM)Jooseppi Luna What car(s) did the Garrett GT2256v originally come in?
Sprinters
So I was actually wondering about the Renaults, because I saw one on eBay, a GT2256V from a Renault, and I believe it had a T3 flange already
Yeah, look here, in the last picture, you can see a T3 manifold gasket.
http://www.ebay.com/itm/GT22V-GT2256V-Iv...ff&vxp=mtr
07-21-2014, 08:55 PM
#12
(07-21-2014, 03:34 PM)snowbrd84Hot damn! That housing would be nice to have! And its setup with an actuator too.(07-21-2014, 12:22 PM)CRD4x4 Also these 2.4-3.0L diesel powered cars/trucks:
Alfa Romeo 156 & 166; BMW 330D & X5; Fiat Ducato & Marea; Ford Ranger; Iveco Daily; Jeep Grand Cherokee; Lancia Aurelia & Lybra; Land Rover Range Rover; Mercedes-Benz C270, E270, ML270, Sprinter; Renault Mascott.
(07-21-2014, 11:26 AM)Simpler=Better Sprinters
So I was actually wondering about the Renaults, because I saw one on eBay, a GT2256V from a Renault, and I believe it had a T3 flange already
Yeah, look here, in the last picture, you can see a T3 manifold gasket.
http://www.ebay.com/itm/GT22V-GT2256V-Iv...ff&vxp=mtr
The price and origin would keep me from buying it though. At 50% maybe.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
(07-21-2014, 03:34 PM)snowbrd84Hot damn! That housing would be nice to have! And its setup with an actuator too.(07-21-2014, 12:22 PM)CRD4x4 Also these 2.4-3.0L diesel powered cars/trucks:
Alfa Romeo 156 & 166; BMW 330D & X5; Fiat Ducato & Marea; Ford Ranger; Iveco Daily; Jeep Grand Cherokee; Lancia Aurelia & Lybra; Land Rover Range Rover; Mercedes-Benz C270, E270, ML270, Sprinter; Renault Mascott.
(07-21-2014, 11:26 AM)Simpler=Better Sprinters
So I was actually wondering about the Renaults, because I saw one on eBay, a GT2256V from a Renault, and I believe it had a T3 flange already
Yeah, look here, in the last picture, you can see a T3 manifold gasket.
http://www.ebay.com/itm/GT22V-GT2256V-Iv...ff&vxp=mtr
The price and origin would keep me from buying it though. At 50% maybe.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
07-22-2014, 01:43 PM
#13
I actually broke down and bought a K26 off a 300SD on eBay for $150 with shipping included. Going to try it out first since its bolt on and I need to change my turbo drain seal anyways. If I am not satisfied then I will probably go for the GT2256V.
This post was last modified: 07-22-2014, 02:04 PM by snowbrd84.
Yeah, its a china turbo, but I did see one just like it on eBay like a week ago that was an oem from a Renault and it did have a t3 also. Cant remember what year it was. Guessing they were a euro only model. Looks like it is clocked just about right too.
I actually broke down and bought a K26 off a 300SD on eBay for $150 with shipping included. Going to try it out first since its bolt on and I need to change my turbo drain seal anyways. If I am not satisfied then I will probably go for the GT2256V.
07-22-2014, 08:56 PM
#14
I can't guarantee that it'll be available later. If I find an adapter that's affordable it'll be used by me.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
I can appreciate the simplicity of bolt-on. If my 2256 were then it'd already be bolted into something. I hope it solves your problem.
I can't guarantee that it'll be available later. If I find an adapter that's affordable it'll be used by me.
'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
07-24-2014, 04:47 PM
#15
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
K26 turbos are a pretty bad bottle neck. I don't mean to rain on your parade, but me and a friend have found this out. We just turned up his 300SD, and the KKK turbo cant keep up and all, and gets very hot. We don't have a pyro yet, but honestly I am kind of scared to see how hot it is getting
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
07-29-2014, 11:55 AM
#16
(07-24-2014, 04:47 PM)MFSuper90 K26 turbos are a pretty bad bottle neck. I don't mean to rain on your parade, but me and a friend have found this out. We just turned up his 300SD, and the KKK turbo cant keep up and all, and gets very hot. We don't have a pyro yet, but honestly I am kind of scared to see how hot it is getting
Got the K26 installed yesterday and drove it to work. Not lightning in a bottle, but I can definitely feel it picking up quicker and gets to max boost much faster than the Garrett did. It does run hotter, but I am pretty sure thats because I havent hooked up my manual boost controller. The Garrett set at 13psi would rarely break 1000. The K26 maxing at the stock 10psi heats up to around 1050-1100 on the highway doing 65-70. Should cool down a lot with a little more boost.
I will still end up doing the GT2256V, but I am going to wait until after I regear to 4.56. 3.73 gears with 32" tires just doesnt work, doesnt hit the powerband in 3rd gear until way too late.
(07-24-2014, 04:47 PM)MFSuper90 K26 turbos are a pretty bad bottle neck. I don't mean to rain on your parade, but me and a friend have found this out. We just turned up his 300SD, and the KKK turbo cant keep up and all, and gets very hot. We don't have a pyro yet, but honestly I am kind of scared to see how hot it is getting
Got the K26 installed yesterday and drove it to work. Not lightning in a bottle, but I can definitely feel it picking up quicker and gets to max boost much faster than the Garrett did. It does run hotter, but I am pretty sure thats because I havent hooked up my manual boost controller. The Garrett set at 13psi would rarely break 1000. The K26 maxing at the stock 10psi heats up to around 1050-1100 on the highway doing 65-70. Should cool down a lot with a little more boost.
I will still end up doing the GT2256V, but I am going to wait until after I regear to 4.56. 3.73 gears with 32" tires just doesnt work, doesnt hit the powerband in 3rd gear until way too late.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)