MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
Color change, need opinions.
So I am getting my car fixed, rust fixed, and repainted.
It is charcoal grey, and i am seriously debating making it black or midnight blue.
Give me your opinions guys!
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
06-09-2014, 01:33 PM |
|
MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
RE: Color change, need opinions.
I have tan interior, but then again dark colors kind of compliment the lighter interior in my opinion.
But I went and talked to the fella today, and to half ass match my old charcoal grey doors, I might end up having to go with black because it would be much more expensive to have to take all the doors apart and match the exterior. Where as black and the grey will blend enough to be hardly noticeable.
And simpler, I am not a light colored car kinda person. Darker the better  Even though they suck to keep clean since I live on a dirt road, but I don't care I love my dark colors.
Im not sure what I am doing yet, he is going to quote me to repaint it the current color and quote me to repaint it black.
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
06-09-2014, 04:48 PM |
|
E308L
K26-2

Posts: 39
Joined: Jan 2014
Location: central California
|
RE: Color change, need opinions.
I really like the charcoal grey, I almost bought a local sedan over the wagon I got just cuz it was that color and seemed cherry on the outside but after looking it was obviously a repaint and had belonged to a Swisher smoker. I vote for original color and then you also have matching door jambs, engine bay etc
|
|
06-09-2014, 09:30 PM |
|
MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
RE: Color change, need opinions.
Yeah, I do really like charcoal grey. I'm not sure yet. I'll have to see the price difference
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
06-10-2014, 07:48 AM |
|
MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
RE: Color change, need opinions.
All of the above "close to grey" colors are really making me second guess changing my color. I have always liked the grey, but kinda wanted something that would be different.
But you all are starting to talk me out of it
I think I would have a different mindset on the grey if it wasn't faded and scratched up on my car. I am really leaning towards a shade of grey now
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
06-12-2014, 10:17 AM |
|
MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
RE: Color change, need opinions.
That looks like what my car should have looked like new, that one may be a hair darker.
I am really kind of shying away from black the more I think about it. We live on a dirt road, and that thing would be dirty before it even got out of my driveway..
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
06-12-2014, 12:34 PM |
|
sassparilla_kid
diesel > all other fuels
    
Posts: 1,618
Joined: Oct 2011
Location: Fresno, California
|
RE: Color change, need opinions.
Get the hood painted satin like rallye car style
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
|
|
06-22-2014, 05:38 PM |
|
MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
RE: Color change, need opinions.
Well fellas, the verdict is in, and it hurt.
The body shop estimated to a tune of $4,000 IF everything goes as planned with no snags.
I am not going to spend that kind of money on a car that's only worth 3/4 of the paint job.
I have a buddy that has a decent body shop, so I am going to see if he can pull then dent out and repaint my extra door and call it a day.
Kind of a bummer
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
06-23-2014, 08:55 PM |
|
JB3
Superturbo
    
Posts: 1,795
Joined: Apr 2009
Location: CNY / RI
|
RE: Color change, need opinions.
get a maaco quote on a location that has excellent reviews
the big chains are always cheaper big time, with varying degrees in quality. if you do all the sanding prep yourself, a quality job of just painting could be had. either way you will be spending more than one of these cars is worth, its gonna be a if you love the car thing
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(This post was last modified: 08-10-2014, 06:00 AM by JB3.)
|
|
08-10-2014, 05:58 AM |
|
MFSuper90
Budget Builder
    
Posts: 1,533
Joined: May 2010
Location: MOV, Ohio
|
RE: Color change, need opinions.
I ended up just getting the dent pulled out and repainted where it was dented and my roof (it was about faded off). All that for $800, I am pleased with it. It looks pretty nice again
'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler 
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted
|
|
08-10-2014, 09:30 AM |
|
|