STD Other Projects OM606 into W108 280SE

OM606 into W108 280SE

OM606 into W108 280SE

 
  • 2 Vote(s) - 3 Average
 
pryantcc
TA 0301

63
06-01-2014, 04:44 PM #20
Drive shaft sorted!
The original shaft is used up to the carrier bearing, and it turned out that the splines on the shaft which came with the manual gearbox match it, so my very good friend just shortened the front section of the shaft which belongs to the gearbox. You can see how it was before and how it is now in the photos below.

[Image: re_P1010262_zps72732a43.jpg]

[Image: re_P1010263_zpscc299f5b.jpg]

1992 W201 190D 2.0L and 1971 W108 280SE with OM606, electronic pump and 6 speed manual gearbox.
pryantcc
06-01-2014, 04:44 PM #20

Drive shaft sorted!
The original shaft is used up to the carrier bearing, and it turned out that the splines on the shaft which came with the manual gearbox match it, so my very good friend just shortened the front section of the shaft which belongs to the gearbox. You can see how it was before and how it is now in the photos below.

[Image: re_P1010262_zps72732a43.jpg]

[Image: re_P1010263_zpscc299f5b.jpg]


1992 W201 190D 2.0L and 1971 W108 280SE with OM606, electronic pump and 6 speed manual gearbox.

 
  • 2 Vote(s) - 3 Average

Messages In This Thread
OM606 into W108 280SE - by pryantcc - 04-29-2014, 06:04 AM
RE: OM606 into W108 280SE - by maxypriest - 04-29-2014, 09:24 AM
RE: OM606 into W108 280SE - by pryantcc - 04-29-2014, 10:14 AM
RE: OM606 into W108 280SE - by Tito - 05-02-2014, 09:40 AM
RE: OM606 into W108 280SE - by pryantcc - 05-06-2014, 05:13 AM
RE: OM606 into W108 280SE - by pryantcc - 05-07-2014, 03:50 PM
RE: OM606 into W108 280SE - by waz - 05-08-2014, 09:50 AM
RE: OM606 into W108 280SE - by pryantcc - 05-08-2014, 01:57 PM
RE: OM606 into W108 280SE - by hooblah - 05-08-2014, 10:22 AM
RE: OM606 into W108 280SE - by mario - 05-11-2014, 10:37 PM
RE: OM606 into W108 280SE - by pryantcc - 05-12-2014, 06:47 AM
RE: OM606 into W108 280SE - by maxypriest - 05-12-2014, 01:08 PM
RE: OM606 into W108 280SE - by maxypriest - 05-13-2014, 08:00 AM
RE: OM606 into W108 280SE - by pryantcc - 05-15-2014, 05:41 PM
RE: OM606 into W108 280SE - by pryantcc - 05-23-2014, 02:46 AM
RE: OM606 into W108 280SE - by maxypriest - 05-23-2014, 06:57 AM
RE: OM606 into W108 280SE - by The Stig - 05-23-2014, 08:45 AM
RE: OM606 into W108 280SE - by pryantcc - 05-23-2014, 01:54 PM
RE: OM606 into W108 280SE - by pryantcc - 05-24-2014, 05:38 PM
RE: OM606 into W108 280SE - by pryantcc - 06-01-2014, 04:44 PM
RE: OM606 into W108 280SE - by maxypriest - 06-03-2014, 07:23 AM
RE: OM606 into W108 280SE - by Simpler=Better - 06-03-2014, 09:07 AM
RE: OM606 into W108 280SE - by pryantcc - 06-04-2014, 03:01 AM
RE: OM606 into W108 280SE - by pryantcc - 08-17-2014, 04:22 PM
RE: OM606 into W108 280SE - by pryantcc - 09-07-2014, 03:09 PM
RE: OM606 into W108 280SE - by Petar - 09-08-2014, 08:43 AM
RE: OM606 into W108 280SE - by pryantcc - 09-10-2014, 08:02 AM
RE: OM606 into W108 280SE - by pryantcc - 11-30-2014, 07:57 AM
RE: OM606 into W108 280SE - by Vanster - 01-06-2015, 03:09 PM
RE: OM606 into W108 280SE - by pryantcc - 01-11-2015, 03:39 PM
RE: OM606 into W108 280SE - by pryantcc - 02-02-2015, 08:30 AM
RE: OM606 into W108 280SE - by ho55 - 02-02-2015, 12:27 PM
RE: OM606 into W108 280SE - by mario - 02-02-2015, 02:29 PM
Users browsing this thread:
 4 Guest(s)
Users browsing this thread:
 4 Guest(s)