OM606 into W108 280SE
OM606 into W108 280SE
05-12-2014, 01:08 PM
#12
The 124 tooth counter can be fitted to the 606 crank position sensor hole, which is the one you are playing with. Some mods needed.
And yes, you either need to trim the crank or recess the flywheel to fit a lot of flywheels!
Ps, your rear crank seal looks like it's working well! Mine is fairly oily.... Will have to replace....
This post was last modified: 05-12-2014, 01:13 PM by maxypriest.
W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
05-12-2014, 01:08 PM #12W124 diesels tachos are driven by a sensor that counts the teeth on the flywheel. There is a company that supply's a gizmo that converts this signal to a normal tacho signal. On 124's this is right at the bottom of the bell housing.
The 124 tooth counter can be fitted to the 606 crank position sensor hole, which is the one you are playing with. Some mods needed.
And yes, you either need to trim the crank or recess the flywheel to fit a lot of flywheels!
Ps, your rear crank seal looks like it's working well! Mine is fairly oily.... Will have to replace....
W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
Messages In This Thread
OM606 into W108 280SE - by pryantcc - 04-29-2014, 06:04 AM
RE: OM606 into W108 280SE - by maxypriest - 04-29-2014, 09:24 AM
RE: OM606 into W108 280SE - by pryantcc - 04-29-2014, 10:14 AM
RE: OM606 into W108 280SE - by Tito - 05-02-2014, 09:40 AM
RE: OM606 into W108 280SE - by pryantcc - 05-06-2014, 05:13 AM
RE: OM606 into W108 280SE - by pryantcc - 05-07-2014, 03:50 PM
RE: OM606 into W108 280SE - by waz - 05-08-2014, 09:50 AM
RE: OM606 into W108 280SE - by pryantcc - 05-08-2014, 01:57 PM
RE: OM606 into W108 280SE - by hooblah - 05-08-2014, 10:22 AM
RE: OM606 into W108 280SE - by mario - 05-11-2014, 10:37 PM
RE: OM606 into W108 280SE - by pryantcc - 05-12-2014, 06:47 AM
RE: OM606 into W108 280SE - by maxypriest - 05-12-2014, 01:08 PM
RE: OM606 into W108 280SE - by maxypriest - 05-13-2014, 08:00 AM
RE: OM606 into W108 280SE - by pryantcc - 05-15-2014, 05:41 PM
RE: OM606 into W108 280SE - by pryantcc - 05-23-2014, 02:46 AM
RE: OM606 into W108 280SE - by maxypriest - 05-23-2014, 06:57 AM
RE: OM606 into W108 280SE - by The Stig - 05-23-2014, 08:45 AM
RE: OM606 into W108 280SE - by pryantcc - 05-23-2014, 01:54 PM
RE: OM606 into W108 280SE - by pryantcc - 05-24-2014, 05:38 PM
RE: OM606 into W108 280SE - by pryantcc - 06-01-2014, 04:44 PM
RE: OM606 into W108 280SE - by maxypriest - 06-03-2014, 07:23 AM
RE: OM606 into W108 280SE - by Simpler=Better - 06-03-2014, 09:07 AM
RE: OM606 into W108 280SE - by pryantcc - 06-04-2014, 03:01 AM
RE: OM606 into W108 280SE - by pryantcc - 08-17-2014, 04:22 PM
RE: OM606 into W108 280SE - by pryantcc - 09-07-2014, 03:09 PM
RE: OM606 into W108 280SE - by Petar - 09-08-2014, 08:43 AM
RE: OM606 into W108 280SE - by pryantcc - 09-10-2014, 08:02 AM
RE: OM606 into W108 280SE - by pryantcc - 11-30-2014, 07:57 AM
RE: OM606 into W108 280SE - by Vanster - 01-06-2015, 03:09 PM
RE: OM606 into W108 280SE - by pryantcc - 01-11-2015, 03:39 PM
RE: OM606 into W108 280SE - by pryantcc - 02-02-2015, 08:30 AM
RE: OM606 into W108 280SE - by ho55 - 02-02-2015, 12:27 PM
RE: OM606 into W108 280SE - by mario - 02-02-2015, 02:29 PM
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Users browsing this thread:
5 Guest(s)
5 Guest(s)