STD Tuning Engine 190D Turbo -92 question

190D Turbo -92 question

190D Turbo -92 question

 
  • 0 Vote(s) - 0 Average
 
Tymbark
Naturally-aspirated

3
03-27-2014, 11:17 AM #1
Hello, I have a 190d turbo -92 and was wondering why in the video
(episode 1) he said that the ones past 92 are all low emitted and you can't really do anything to them, my question is why? Why can't you change anything to them? Problem with the MOT tests? I was thinking about adding an Intercooler, 7.5-8mm element and a larger turbo to my 190 but after hearing that in the video made me rethink.
Tymbark
03-27-2014, 11:17 AM #1

Hello, I have a 190d turbo -92 and was wondering why in the video
(episode 1) he said that the ones past 92 are all low emitted and you can't really do anything to them, my question is why? Why can't you change anything to them? Problem with the MOT tests? I was thinking about adding an Intercooler, 7.5-8mm element and a larger turbo to my 190 but after hearing that in the video made me rethink.

raysorenson
Superturbo

1,162
03-28-2014, 02:50 PM #2
They said something about the car being classified as a low emissions vehicle so they couldn't do anything to the engine. If your engine has angled prechambers then it's probably low emissions too.
raysorenson
03-28-2014, 02:50 PM #2

They said something about the car being classified as a low emissions vehicle so they couldn't do anything to the engine. If your engine has angled prechambers then it's probably low emissions too.

Tymbark
Naturally-aspirated

3
03-31-2014, 06:48 AM #3
(03-28-2014, 02:50 PM)raysorenson They said something about the car being classified as a low emissions vehicle so they couldn't do anything to the engine. If your engine has angled prechambers then it's probably low emissions too.


I guess my precambers are indeed angled as you said, is it impossible to do anything to the engine? Whats the difference that makes the low emission "usless" when it comes to tuning?
[Image: kc6hb4K.jpg]
This post was last modified: 03-31-2014, 06:49 AM by Tymbark.
Tymbark
03-31-2014, 06:48 AM #3

(03-28-2014, 02:50 PM)raysorenson They said something about the car being classified as a low emissions vehicle so they couldn't do anything to the engine. If your engine has angled prechambers then it's probably low emissions too.


I guess my precambers are indeed angled as you said, is it impossible to do anything to the engine? Whats the difference that makes the low emission "usless" when it comes to tuning?
[Image: kc6hb4K.jpg]

hansendk
TA 0301

51
03-31-2014, 08:56 AM #4
I don't think that's the problem its a country problem, every country have different rules even different states in the US. its like petrol cars 1991 and up (if I remember right) all have to be with electronic fuel injection inside EU, long live the environment.

your lucky in Sweden you can do a lot if I did the same in Denmark = no plates and a big bill for tax
try and look under projects at Tito OM 603 same engine just 1 cylinder more
hansendk
03-31-2014, 08:56 AM #4

I don't think that's the problem its a country problem, every country have different rules even different states in the US. its like petrol cars 1991 and up (if I remember right) all have to be with electronic fuel injection inside EU, long live the environment.

your lucky in Sweden you can do a lot if I did the same in Denmark = no plates and a big bill for tax
try and look under projects at Tito OM 603 same engine just 1 cylinder more

Tito
Holset

354
03-31-2014, 03:38 PM #5
Lol, I didn't even know there where angled pre chambers. I wonder what's the reason of that. I'm fairly sure my 603 doesn't have so much angle on the pre cambers... Also it's a non-turbo european engine with no EGR
Tito
03-31-2014, 03:38 PM #5

Lol, I didn't even know there where angled pre chambers. I wonder what's the reason of that. I'm fairly sure my 603 doesn't have so much angle on the pre cambers... Also it's a non-turbo european engine with no EGR

raysorenson
Superturbo

1,162
03-31-2014, 09:33 PM #6
Are you asking about the technical ins and outs of modding the 602 or are you asking about Swedish smog laws? As far as tech goes, the newer, the better. Angled chambers are way better at everything. There have been numerous additional improvements to the 602 during it's production run.
raysorenson
03-31-2014, 09:33 PM #6

Are you asking about the technical ins and outs of modding the 602 or are you asking about Swedish smog laws? As far as tech goes, the newer, the better. Angled chambers are way better at everything. There have been numerous additional improvements to the 602 during it's production run.

Tymbark
Naturally-aspirated

3
04-07-2014, 02:21 PM #7
(03-31-2014, 09:33 PM)raysorenson Are you asking about the technical ins and outs of modding the 602 or are you asking about Swedish smog laws? As far as tech goes, the newer, the better. Angled chambers are way better at everything. There have been numerous additional improvements to the 602 during it's production run.

I was asking about modding the engine, because in the video he said that the low emssion engine (angled precambers) can't be done any modding to.Smile
Tymbark
04-07-2014, 02:21 PM #7

(03-31-2014, 09:33 PM)raysorenson Are you asking about the technical ins and outs of modding the 602 or are you asking about Swedish smog laws? As far as tech goes, the newer, the better. Angled chambers are way better at everything. There have been numerous additional improvements to the 602 during it's production run.

I was asking about modding the engine, because in the video he said that the low emssion engine (angled precambers) can't be done any modding to.Smile

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)