STD Other FS / WTB / Buying guides FS: A BUNCH OF MB PARTS FOR SALE

FS: A BUNCH OF MB PARTS FOR SALE

FS: A BUNCH OF MB PARTS FOR SALE

 
  • 0 Vote(s) - 0 Average
 
Greazzer
Superturbo

1,277
01-29-2014, 04:09 PM #1
Today, after about three hours of tearing my garage apart - garage cleaning looking for the tiniest of a part for a forum member, I came upon the following. I am home today, getting over the flu and our snow crisis in S.C. I am selling pretty cheap since I can now see my garage floor. Look at my pictures – major miracles … Cheap is defined as what I have seen on Ebay and the respective bids and I knocked off a bunch. The pricing below does NOT include shipping or PP fees. I try my best to ship the cheapest method possible. I will take as many pictures as folks want for any particular part. Please PM me.
Except the last item, all items are for the W123 Chassis Application / OM617.9XX engine
Two (2) foam head rest inserts nice condition: $10.00
One (1) blue MB Tex armrest, without push button: $15.00
New 80C Thermostat, Made in Germany, with New Gasket: $10.00
Differential mount – rubber: $10.00
New MB Blue Leather Key Fob: $5.00
Two (2) lower fender molding, L&R: $10.00
Steel Injector lines, entire set with brackets: $15.00
Front lower bumper valances with plastic bumper insert (above bumper): $15.00
First Aid Kit Box: $5.00
Climate Control Unit (this came from my 1985 MB 300D) it worked when removed (after I totaled my car). Since it has been sitting, I am selling it cheap so I am assuming it still works: $20.00
Glove box door with all hardware (nice closing door): $15.00
Washer Bottles, Medium: $20 – ideal for a Water + Methanol Set-up
Washer Bottle, Small (standard size): $10.00
Passenger side manual mirror: $40.00 AND it includes the chrome interior piece (shaped like a triangle) which still has the plastic bayonet holder still in perfect condition, and knob. The chrome piece is near perfect.
W126 NEW 3 pieces, Mercedes Dealer Parts, still have packaging: door handle interior pull, black plastic insert, and black knob. I looked these up and I was shocked to see that these would cost almost $100 with shipping. $25 SHIPPED CONUS
Attached Files
Image(s)
       

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
01-29-2014, 04:09 PM #1

Today, after about three hours of tearing my garage apart - garage cleaning looking for the tiniest of a part for a forum member, I came upon the following. I am home today, getting over the flu and our snow crisis in S.C. I am selling pretty cheap since I can now see my garage floor. Look at my pictures – major miracles … Cheap is defined as what I have seen on Ebay and the respective bids and I knocked off a bunch. The pricing below does NOT include shipping or PP fees. I try my best to ship the cheapest method possible. I will take as many pictures as folks want for any particular part. Please PM me.
Except the last item, all items are for the W123 Chassis Application / OM617.9XX engine
Two (2) foam head rest inserts nice condition: $10.00
One (1) blue MB Tex armrest, without push button: $15.00
New 80C Thermostat, Made in Germany, with New Gasket: $10.00
Differential mount – rubber: $10.00
New MB Blue Leather Key Fob: $5.00
Two (2) lower fender molding, L&R: $10.00
Steel Injector lines, entire set with brackets: $15.00
Front lower bumper valances with plastic bumper insert (above bumper): $15.00
First Aid Kit Box: $5.00
Climate Control Unit (this came from my 1985 MB 300D) it worked when removed (after I totaled my car). Since it has been sitting, I am selling it cheap so I am assuming it still works: $20.00
Glove box door with all hardware (nice closing door): $15.00
Washer Bottles, Medium: $20 – ideal for a Water + Methanol Set-up
Washer Bottle, Small (standard size): $10.00
Passenger side manual mirror: $40.00 AND it includes the chrome interior piece (shaped like a triangle) which still has the plastic bayonet holder still in perfect condition, and knob. The chrome piece is near perfect.
W126 NEW 3 pieces, Mercedes Dealer Parts, still have packaging: door handle interior pull, black plastic insert, and black knob. I looked these up and I was shocked to see that these would cost almost $100 with shipping. $25 SHIPPED CONUS

Attached Files
Image(s)
       

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

EmJay
Holset

299
02-01-2014, 11:55 AM #2
Hey Greazzer, any chance I can get a closeup pic of the climate control unit? I'm possibly needing one for my 86 190. I don't know if the 124 unit will also work in the 201. The only ones I can find locally are 89+ (201 and 124) and they use different connectors than my 86 does.
This post was last modified: 02-01-2014, 11:56 AM by EmJay.
EmJay
02-01-2014, 11:55 AM #2

Hey Greazzer, any chance I can get a closeup pic of the climate control unit? I'm possibly needing one for my 86 190. I don't know if the 124 unit will also work in the 201. The only ones I can find locally are 89+ (201 and 124) and they use different connectors than my 86 does.

Greazzer
Superturbo

1,277
02-01-2014, 01:08 PM #3
OK, here's an updated list with reduced prices. About half the items sold already:

Two (2) foam head rest inserts nice condition: $8.00
One (1) blue MB Tex armrest, without push button: $10.00
Differential mount – rubber: $8.00
Two (2) lower fender molding, L&R: $8.00
Steel Injector lines, entire set with brackets: $12.00
First Aid Kit Box: $5.00
Washer Bottles, Medium: $15 – ideal for a Water + Methanol Set-up
Washer Bottle, Small (standard size): $5.00
Chrome DRIVER Side interior chrome (shaped like a triangle) which still has the plastic bayonet holder still in perfect condition: $5.00
W126 NEW 3 pieces, Mercedes Dealer Parts, still have packaging: door handle interior pull, black plastic insert, and black knob. I looked these up and I was shocked to see that these would cost almost $100 with shipping. $20 SHIPPED CONUS

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
02-01-2014, 01:08 PM #3

OK, here's an updated list with reduced prices. About half the items sold already:

Two (2) foam head rest inserts nice condition: $8.00
One (1) blue MB Tex armrest, without push button: $10.00
Differential mount – rubber: $8.00
Two (2) lower fender molding, L&R: $8.00
Steel Injector lines, entire set with brackets: $12.00
First Aid Kit Box: $5.00
Washer Bottles, Medium: $15 – ideal for a Water + Methanol Set-up
Washer Bottle, Small (standard size): $5.00
Chrome DRIVER Side interior chrome (shaped like a triangle) which still has the plastic bayonet holder still in perfect condition: $5.00
W126 NEW 3 pieces, Mercedes Dealer Parts, still have packaging: door handle interior pull, black plastic insert, and black knob. I looked these up and I was shocked to see that these would cost almost $100 with shipping. $20 SHIPPED CONUS


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

hey_allen
Naturally-aspirated

4
03-07-2014, 03:12 PM #4
Do you have a picture of the Differential Mount, and is it by any chance interchangeable with the w126 differential mounts?
(I did read the w123 in the top post, but with MB liking to interchange so much...)

If that is part 1233511142, I'm interested. A little research has that as the part for my car, and the 123 part number prefix looks promising.
This post was last modified: 03-07-2014, 03:21 PM by hey_allen.
hey_allen
03-07-2014, 03:12 PM #4

Do you have a picture of the Differential Mount, and is it by any chance interchangeable with the w126 differential mounts?
(I did read the w123 in the top post, but with MB liking to interchange so much...)

If that is part 1233511142, I'm interested. A little research has that as the part for my car, and the 123 part number prefix looks promising.

Greazzer
Superturbo

1,277
03-07-2014, 10:04 PM #5
My bad for not updating this thread.

Almost everything sold the first or second week.

What I got left is

1. One middle sized resevoir tank, ideal for M+W
2. One regular sized resevoir tank
3. head rest foam inserts
4. The new MB Dealer W126 parts
5. Molding pieces
6. Some miscellaneous pieces.

I have pictures of what remains if you are interested in any of that remaining stuff.

Thanks,

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
03-07-2014, 10:04 PM #5

My bad for not updating this thread.

Almost everything sold the first or second week.

What I got left is

1. One middle sized resevoir tank, ideal for M+W
2. One regular sized resevoir tank
3. head rest foam inserts
4. The new MB Dealer W126 parts
5. Molding pieces
6. Some miscellaneous pieces.

I have pictures of what remains if you are interested in any of that remaining stuff.

Thanks,


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

hey_allen
Naturally-aspirated

4
03-08-2014, 10:41 AM #6
(03-07-2014, 10:04 PM)Greazzer My bad for not updating this thread.

Almost everything sold the first or second week.

What I got left is W126 NEW 3 pieces, Mercedes Dealer Parts, still have packaging: door handle interior pull, black plastic insert, and black knob. I looked these up and I was shocked to see that these would cost almost $100 with shipping. $20 SHIPPED CONUS

1. One middle sized resevoir tank, ideal for M+W
2. One regular sized resevoir tank
3. head rest foam inserts
4. The new MB Dealer W126 parts
5. Molding pieces
6. Some miscellaneous pieces.

I have pictures of what remains if you are interested in any of that remaining stuff.

Thanks,

Ah, my loss then.

As to the other bits, I'm possibly interested in the door handle parts, though I don't need any at the moment.

I'm not sure on any of the other stuff, since as I'd said, I have w126's and it's always random chance what fits one from a w123 (or earlier some times.)
hey_allen
03-08-2014, 10:41 AM #6

(03-07-2014, 10:04 PM)Greazzer My bad for not updating this thread.

Almost everything sold the first or second week.

What I got left is W126 NEW 3 pieces, Mercedes Dealer Parts, still have packaging: door handle interior pull, black plastic insert, and black knob. I looked these up and I was shocked to see that these would cost almost $100 with shipping. $20 SHIPPED CONUS

1. One middle sized resevoir tank, ideal for M+W
2. One regular sized resevoir tank
3. head rest foam inserts
4. The new MB Dealer W126 parts
5. Molding pieces
6. Some miscellaneous pieces.

I have pictures of what remains if you are interested in any of that remaining stuff.

Thanks,

Ah, my loss then.

As to the other bits, I'm possibly interested in the door handle parts, though I don't need any at the moment.

I'm not sure on any of the other stuff, since as I'd said, I have w126's and it's always random chance what fits one from a w123 (or earlier some times.)

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)