Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fail thread
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#1
Fail thread
(Try to post original stuff, not just recycled FailBlog pictures...)

Wal-Mart at 3am.

.jpg   shopping cart failS.jpg (Size: 87.68 KB / Downloads: 6,900)
(This post was last modified: 07-14-2009, 09:16 AM by ForcedInduction.)
07-14-2009, 09:16 AM
Find Reply
totaldisaster Offline
lightly modded OM606
***


Posts: 211
Joined: Dec 2008
Location: na
#2
RE: Fail thread
Its hard to get pics of some of the best fail moments. But I was there during stock hours at Home Depot when a forklift operator dropped an entire f&*cking pallet of driveway tar on top of himself and that corner of the store..... holy sh^t. Epic
07-16-2009, 11:04 AM
Find Reply
Diesel Offline
Unregistered


Posts: 16
Joined: May 2009
Location: Kentucky
#3
RE: Fail thread
Is the left rear caliper on my 220d applicable?Tongue

[Image: 3685294161_b49c2d68ae_o.jpg]


I had to pry if off the rotor with a 4' pry-bar.
But at least the car will go faster now without it dragging.
07-16-2009, 04:46 PM
Website Find Reply
DeliveryValve Offline
Superturbo
*****


Posts: 1,338
Joined: Feb 2008
Location:
#4
RE: Fail thread
At least you still have a lot of meat left on those brake pads. Tongue
Gota love Mercedes Diesels!



.
(This post was last modified: 07-17-2009, 01:08 AM by DeliveryValve.)
07-17-2009, 01:08 AM
Find Reply
kamel Offline
Naturally-aspirated SUCKS
***


Posts: 176
Joined: Apr 2008
Location:
#5
RE: Fail thread
Spotted this on the 210 freeway, followed him just to get a pic.
[Image: DSC05578.jpg]
'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs
07-18-2009, 10:05 PM
Website Find Reply
JB3 Offline
Superturbo
*****


Posts: 1,795
Joined: Apr 2009
Location: CNY / RI
#6
RE: Fail thread
What the heck is that thing anyway? I thought at first a dresser, but it looks like a cross between an arcade machine and a TV console. Bet you he loads things different from now on!

Fully restored 1973 Karmann Ghia meets East Tulsa OK ice storm. maybe next time it gets parked in the garage.

.jpg   ghia1.jpg (Size: 99.23 KB / Downloads: 6,445)

.jpg   ghia2.jpg (Size: 112.05 KB / Downloads: 6,401)

.jpg   ghia3.jpg (Size: 94.47 KB / Downloads: 6,331)
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

(This post was last modified: 07-19-2009, 09:10 AM by JB3.)
07-19-2009, 09:06 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#7
RE: Fail thread
(07-19-2009, 09:06 AM)dropnosky Wrote: What the heck is that thing anyway?

Looks like an arcade console.
07-19-2009, 07:01 PM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#8
RE: Fail thread
Lovecrap fail

Quote:07-18-2009
300d stalls at idle.

Hi Everyone,

A cryptic problem brings me to your forum...I have a 1983 300d that I restored with an engine from an '84 300d. The car is fantastic. It has developed a problem that I can't seem to figure out:

I currently have a Lovecraft conversion installed and use a combo. of oil/diesel. I noticed that it has gradually lost power over a couple of months to the point that it feels like I'm driving a 240 uphill in a headwind!

A friend and I took the injectors apart, one by one and cleaned them up. This didn't make a whole lot of difference. It got to the point where I could drive for about 7 miles until I would have to shift the car into neutral at stop lights etc. to keep from stalling. I thought that it was probably junk from oil clogging up the system, so I drained the tank and put in a new tank screen, in-line filter and cleaned the Lovecraft filter. While doing all of this, I discovered that the small fuel pump that pulls fuel from the tank to the Lovecraft conversion was not functioning properly and replaced it.

I put two gallons of diesel fuel into the tank, along with a quart of Lubro Molly, thinking this would do it. Much to my horror, the car will not stay running. I have to press the accelerator to the floor to start it. As soon as I take my foot off of the gas pedal, the car quits immediately. I purged all of the air from the system etc. and am at a complete loss. I' thinking it's either my injection pump going out or perhaps I need a new set of injectors? I read where the shutoff valve sometimes gets stuck closed but I don't think the car would start at all if that was my problem.

Anyway, that's about it. I do apologize for the lengthy post, but want to get as many questions out of the way as possible. Thanks in advance to anyone who might have an idea and can take the time to read this. I look forward to participating more with you all. Mahalo!

http://mercedesforum.com/forum/showthread.php?t=37797
07-21-2009, 05:43 AM
Find Reply
GREASY_BEAST Offline
Holset
****


Posts: 411
Joined: Mar 2008
Location:
#9
RE: Fail thread
(07-21-2009, 05:43 AM)ForcedInduction Wrote: Lovecrap fail

LOL classic IP fail. Mine did the same thing due to a watery batch of diesel on a road trip. Wouldn't idle under 2000rpm, near impossible to start. Bummer.
07-21-2009, 07:07 PM
Find Reply
JB3 Offline
Superturbo
*****


Posts: 1,795
Joined: Apr 2009
Location: CNY / RI
#10
RE: Fail thread
1981 benz meets bullet in neighborhood gun play. Entered windshield, exited pass front window.

.jpg   240dpartscarwindshield.jpg (Size: 71.27 KB / Downloads: 6,237)
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

07-21-2009, 08:03 PM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 589
Joined: May 2009
Location: PNW
#11
RE: Fail thread
(07-21-2009, 08:03 PM)dropnosky Wrote: 1981 benz meets bullet in neighborhood gun play. Entered windshield, exited pass front window.

do you know who's car that is?
W123 Mods: 4 speed ** AN braided hoses/lines almost everywhere ** powder coated valve cover ** manual climate control ** better stereo ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
07-22-2009, 12:08 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#12
RE: Fail thread
[Image: celebrity-pictures-michael-c-hall-tequil...esting.jpg]
07-22-2009, 04:20 AM
Find Reply
JB3 Offline
Superturbo
*****


Posts: 1,795
Joined: Apr 2009
Location: CNY / RI
#13
RE: Fail thread
(07-22-2009, 12:08 AM)SurfRodder Wrote:
(07-21-2009, 08:03 PM)dropnosky Wrote: 1981 benz meets bullet in neighborhood gun play. Entered windshield, exited pass front window.

do you know who's car that is?

It was mine, a parts car I bought for my 4-speed swap. I had looked at it the previous week and given the guy money, then apparently there was some shooting during the week, and he called me super apologetic about it. He did not live in the greatest area.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

07-22-2009, 08:20 AM
Find Reply
winmutt Offline
bitbanger
********


Posts: 3,466
Joined: Dec 2008
Location: Atlanta GA
#14
RE: Fail thread
(07-22-2009, 04:20 AM)ForcedInduction Wrote: [Image: celebrity-pictures-michael-c-hall-tequil...esting.jpg]

We have a new front page pic!
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
07-26-2009, 09:45 AM
Website Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#15
RE: Fail thread
He got what he asked for. (Note: Attachment #1000!)

.jpg   P7260001a.jpg (Size: 48.52 KB / Downloads: 5,931)
.jpg   Chevy fail1 7-26-09.jpg (Size: 14.88 KB / Downloads: 8,303)

From my California trip.

.jpg   fakeowlfail.JPG (Size: 208.41 KB / Downloads: 5,806)
(This post was last modified: 07-26-2009, 10:39 PM by ForcedInduction.)
07-26-2009, 10:34 PM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#16
RE: Fail thread
Bandimere sign fail.

.jpg   P8010003 sign fail.jpg (Size: 65.72 KB / Downloads: 5,648)

Try getting that time again!

.jpg   P8010022 9.999.jpg (Size: 57.23 KB / Downloads: 5,553)
08-01-2009, 04:08 PM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 589
Joined: May 2009
Location: PNW
#17
RE: Fail thread
I saw this one the other day on my way into class... It doesnt look like much of a hill, but it was enough for me to curb my wheels.... when I got out, I saw this dudes attempt and laughed...had to get a pic...
.jpg   SP_A0159.jpg (Size: 406.97 KB / Downloads: 5,641)


One I saw at the part yard a few months ago...

.jpg   ferd1.jpg (Size: 193.05 KB / Downloads: 5,483)
a little closer...

.jpg   SP_A0127.jpg (Size: 483.99 KB / Downloads: 5,431)
W123 Mods: 4 speed ** AN braided hoses/lines almost everywhere ** powder coated valve cover ** manual climate control ** better stereo ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
(This post was last modified: 08-06-2009, 01:33 AM by SurfRodder.)
08-06-2009, 01:23 AM
Find Reply
holmz88 Offline
'82 300DT


Posts: 8
Joined: Jul 2009
Location: Illinois
#18
RE: Fail thread
Quote:a little closer...

Out of curiosity do you perchance know if that has the MB tranny, I've always wondered if a Ford tranny would be a direct bolt to an MB engine with the starter on the pass side...the bolt patters look somewhat similar in pictures but pictures are all I've ever looked at...
08-06-2009, 10:17 AM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 589
Joined: May 2009
Location: PNW
#19
RE: Fail thread
(08-06-2009, 10:17 AM)holmz88 Wrote:
Quote:a little closer...

Out of curiosity do you perchance know if that has the MB tranny, I've always wondered if a Ford tranny would be a direct bolt to an MB engine with the starter on the pass side...the bolt patters look somewhat similar in pictures but pictures are all I've ever looked at...


I didn't think to look, but I doubt it'd be that easy... unless they (Ford/MB) were in cahoots, I doubt it'd be a direct swap... but if it's close, it'd be easier to adapt. If you have an extra ford tranny lying around, you could measure it somehow...I have an extra couple of MB trannys at my parents house that I could measure, but it'd still be better to have'em side by side.

I'm thinking about slicing the front inch or so off of my toasted auto trans and trying to adapt that to another manual, ideally something with overdrive... If I could get that going, I'd be stoked...
W123 Mods: 4 speed ** AN braided hoses/lines almost everywhere ** powder coated valve cover ** manual climate control ** better stereo ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
08-06-2009, 11:10 AM
Find Reply
holmz88 Offline
'82 300DT


Posts: 8
Joined: Jul 2009
Location: Illinois
#20
RE: Fail thread
Yea one never knows, I'm hoping I'm a long way from having to take my tranny out and all I have laying around is a lot of manual and automatic GM transmission so I have no way of comparing to a ford, but I thought that when it comes down to replacing mine that an OD ford tranny would be much easier to come by than a MB tranny if it were at all possible.
08-06-2009, 11:34 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#21
RE: Fail thread
Redbox fail.


Attached Files
.jpg   RBfail.jpg (Size: 64.43 KB / Downloads: 5,067)
08-13-2009, 07:28 AM
Find Reply
greasenut Offline
Dang Tree Hugger


Posts: 11
Joined: Jun 2009
Location: Upstate NY.
#22
RE: Fail thread
Nothing beats a good edjumacation in spelling.


.jpg   clip_image002.jpg (Size: 26.88 KB / Downloads: 8,513)
08-13-2009, 03:42 PM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#23
RE: Fail thread
"MrBits" of Benzworld fail

.jpg   ozone.jpg (Size: 62.1 KB / Downloads: 7,303)
(This post was last modified: 09-01-2009, 11:18 PM by ForcedInduction.)
09-01-2009, 11:17 PM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 589
Joined: May 2009
Location: PNW
#24
RE: Fail thread

Boise, Denver, ahhh fuk it!
W123 Mods: 4 speed ** AN braided hoses/lines almost everywhere ** powder coated valve cover ** manual climate control ** better stereo ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
09-02-2009, 12:50 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#25
RE: Fail thread
Efficiency and productivity fail.

Today my boss gave me a 93mile (round trip) service call to Bennett, for a single mudflap. And you wonder why it costs so much to ship something across the country. Rolleyes
At least I got 4 hours of easy windshield time. Big Grin
(This post was last modified: 09-18-2009, 02:10 AM by ForcedInduction.)
09-18-2009, 02:08 AM
Find Reply
willbhere4u Offline
Six in a row make her go!
*****


Posts: 2,507
Joined: Apr 2009
Location: mile high
#26
RE: Fail thread
parking fail!


Attached Files
.jpg   Photo0448.jpg (Size: 198.6 KB / Downloads: 4,869)
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
(This post was last modified: 09-21-2009, 07:20 PM by willbhere4u.)
09-21-2009, 07:19 PM
Find Reply
winmutt Offline
bitbanger
********


Posts: 3,466
Joined: Dec 2008
Location: Atlanta GA
#27
RE: Fail thread
Drink and drive much? LOL When we were bringing back the motoroam there was a guy who totally passed out in the parking lot at a Walmart in FL. Ran into a baskart cage. Was fun to watch the cops come and wake him up.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
09-22-2009, 08:20 AM
Website Find Reply
JB3 Offline
Superturbo
*****


Posts: 1,795
Joined: Apr 2009
Location: CNY / RI
#28
RE: Fail thread
Grating VS Bear (kings canyon national park)-

.jpg   beargrate.jpg (Size: 93.17 KB / Downloads: 4,795)

Low overhang VS 30 years of campers and non attentive drivers (sequoia national park, road has since been moved around obstacle)-

.jpg   lowbridge.jpg (Size: 57.69 KB / Downloads: 4,742)

.jpg   campermurderrock.jpg (Size: 69.07 KB / Downloads: 4,669)
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van

09-22-2009, 09:37 AM
Find Reply
willbhere4u Offline
Six in a row make her go!
*****


Posts: 2,507
Joined: Apr 2009
Location: mile high
#29
RE: Fail thread
showing off fail! I saw this at the local autozone


Attached Files
.jpg   Photo0452.jpg (Size: 182.52 KB / Downloads: 4,529)
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
(This post was last modified: 09-22-2009, 09:43 PM by willbhere4u.)
09-22-2009, 09:42 PM
Find Reply
winmutt Offline
bitbanger
********


Posts: 3,466
Joined: Dec 2008
Location: Atlanta GA
#30
RE: Fail thread
Hey man if your parking brakes are out and your parking pawl is shot...
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
09-23-2009, 11:33 AM
Website Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#31
RE: Fail thread
"The transmission is not a kickstand."
09-23-2009, 12:53 PM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#32
RE: Fail thread
"I crashed it. Damn I'm good."

.jpg   Picture 1.jpg (Size: 42.99 KB / Downloads: 4,550)

High Five! Denied.

.jpg   Picture 2.jpg (Size: 42.96 KB / Downloads: 4,464)
10-09-2009, 09:06 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#33
RE: Fail thread
Parking brake fail.

.jpg   10-14-09parkingfailIMG_0015.jpg (Size: 67.69 KB / Downloads: 4,685)

Nissan Cube. Ugliest f-ing car I've ever seen on public roads.
It has hubcaps. HUBCAPS and rear drum brakes for a 2010 model car!

.jpg   LMNuglySOB.jpg (Size: 47.97 KB / Downloads: 4,431)
(This post was last modified: 10-15-2009, 11:45 AM by ForcedInduction.)
10-14-2009, 10:56 PM
Find Reply
willbhere4u Offline
Six in a row make her go!
*****


Posts: 2,507
Joined: Apr 2009
Location: mile high
#34
RE: Fail thread
Nissan cube designer fail!!! some body should be fired!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
10-15-2009, 11:21 AM
Find Reply
DeliveryValve Offline
Superturbo
*****


Posts: 1,338
Joined: Feb 2008
Location:
#35
RE: Fail thread
WVO Fail on a 2006 VW Jetta


.jpg   WVOFail.jpg (Size: 55.46 KB / Downloads: 4,400)



.
Gota love Mercedes Diesels!



.
(This post was last modified: 10-15-2009, 11:48 PM by DeliveryValve.)
10-15-2009, 11:47 PM
Find Reply
1lowdiesel Offline
Unregistered


Posts: 3
Joined: Oct 2009
Location: nj
#36
RE: Fail thread
my own caliper fail off my 05 duramax

[Image: DSC_2857.jpg]
10-16-2009, 08:25 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#37
RE: Fail thread
Middle aged ricer fail.


Attached Files
.jpg   rice.jpg (Size: 49.29 KB / Downloads: 4,253)
10-18-2009, 09:29 PM
Find Reply
winmutt Offline
bitbanger
********


Posts: 3,466
Joined: Dec 2008
Location: Atlanta GA
#38
Photo  RE: Fail thread
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
10-20-2009, 07:49 AM
Website Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#39
RE: Fail thread
Owning halo noobs win.


Attached Files
.jpg   Halo BAD JENNA OWNED1st game1.jpg (Size: 31.89 KB / Downloads: 4,093)
.jpg   Halo BAD JENNA OWNED2nd game1.jpg (Size: 44.65 KB / Downloads: 4,121)
10-25-2009, 10:40 AM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#40
RE: Fail thread
Bridge to nowhere fail. Paid for by Colorado lottery income.


Attached Files
.jpg   BTN.jpg (Size: 72.88 KB / Downloads: 4,109)
(This post was last modified: 10-26-2009, 09:11 PM by ForcedInduction.)
10-26-2009, 09:11 PM
Find Reply
Nick Offline
Big diesel's need lovin' too
*


Posts: 38
Joined: Sep 2009
Location: Southeast Pennsylvania
#41
RE: Fail thread
Guy seafoams his car, and then kills the battery trying to crank is over.

Double fail! Big Grin

Video:
http://www.youtube.com/watch?v=lgo9AnNzt...re=related
1983 300CD "Spike" Stock, as of now.
10-30-2009, 01:46 AM
Find Reply
winmutt Offline
bitbanger
********


Posts: 3,466
Joined: Dec 2008
Location: Atlanta GA
#42
RE: Fail thread
Win!

[Image: 2252.jpg]
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
11-03-2009, 03:43 PM
Website Find Reply
willbhere4u Offline
Six in a row make her go!
*****


Posts: 2,507
Joined: Apr 2009
Location: mile high
#43
RE: Fail thread
can you actually over load a Unimog?


Attached Files
.jpg   overloaded-unimog.jpg (Size: 57.8 KB / Downloads: 18,183)
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
(This post was last modified: 11-03-2009, 08:24 PM by willbhere4u.)
11-03-2009, 08:21 PM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 589
Joined: May 2009
Location: PNW
#44
RE: Fail thread
(11-03-2009, 08:21 PM)willbhere4u Wrote: can you actually over load a Unimog?

obviously not!
W123 Mods: 4 speed ** AN braided hoses/lines almost everywhere ** powder coated valve cover ** manual climate control ** better stereo ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
11-04-2009, 02:24 AM
Find Reply
E300TSC Offline
Turbo-Supercharged
****


Posts: 321
Joined: Oct 2009
Location: Location: Location:
#45
RE: Fail thread
Not UNIMOGs... Smile
11-04-2009, 02:50 PM
Find Reply
willbhere4u Offline
Six in a row make her go!
*****


Posts: 2,507
Joined: Apr 2009
Location: mile high
#46
RE: Fail thread
they are a bit bigger but i still want one
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
11-04-2009, 03:01 PM
Find Reply
JB3 Offline
Superturbo
*****


Posts: 1,795
Joined: Apr 2009
Location: CNY / RI
#47
RE: Fail thread
Special engine modifications-

.jpg   300Dgrillcooler1.jpg (Size: 72.26 KB / Downloads: 4,128)

.jpg   300Dgrillcooler2.jpg (Size: 92.78 KB / Downloads: 4,176)

.jpg   300Dgrillcooler3.jpg (Size: 83.94 KB / Downloads: 4,053)

The trunk is an insulated cooler for drinks
11-05-2009, 06:10 PM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#48
RE: Fail thread
MB owner to MB owner honesty fail, "It runs great, I get 40mpg on the highway and 30mpg in the city!"

.jpg   300d.jpg (Size: 71.63 KB / Downloads: 4,124)

License plate win!

.jpg   MrDiesel licence plate.jpg (Size: 65.26 KB / Downloads: 4,171)
11-07-2009, 11:26 PM
Find Reply
Rudolf_Diesel Offline
Ask me if I care...
****


Posts: 579
Joined: Jun 2009
Location: Southern California
#49
RE: Fail thread
Get your turbo Sound here

.jpg   picture%20203_2.jpg (Size: 66.95 KB / Downloads: 4,050)
It speaks for itself...


.gif   obama-koolaid.gif (Size: 31.35 KB / Downloads: 8,254)
1982 300SD: 304,xxx Super M-pump with 7.5mm elements, 265 Nozzles, GT35 water cooled turbo, M90 Supercharger, A/W Intercooler, Serpentine drive belt, 3" SS exhaust with Magnaflow muffler, 240 breather, AEM dry Filter, Manual Boost Control, EGT / Boost / EMP gauges....Moved on to other projects

1995 F-350 7.3L PSD: 230,xxx 6.0 IC, DIY Stage 1 Injectors, 17* hpop, Tony Wildman Chip, John Wood Trans, 6.4L TC, 3" down pipe, 4" straight exhaust, 310 HP on wheel dyno - 8500# dually: 0-60 in 6.98

Suzuki Samurai: VW 1.9L TD, Trackick doubler transfer case (made by me) 5.8:1 transfer case gears, YJ springs front and rear with rear missing links, wheel base extended 14", diffs welded, some day a VNT.
(This post was last modified: 11-08-2009, 11:30 PM by Rudolf_Diesel.)
11-08-2009, 11:28 PM
Find Reply
ForcedInduction Offline
Banned


Posts: 3,628
Joined: Feb 2008
Location: Hell
#50
RE: Fail thread
Diesel power fail.


Attached Files
.jpg   Picture 1.jpg (Size: 87.8 KB / Downloads: 3,901)
11-10-2009, 04:59 AM
Find Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)