STD Other FS / WTB / Buying guides Superpump builder in USA

Superpump builder in USA

Superpump builder in USA

 
  • 3 Vote(s) - 4.33 Average
 
Pages (3): 1 2 3 Next
dieselmeken
Holset

407
10-09-2013, 05:38 AM #1
As a service to you all in USA, I have made Contact with Larry at http://www.dieselinjectionsystems.com

Santa Maria CA
They are really positive to this, and as a try I have sent over some 8,0mm element, delivery valves & ALDA kit this week.
One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)
dieselmeken
10-09-2013, 05:38 AM #1

As a service to you all in USA, I have made Contact with Larry at http://www.dieselinjectionsystems.com

Santa Maria CA
They are really positive to this, and as a try I have sent over some 8,0mm element, delivery valves & ALDA kit this week.
One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)

mbz123
GT2256V

122
10-09-2013, 08:31 AM #2
It must be christmas morniing and I must be five years old cause I cannot stop giggling.

This ROXXORZ! You ROXXORZ! Sir

MBZ123
mbz123
10-09-2013, 08:31 AM #2

It must be christmas morniing and I must be five years old cause I cannot stop giggling.

This ROXXORZ! You ROXXORZ! Sir

MBZ123

raysorenson
Superturbo

1,162
10-09-2013, 09:12 AM #3
Would they do a 6mm pump?
raysorenson
10-09-2013, 09:12 AM #3

Would they do a 6mm pump?

willbhere4u
Six in a row make her go!

2,507
10-09-2013, 10:02 AM #4
Very cool I need to save up for a super pump for my 300sdl project now!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-09-2013, 10:02 AM #4

Very cool I need to save up for a super pump for my 300sdl project now!


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

scout2000
Naturally-aspirated

3
10-09-2013, 10:05 AM #5
Does this mean I will be able to source a modified M Pump for my turbo OM617 through Larry @ dieselinjectionsystems.com?
scout2000
10-09-2013, 10:05 AM #5

Does this mean I will be able to source a modified M Pump for my turbo OM617 through Larry @ dieselinjectionsystems.com?

Joaquin Suave
K26-2

44
10-09-2013, 10:22 AM #6
The correct Email address is: wedodiesels@comcast.net

Actually both addresses are good. I stopped by there this morning and everybody is really excited about this.
This post was last modified: 10-09-2013, 02:03 PM by Joaquin Suave.
Joaquin Suave
10-09-2013, 10:22 AM #6

The correct Email address is: wedodiesels@comcast.net

Actually both addresses are good. I stopped by there this morning and everybody is really excited about this.

dieselmeken
Holset

407
10-09-2013, 12:50 PM #7
(10-09-2013, 10:05 AM)scout2000 Does this mean I will be able to source a modified M Pump for my turbo OM617 through Larry @ dieselinjectionsystems.com?

If you have a M-pump to send him yes.
dieselmeken
10-09-2013, 12:50 PM #7

(10-09-2013, 10:05 AM)scout2000 Does this mean I will be able to source a modified M Pump for my turbo OM617 through Larry @ dieselinjectionsystems.com?

If you have a M-pump to send him yes.

winmutt
bitbanger

3,468
10-09-2013, 12:51 PM #8
That is great news! I have spares a plenty if anyone needs a core.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
10-09-2013, 12:51 PM #8

That is great news! I have spares a plenty if anyone needs a core.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

DeliveryValve
Superturbo

1,338
10-09-2013, 12:52 PM #9
(10-09-2013, 05:38 AM)dieselmeken As a service to you all in USA, I have made Contact with Larry at http://www.dieselinjectionsystems.com

Santa Maria CA
They are really positive to this, and as a try I have sent over some 8,0mm element, delivery valves & ALDA kit this week.
One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)

Hey that is great news. I was hoping this would happen!
John Kady on staff there is excellent and Larry is a cool owner.

Gota love Mercedes Diesels!



.
DeliveryValve
10-09-2013, 12:52 PM #9

(10-09-2013, 05:38 AM)dieselmeken As a service to you all in USA, I have made Contact with Larry at http://www.dieselinjectionsystems.com

Santa Maria CA
They are really positive to this, and as a try I have sent over some 8,0mm element, delivery valves & ALDA kit this week.
One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)

Hey that is great news. I was hoping this would happen!
John Kady on staff there is excellent and Larry is a cool owner.


Gota love Mercedes Diesels!



.

95e300dez
95E300td

89
10-09-2013, 03:56 PM #10
Dieselmeken has to be one of the best guys to deal with on these pumps. I will say he is quite the stand up person to sell his product to someone here in the states. I have to say thanks for being such a huge help with the m pumps in the US.
95e300dez
10-09-2013, 03:56 PM #10

Dieselmeken has to be one of the best guys to deal with on these pumps. I will say he is quite the stand up person to sell his product to someone here in the states. I have to say thanks for being such a huge help with the m pumps in the US.

1911diesel
GT2256V

108
10-09-2013, 04:46 PM #11
wow! this is great news! your awesome dieselmeken!

82 300SD-this engine may go in the 78...-Mary Jane
78 300CD-may be getting a new engine and rear end...-Brunhilde
82 300CD-uhhh race car project???-Gerda
85 300SD- the womans daily ITS F**KING PINK!-Tsybil
92 F350 CC LB dually-back up/tow pig/long haul land yacht.-Betsey

[Image: PicMonkeyCollage_zpsc1d9cd5f.jpg]
1911diesel
10-09-2013, 04:46 PM #11

wow! this is great news! your awesome dieselmeken!


82 300SD-this engine may go in the 78...-Mary Jane
78 300CD-may be getting a new engine and rear end...-Brunhilde
82 300CD-uhhh race car project???-Gerda
85 300SD- the womans daily ITS F**KING PINK!-Tsybil
92 F350 CC LB dually-back up/tow pig/long haul land yacht.-Betsey

[Image: PicMonkeyCollage_zpsc1d9cd5f.jpg]

bricktron
'77 240D

174
10-10-2013, 11:39 AM #12
exciting! thanks winmutt for the offer, i may take you up on that.


english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




bricktron
10-10-2013, 11:39 AM #12

exciting! thanks winmutt for the offer, i may take you up on that.



english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




sassparilla_kid
diesel > all other fuels

1,618
10-10-2013, 02:21 PM #13
OHMYGODI'MSOEXCITED!!!!!!!

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
10-10-2013, 02:21 PM #13

OHMYGODI'MSOEXCITED!!!!!!!


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

mike-81-240d
more like mike-84-300d now

427
10-10-2013, 02:25 PM #14
And now my 302 v8 swap idea is gone again. I am so freaking excited!

1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 
mike-81-240d
10-10-2013, 02:25 PM #14

And now my 302 v8 swap idea is gone again. I am so freaking excited!


1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 

w123love
Stockish

354
10-10-2013, 07:13 PM #15
IMMMMMMMSOOOOEEEXXXXXCCCCIIIITTTTEEEEEDDDDDDDDDDDDD

if it don’t blow black...take it back.

1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty

The VEGEWGN
w123love
10-10-2013, 07:13 PM #15

IMMMMMMMSOOOOEEEXXXXXCCCCIIIITTTTEEEEEDDDDDDDDDDDDD


if it don’t blow black...take it back.

1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty

The VEGEWGN

dieselmeken
Holset

407
10-11-2013, 01:06 AM #16
(10-09-2013, 03:56 PM)95e300dez Dieselmeken has to be one of the best guys to deal with on these pumps. I will say he is quite the stand up person to sell his product to someone here in the states. I have to say thanks for being such a huge help with the m pumps in the US.

You are all so welcome. My journey here on STD.com, other forums, Facebook etc really shows that a open mind is the way to work as a businessman, dont forget that, this is what I make my living on.
Ofcourse I have some secrets and things I keep for myself, who has not? But overall, Why not share something that you guys want to know? If it was possible I would love to have a workshop GTG with you all so where you could do your own pumps, me just looking. Hopefully you have learned something from me.

I really hope this works out great now with Larry and the guys in Santa Maria.
dieselmeken
10-11-2013, 01:06 AM #16

(10-09-2013, 03:56 PM)95e300dez Dieselmeken has to be one of the best guys to deal with on these pumps. I will say he is quite the stand up person to sell his product to someone here in the states. I have to say thanks for being such a huge help with the m pumps in the US.

You are all so welcome. My journey here on STD.com, other forums, Facebook etc really shows that a open mind is the way to work as a businessman, dont forget that, this is what I make my living on.
Ofcourse I have some secrets and things I keep for myself, who has not? But overall, Why not share something that you guys want to know? If it was possible I would love to have a workshop GTG with you all so where you could do your own pumps, me just looking. Hopefully you have learned something from me.

I really hope this works out great now with Larry and the guys in Santa Maria.

zeeman
Holset

444
10-20-2013, 11:19 PM #17
Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
zeeman
10-20-2013, 11:19 PM #17

Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????

dieselmeken
Holset

407
10-21-2013, 12:25 AM #18
(10-20-2013, 11:19 PM)zeeman Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
I have nothing to do with pricing.
dieselmeken
10-21-2013, 12:25 AM #18

(10-20-2013, 11:19 PM)zeeman Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
I have nothing to do with pricing.

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-21-2013, 07:50 AM #19
"One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)" -dieselmeken

Evidently, they've got little-to-no experience with modifying M pumps. This explains their pricing. "Superpumps" are still going to be out-of-reach for 95% of us no matter where they're built.
It's too bad that someone isn't willing make a name for themselves as being capable AND affordable.
It seemed too good to be true. How about that :-(

P.s. Is Larry even an STD member?

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-21-2013, 07:50 AM #19

"One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)" -dieselmeken

Evidently, they've got little-to-no experience with modifying M pumps. This explains their pricing. "Superpumps" are still going to be out-of-reach for 95% of us no matter where they're built.
It's too bad that someone isn't willing make a name for themselves as being capable AND affordable.
It seemed too good to be true. How about that :-(

P.s. Is Larry even an STD member?


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

zeeman
Holset

444
10-21-2013, 08:21 AM #20
(10-21-2013, 07:50 AM)CRD4x4 "One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)" -dieselmeken

Evidently, they've got little-to-no experience with modifying M pumps. This explains their pricing. "Superpumps" are still going to be out-of-reach for 95% of us no matter where they're built.
It's too bad that someone isn't willing make a name for themselves as being capable AND affordable.
It seemed too good to be true. How about that :-(

P.s. Is Larry even an STD member?

I think Dieselmeken has been doing us right, even with having to ship them to him from the states. always been a standup guy. He specializes in these pumps and has the parts on hand to do them.
I have found that most pump builders in the states are not receptive to building custom pumps.
I did find a small shop in Redding Calif. that has been doing Mercedes pumps since the 50's and is a second generation family shop. One man show but he is great to deal with and is resonable, (doesn't have a large overhead and employes.)
zeeman
10-21-2013, 08:21 AM #20

(10-21-2013, 07:50 AM)CRD4x4 "One pump is going to be build up as a test from their side, if things work ut well we may have a Mercedes superpump builder i USA, How about that :-)" -dieselmeken

Evidently, they've got little-to-no experience with modifying M pumps. This explains their pricing. "Superpumps" are still going to be out-of-reach for 95% of us no matter where they're built.
It's too bad that someone isn't willing make a name for themselves as being capable AND affordable.
It seemed too good to be true. How about that :-(

P.s. Is Larry even an STD member?

I think Dieselmeken has been doing us right, even with having to ship them to him from the states. always been a standup guy. He specializes in these pumps and has the parts on hand to do them.
I have found that most pump builders in the states are not receptive to building custom pumps.
I did find a small shop in Redding Calif. that has been doing Mercedes pumps since the 50's and is a second generation family shop. One man show but he is great to deal with and is resonable, (doesn't have a large overhead and employes.)

Simpler=Better
PORTED HEAD

2,127
10-21-2013, 09:07 AM #21
$$ per horsepower dieselmenken is great, plus his involvement on the forums (you don't see Myna here do you?)

I do understand the want for a US-based pump shop though, sending stuff across the sea can be a pain.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-21-2013, 09:07 AM #21

$$ per horsepower dieselmenken is great, plus his involvement on the forums (you don't see Myna here do you?)

I do understand the want for a US-based pump shop though, sending stuff across the sea can be a pain.


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

MFSuper90
Budget Builder

1,533
10-21-2013, 09:20 AM #22
If you all have ever had a pump fully rebuilt, it's not cheap. The prices I've seen thrown around on STD are extremely reasonable.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
10-21-2013, 09:20 AM #22

If you all have ever had a pump fully rebuilt, it's not cheap. The prices I've seen thrown around on STD are extremely reasonable.


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

gsxr
Gone to the M119 dark side

103
10-21-2013, 12:33 PM #24
(10-20-2013, 11:19 PM)zeeman Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
Is that $1000 including the larger elements? If so, that's pretty reasonable, as there shouldn't be many additional parts required. If that does not include the elements, it's probably cheaper to just ship the pump to Dieselmeken directly. I'd rather have him do it anyway, until the "local" shop has proven they know what they're doing...

Confused

Dave M.
Boise, ID, USA

1997 E420 - 149kmi (Bugeyes)
1994 E420 - 136kmi (Blondie)
1994 E500 - 116kmi (Q-ship)
1992 500E - 179kmi (Mach 5)
1987 300D - 330kmi (Sportline Stage 2)
Click here for my website!
gsxr
10-21-2013, 12:33 PM #24

(10-20-2013, 11:19 PM)zeeman Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
Is that $1000 including the larger elements? If so, that's pretty reasonable, as there shouldn't be many additional parts required. If that does not include the elements, it's probably cheaper to just ship the pump to Dieselmeken directly. I'd rather have him do it anyway, until the "local" shop has proven they know what they're doing...

Confused


Dave M.
Boise, ID, USA

1997 E420 - 149kmi (Bugeyes)
1994 E420 - 136kmi (Blondie)
1994 E500 - 116kmi (Q-ship)
1992 500E - 179kmi (Mach 5)
1987 300D - 330kmi (Sportline Stage 2)
Click here for my website!

Simpler=Better
PORTED HEAD

2,127
10-21-2013, 01:09 PM #25
(10-21-2013, 11:09 AM)dieselmeken Huh

Don't be confused we love you! There's only a few cheapasses who want a $200 pump

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-21-2013, 01:09 PM #25

(10-21-2013, 11:09 AM)dieselmeken Huh

Don't be confused we love you! There's only a few cheapasses who want a $200 pump


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

MFSuper90
Budget Builder

1,533
10-21-2013, 02:22 PM #26
You can't put a price on quality work, and we know Göran does quality work. He is going out of his way to find someone to do pumps in the US and to make all of those videos, I don't think it gets much better than that!

Thanks for all you've done dieselmeken!

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
10-21-2013, 02:22 PM #26

You can't put a price on quality work, and we know Göran does quality work. He is going out of his way to find someone to do pumps in the US and to make all of those videos, I don't think it gets much better than that!

Thanks for all you've done dieselmeken!


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-21-2013, 03:37 PM #27
(10-21-2013, 11:09 AM)dieselmeken Huh

I haven't heard anything but great things of dieselmeken and I think he's helped the interest in MB diesels grow tremendously. He's done great work.

I'm just surprised that there isn't a greater savings here stateside over sending my pumps to Finland.
And I can't help but imagine how valuable all 617/60x would become if high power was easily affordable.
I, for one, am going to keep looking. I'm not going to pay more for my superpump than I did for; 8 of my 10 current cars/trucks or my 606.962 or all 6 of my turbos combined. Huh

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-21-2013, 03:37 PM #27

(10-21-2013, 11:09 AM)dieselmeken Huh

I haven't heard anything but great things of dieselmeken and I think he's helped the interest in MB diesels grow tremendously. He's done great work.

I'm just surprised that there isn't a greater savings here stateside over sending my pumps to Finland.
And I can't help but imagine how valuable all 617/60x would become if high power was easily affordable.
I, for one, am going to keep looking. I'm not going to pay more for my superpump than I did for; 8 of my 10 current cars/trucks or my 606.962 or all 6 of my turbos combined. Huh


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

willbhere4u
Six in a row make her go!

2,507
10-21-2013, 03:46 PM #28
(10-21-2013, 03:37 PM)CRD4x4
(10-21-2013, 11:09 AM)dieselmeken Huh

I haven't heard anything but great things of dieselmeken and I think he's helped the interest in MB diesels grow tremendously. He's done great work.

I'm just surprised that there isn't a greater savings here stateside over sending my pumps to Finland.
And I can't help but imagine how valuable all 617/60x would become if high power was easily affordable.
I, for one, am going to keep looking. I'm not going to pay more for my superpump than I did for; 8 of my 10 current cars/trucks or my 606.962 or all 6 of my turbos combined. Huh


Yea but a turbo is a very simple object with one moving part. A diesel injection pump has several hundred parts that need to be adjusted on very expensive tools that cost several hundred thousand dollars. I bet you could not Evan get a stock injection pump rebuilt for that kind of money! I am saving up right now for my 606 300sdl project Big Grin

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-21-2013, 03:46 PM #28

(10-21-2013, 03:37 PM)CRD4x4
(10-21-2013, 11:09 AM)dieselmeken Huh

I haven't heard anything but great things of dieselmeken and I think he's helped the interest in MB diesels grow tremendously. He's done great work.

I'm just surprised that there isn't a greater savings here stateside over sending my pumps to Finland.
And I can't help but imagine how valuable all 617/60x would become if high power was easily affordable.
I, for one, am going to keep looking. I'm not going to pay more for my superpump than I did for; 8 of my 10 current cars/trucks or my 606.962 or all 6 of my turbos combined. Huh


Yea but a turbo is a very simple object with one moving part. A diesel injection pump has several hundred parts that need to be adjusted on very expensive tools that cost several hundred thousand dollars. I bet you could not Evan get a stock injection pump rebuilt for that kind of money! I am saving up right now for my 606 300sdl project Big Grin


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

zeeman
Holset

444
10-21-2013, 08:56 PM #29
(10-21-2013, 12:33 PM)gsxr
(10-20-2013, 11:19 PM)zeeman Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
Is that $1000 including the larger elements? If so, that's pretty reasonable, as there shouldn't be many additional parts required. If that does not include the elements, it's probably cheaper to just ship the pump to Dieselmeken directly. I'd rather have him do it anyway, until the "local" shop has proven they know what they're doing...

Confused

I think the biggest problem in the states is the availability of the parts, mainly elements. If Dieselmeken can provide the parts the rest is just labor. I spoke to the shop I deal with in Redding and he was receptive to doing the pumps if the parts were available.
He was willing to talk to Dieselmeken. www.fuelinjectioncenter.com
zeeman
10-21-2013, 08:56 PM #29

(10-21-2013, 12:33 PM)gsxr
(10-20-2013, 11:19 PM)zeeman Do we have any pricing yet on doing pumps, I had another member tell me they called and it is around $1000.00 plus parts?????
Is that $1000 including the larger elements? If so, that's pretty reasonable, as there shouldn't be many additional parts required. If that does not include the elements, it's probably cheaper to just ship the pump to Dieselmeken directly. I'd rather have him do it anyway, until the "local" shop has proven they know what they're doing...

Confused

I think the biggest problem in the states is the availability of the parts, mainly elements. If Dieselmeken can provide the parts the rest is just labor. I spoke to the shop I deal with in Redding and he was receptive to doing the pumps if the parts were available.
He was willing to talk to Dieselmeken. www.fuelinjectioncenter.com

mike-81-240d
more like mike-84-300d now

427
10-22-2013, 12:41 PM #30
So what is Larry charging? I tried to call the shop but they didn't pick up.

1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 
mike-81-240d
10-22-2013, 12:41 PM #30

So what is Larry charging? I tried to call the shop but they didn't pick up.


1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-22-2013, 02:11 PM #31
(10-22-2013, 12:41 PM)mike-81-240d So what is Larry charging? I tried to call the shop but they didn't pick up.

Rumor has it the cost is "$1000 plus parts".

Anyone else got through to Larry?

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-22-2013, 02:11 PM #31

(10-22-2013, 12:41 PM)mike-81-240d So what is Larry charging? I tried to call the shop but they didn't pick up.

Rumor has it the cost is "$1000 plus parts".

Anyone else got through to Larry?


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

Joaquin Suave
K26-2

44
10-23-2013, 10:14 AM #32
Quote:mike-81-240d Wrote:
So what is Larry charging? I tried to call the shop but they didn't pick up.

Rumor has it the cost is "$1000 plus parts".

Anyone else got through to Larry?

Chances are that their phones were all tied up. I've had the same situation calling them before. They are a REALLY busy shop!

I was over at the shop last friday and saw all the cool bits and pieces from Deiselmeken.
Joaquin Suave
10-23-2013, 10:14 AM #32

Quote:mike-81-240d Wrote:
So what is Larry charging? I tried to call the shop but they didn't pick up.

Rumor has it the cost is "$1000 plus parts".

Anyone else got through to Larry?

Chances are that their phones were all tied up. I've had the same situation calling them before. They are a REALLY busy shop!

I was over at the shop last friday and saw all the cool bits and pieces from Deiselmeken.

zeeman
Holset

444
10-23-2013, 11:47 AM #33
(10-23-2013, 10:14 AM)Joaquin Suave
Quote:mike-81-240d Wrote:
So what is Larry charging? I tried to call the shop but they didn't pick up.

Rumor has it the cost is "$1000 plus parts".

Anyone else got through to Larry?

Chances are that their phones were all tied up. I've had the same situation calling them before. They are a REALLY busy shop!

I was over at the shop last friday and saw all the cool bits and pieces from Deiselmeken.

I prefer to deal with a shop that answers thier phone and specializes in Mercedes pumps. Large shops are usually big overhead and charge accordingly.
Dieselmeken is still going to have to ship the parts to whoever is doing the pumps and we are still going to have to ship the pumps to whoever is going to do the pumps. I prefer to stay with an experienced shop I can trust even if it is overseas.
Dieselmeken has been doing these for some time, and as he states he has some tricks of the trade that he is keeping to himself and rightly so.
zeeman
10-23-2013, 11:47 AM #33

(10-23-2013, 10:14 AM)Joaquin Suave
Quote:mike-81-240d Wrote:
So what is Larry charging? I tried to call the shop but they didn't pick up.

Rumor has it the cost is "$1000 plus parts".

Anyone else got through to Larry?

Chances are that their phones were all tied up. I've had the same situation calling them before. They are a REALLY busy shop!

I was over at the shop last friday and saw all the cool bits and pieces from Deiselmeken.

I prefer to deal with a shop that answers thier phone and specializes in Mercedes pumps. Large shops are usually big overhead and charge accordingly.
Dieselmeken is still going to have to ship the parts to whoever is doing the pumps and we are still going to have to ship the pumps to whoever is going to do the pumps. I prefer to stay with an experienced shop I can trust even if it is overseas.
Dieselmeken has been doing these for some time, and as he states he has some tricks of the trade that he is keeping to himself and rightly so.

DeliveryValve
Superturbo

1,338
10-23-2013, 07:52 PM #34
I talked to John Kady, he told me the initial M pumps are going to be around $1,400 to do. Includes Dieselmeken Plungers and Barrels , new DV's and gaskets. Other hard parts extra. But once they get rolling, they would like to get the price down lower couple hundred of dollars.



.
This post was last modified: 10-23-2013, 07:56 PM by DeliveryValve.

Gota love Mercedes Diesels!



.
DeliveryValve
10-23-2013, 07:52 PM #34

I talked to John Kady, he told me the initial M pumps are going to be around $1,400 to do. Includes Dieselmeken Plungers and Barrels , new DV's and gaskets. Other hard parts extra. But once they get rolling, they would like to get the price down lower couple hundred of dollars.



.


Gota love Mercedes Diesels!



.

Simpler=Better
PORTED HEAD

2,127
10-23-2013, 09:42 PM #35
$1400 to double your horsepower isn't bad at all

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-23-2013, 09:42 PM #35

$1400 to double your horsepower isn't bad at all


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

dieselmeken
Holset

407
10-24-2013, 10:15 AM #36
(10-23-2013, 09:42 PM)Simpler=Better $1400 to double your horsepower isn't bad at all

Or triple, 177x3 =531 :-)
Well, atleast I have given it a shot. Time will tell if this works out.
Its my wish anyway and I Think they sort it out.
If not, I take a vacation week in CA, liked it there this summer and are willing to go back as a business journey.
dieselmeken
10-24-2013, 10:15 AM #36

(10-23-2013, 09:42 PM)Simpler=Better $1400 to double your horsepower isn't bad at all

Or triple, 177x3 =531 :-)
Well, atleast I have given it a shot. Time will tell if this works out.
Its my wish anyway and I Think they sort it out.
If not, I take a vacation week in CA, liked it there this summer and are willing to go back as a business journey.

Triker
Naturally-aspirated

21
10-24-2013, 03:57 PM #37
I have Dieselmeken's pump and I live in Finland. Some says that I should buy IP from here but I got very very good 8mm pump from Göran and he knows what he does and what a customer service means! I hope you keep this line in the future also and you get so much customers from here Finland also. Smile

S210 320CDI
W140 S300DT
EX: C126 om606 compound "300STC
Triker
10-24-2013, 03:57 PM #37

I have Dieselmeken's pump and I live in Finland. Some says that I should buy IP from here but I got very very good 8mm pump from Göran and he knows what he does and what a customer service means! I hope you keep this line in the future also and you get so much customers from here Finland also. Smile


S210 320CDI
W140 S300DT
EX: C126 om606 compound "300STC

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-24-2013, 09:42 PM #38
(10-24-2013, 10:15 AM)dieselmeken
(10-23-2013, 09:42 PM)Simpler=Better $1400 to double your horsepower isn't bad at all

Or triple, 177x3 =531 :-)

You can build a pump that produces 531hp for $1,400?!

What's you're mailing address?

'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project
CRD4x4
10-24-2013, 09:42 PM #38

(10-24-2013, 10:15 AM)dieselmeken
(10-23-2013, 09:42 PM)Simpler=Better $1400 to double your horsepower isn't bad at all

Or triple, 177x3 =531 :-)

You can build a pump that produces 531hp for $1,400?!

What's you're mailing address?


'05 Jeep Liberty CRD - 160k
'06.5 VW Jetta TDI - 230k
'82 MB 300TD - 116k (motor going to raysorenson)
'81 MB 300TD - 195k (parting out)
'71 Jeep DJ5 - diesel conversion project

dieselmeken
Holset

407
10-25-2013, 12:33 AM #39
(10-24-2013, 09:42 PM)CRD4x4
(10-24-2013, 10:15 AM)dieselmeken
(10-23-2013, 09:42 PM)Simpler=Better $1400 to double your horsepower isn't bad at all

Or triple, 177x3 =531 :-)

You can build a pump that produces 531hp for $1,400?!

What's you're mailing address?

Yes I can, question is if you can build a Engine that can eat 180cc of fuel without blowing to pieces?
dieselmeken@telia.com
dieselmeken
10-25-2013, 12:33 AM #39

(10-24-2013, 09:42 PM)CRD4x4
(10-24-2013, 10:15 AM)dieselmeken
(10-23-2013, 09:42 PM)Simpler=Better $1400 to double your horsepower isn't bad at all

Or triple, 177x3 =531 :-)

You can build a pump that produces 531hp for $1,400?!

What's you're mailing address?

Yes I can, question is if you can build a Engine that can eat 180cc of fuel without blowing to pieces?
dieselmeken@telia.com

Simpler=Better
PORTED HEAD

2,127
10-25-2013, 09:44 AM #40
Going to need rods and a girdle at that level, maybe a new crank

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
10-25-2013, 09:44 AM #40

Going to need rods and a girdle at that level, maybe a new crank


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

gsxr
Gone to the M119 dark side

103
10-25-2013, 11:17 AM #41
(10-25-2013, 12:33 AM)dieselmeken
(10-24-2013, 09:42 PM)CRD4x4 You can build a pump that produces 531hp for $1,400?!

Yes I can, question is if you can build a Engine that can eat 180cc of fuel without blowing to pieces?
LOL! He's right. Supplying the fuel is the "easy" part. Engineering the rest of the engine (especially the turbocharger, IC, intake, exhaust) is the hard part. Then you need to pray the rods, pistons, and crank all stay where they belong and don't poke holes in the crankcase.

For a street car I'd much rather have 275-300hp that is completely reliable. I'd try 500hp for a toy/race car if I had access to cheap spare engines to swap in as they blew up.

Cool

Dave M.
Boise, ID, USA

1997 E420 - 149kmi (Bugeyes)
1994 E420 - 136kmi (Blondie)
1994 E500 - 116kmi (Q-ship)
1992 500E - 179kmi (Mach 5)
1987 300D - 330kmi (Sportline Stage 2)
Click here for my website!
gsxr
10-25-2013, 11:17 AM #41

(10-25-2013, 12:33 AM)dieselmeken
(10-24-2013, 09:42 PM)CRD4x4 You can build a pump that produces 531hp for $1,400?!

Yes I can, question is if you can build a Engine that can eat 180cc of fuel without blowing to pieces?
LOL! He's right. Supplying the fuel is the "easy" part. Engineering the rest of the engine (especially the turbocharger, IC, intake, exhaust) is the hard part. Then you need to pray the rods, pistons, and crank all stay where they belong and don't poke holes in the crankcase.

For a street car I'd much rather have 275-300hp that is completely reliable. I'd try 500hp for a toy/race car if I had access to cheap spare engines to swap in as they blew up.

Cool


Dave M.
Boise, ID, USA

1997 E420 - 149kmi (Bugeyes)
1994 E420 - 136kmi (Blondie)
1994 E500 - 116kmi (Q-ship)
1992 500E - 179kmi (Mach 5)
1987 300D - 330kmi (Sportline Stage 2)
Click here for my website!

Jetmugg
GT2256V

125
10-29-2013, 10:18 AM #42
Goran (sorry, don't know how to do the umlatte symbol), is a true stand-up guy who has proven his ability and willingness to provide an extremely valuable service. Kudos to the man.

Steve.
Jetmugg
10-29-2013, 10:18 AM #42

Goran (sorry, don't know how to do the umlatte symbol), is a true stand-up guy who has proven his ability and willingness to provide an extremely valuable service. Kudos to the man.

Steve.

vica153
GT2256V

105
10-30-2013, 05:39 PM #43
I have a 603 pump in the garage waiting to get rebuilt and put on my 606. Does this place in California have the same equipment to properly test the pumps?

Are they only doing 8mm pumps for now? That seems like it might be overkill for my purposes. ~250-300HP.

I could send my pump down to them anytime. Although I don't like the idea of paying extra to be their first pump if the next pumps will cost less.
This post was last modified: 11-05-2013, 01:47 PM by vica153.
vica153
10-30-2013, 05:39 PM #43

I have a 603 pump in the garage waiting to get rebuilt and put on my 606. Does this place in California have the same equipment to properly test the pumps?

Are they only doing 8mm pumps for now? That seems like it might be overkill for my purposes. ~250-300HP.

I could send my pump down to them anytime. Although I don't like the idea of paying extra to be their first pump if the next pumps will cost less.

willbhere4u
Six in a row make her go!

2,507
10-31-2013, 10:12 AM #44
You can always dial it down to what ever power level you are comfortable with and then you know it can be turned up later if you want or need more power

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-31-2013, 10:12 AM #44

You can always dial it down to what ever power level you are comfortable with and then you know it can be turned up later if you want or need more power


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

vica153
GT2256V

105
10-31-2013, 04:20 PM #45
That is true, so whats the status of their first test pump? I could ship my 603 pump anytime.

Getting cheaper once they start doing more of them makes sense, but it would also make sense to give the first few people a deal for being the test subjects for their new project.
vica153
10-31-2013, 04:20 PM #45

That is true, so whats the status of their first test pump? I could ship my 603 pump anytime.

Getting cheaper once they start doing more of them makes sense, but it would also make sense to give the first few people a deal for being the test subjects for their new project.

Bangaway
606 Turbo > Porsche Turbo

129
10-31-2013, 08:28 PM #46
I have a 606 pump and engine from a 95 for sale. But you also have to buy the rest of the car with it. Look in the FS section. It's a beauty.

http://denver.craigslist.org/cto/4137545254.html
This post was last modified: 10-31-2013, 08:29 PM by Bangaway.
Bangaway
10-31-2013, 08:28 PM #46

I have a 606 pump and engine from a 95 for sale. But you also have to buy the rest of the car with it. Look in the FS section. It's a beauty.

http://denver.craigslist.org/cto/4137545254.html

mikes02ls1
Naturally-aspirated

15
11-01-2013, 09:22 PM #47
Sweet, so is going to be the test mule and get theirs done stateside?
mikes02ls1
11-01-2013, 09:22 PM #47

Sweet, so is going to be the test mule and get theirs done stateside?

MFSuper90
Budget Builder

1,533
11-01-2013, 09:48 PM #48
I would go with the big elements and just dial it down some, bigger elements = quicker injection time, quicker injection= more powaa!
And it'll last forever cause your not pushing it's limits

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
11-01-2013, 09:48 PM #48

I would go with the big elements and just dial it down some, bigger elements = quicker injection time, quicker injection= more powaa!
And it'll last forever cause your not pushing it's limits


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

dieselmeken
Holset

407
11-02-2013, 02:43 AM #49
(11-01-2013, 09:22 PM)mikes02ls1 Sweet, so is going to be the test mule and get theirs done stateside?

Testmule, well if anyone is a testmule its me, I dont know how many different elements, setups , hours I have spent on these pumps, but now finally I have some setups that works really good. We are all children in the beginning.
dieselmeken
11-02-2013, 02:43 AM #49

(11-01-2013, 09:22 PM)mikes02ls1 Sweet, so is going to be the test mule and get theirs done stateside?

Testmule, well if anyone is a testmule its me, I dont know how many different elements, setups , hours I have spent on these pumps, but now finally I have some setups that works really good. We are all children in the beginning.

vica153
GT2256V

105
11-03-2013, 03:28 AM #50
He meant,"Who is going to be the first person to send their pump to DieselInjectionSystems in California to see if they can do a good job with the Dieselmeken parts?"
This post was last modified: 11-04-2013, 02:14 PM by vica153.
vica153
11-03-2013, 03:28 AM #50

He meant,"Who is going to be the first person to send their pump to DieselInjectionSystems in California to see if they can do a good job with the Dieselmeken parts?"

Pages (3): 1 2 3 Next
 
  • 3 Vote(s) - 4.33 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)