OM60x to GM Manual Trans adapter?
OM60x to GM Manual Trans adapter?
09-20-2013, 09:39 PM
#25
(09-20-2013, 07:28 PM)Jetmugg Thanks for doing all the homework, Zeeman. Do you think any of those 8-bolt options would work well on an adapter?
Steve.
I am looking at the Mustang 4.6 DOHC flywheel on E-bay. #350441190903 it is an 8 bolt. It takes a 10 1/2"or 11" clutch. I am just not keen on redrilling a flywheel, or two sets of bolt holes. I think having a flywheel made with the correct pattern and bolting the whole thing together with the original crankshaft bolt pattern is the way to go. Especially if you pulling some HP. I can get the flywheel I use made for $275.00 not including the adapter. By the time you get another flywheel and have it redrilled you almost at the same cost.
Zeeman
This post was last modified: 09-21-2013, 12:24 AM by zeeman.
(09-20-2013, 07:28 PM)Jetmugg Thanks for doing all the homework, Zeeman. Do you think any of those 8-bolt options would work well on an adapter?
Steve.
I am looking at the Mustang 4.6 DOHC flywheel on E-bay. #350441190903 it is an 8 bolt. It takes a 10 1/2"or 11" clutch. I am just not keen on redrilling a flywheel, or two sets of bolt holes. I think having a flywheel made with the correct pattern and bolting the whole thing together with the original crankshaft bolt pattern is the way to go. Especially if you pulling some HP. I can get the flywheel I use made for $275.00 not including the adapter. By the time you get another flywheel and have it redrilled you almost at the same cost.
Zeeman
Messages In This Thread
OM60x to GM Manual Trans adapter? - by Jetmugg - 09-16-2013, 09:39 AM
RE: OM60x to GM Manual Trans adapter? - by waz - 09-16-2013, 09:53 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-16-2013, 09:59 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-16-2013, 02:58 PM
RE: OM60x to GM Manual Trans adapter? - by waz - 09-17-2013, 09:46 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-17-2013, 10:20 AM
RE: OM60x to GM Manual Trans adapter? - by Mark_M - 09-18-2013, 04:14 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 10:04 AM
RE: OM60x to GM Manual Trans adapter? - by tjts1 - 09-18-2013, 11:19 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 11:51 AM
RE: OM60x to GM Manual Trans adapter? - by tjts1 - 09-18-2013, 12:28 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 03:26 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-18-2013, 05:14 PM
RE: OM60x to GM Manual Trans adapter? - by Mark_M - 09-18-2013, 05:15 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 05:51 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-18-2013, 07:26 PM
RE: OM60x to GM Manual Trans adapter? - by Mark_M - 09-18-2013, 06:17 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-19-2013, 11:20 AM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-19-2013, 01:24 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-19-2013, 03:01 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-19-2013, 03:48 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-20-2013, 01:42 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-20-2013, 03:30 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-20-2013, 07:28 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-20-2013, 09:39 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-22-2013, 07:57 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-22-2013, 09:45 PM
RE: OM60x to GM Manual Trans adapter? - by Simpler=Better - 09-24-2014, 10:10 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)