OM60x to GM Manual Trans adapter?
OM60x to GM Manual Trans adapter?
09-17-2013, 10:20 AM
#6
So far, no luck on finding such a drawing. I know I could use an existing transmission and a transfer punch to capture the hole locations. The input shaft centerline would be more challenging.
Finding a properly dimensioned drawing would be preferable, however. That information could go right into the CNC mill, laser table, or water jet.
If I could come up with a mechanical drawing of the MB transmission bolt pattern and shaft centerline, I think I could make/have one made for less than the $925 asking price.
So far, no luck on finding such a drawing. I know I could use an existing transmission and a transfer punch to capture the hole locations. The input shaft centerline would be more challenging.
Finding a properly dimensioned drawing would be preferable, however. That information could go right into the CNC mill, laser table, or water jet.
Messages In This Thread
OM60x to GM Manual Trans adapter? - by Jetmugg - 09-16-2013, 09:39 AM
RE: OM60x to GM Manual Trans adapter? - by waz - 09-16-2013, 09:53 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-16-2013, 09:59 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-16-2013, 02:58 PM
RE: OM60x to GM Manual Trans adapter? - by waz - 09-17-2013, 09:46 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-17-2013, 10:20 AM
RE: OM60x to GM Manual Trans adapter? - by Mark_M - 09-18-2013, 04:14 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 10:04 AM
RE: OM60x to GM Manual Trans adapter? - by tjts1 - 09-18-2013, 11:19 AM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 11:51 AM
RE: OM60x to GM Manual Trans adapter? - by tjts1 - 09-18-2013, 12:28 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 03:26 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-18-2013, 05:14 PM
RE: OM60x to GM Manual Trans adapter? - by Mark_M - 09-18-2013, 05:15 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-18-2013, 05:51 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-18-2013, 07:26 PM
RE: OM60x to GM Manual Trans adapter? - by Mark_M - 09-18-2013, 06:17 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-19-2013, 11:20 AM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-19-2013, 01:24 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-19-2013, 03:01 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-19-2013, 03:48 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-20-2013, 01:42 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-20-2013, 03:30 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-20-2013, 07:28 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-20-2013, 09:39 PM
RE: OM60x to GM Manual Trans adapter? - by Jetmugg - 09-22-2013, 07:57 PM
RE: OM60x to GM Manual Trans adapter? - by zeeman - 09-22-2013, 09:45 PM
RE: OM60x to GM Manual Trans adapter? - by Simpler=Better - 09-24-2014, 10:10 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)