OM602 project
OM602 project
08-20-2013, 08:12 PM
#7
(08-16-2013, 11:45 AM)Blip Thanks very much for the info. After lots of reading i'm starting to get a better picture of what I need
The 2.5 turbo's had transmissions with an extra plate in each clutch pack, I presume to handle the extra torque. I don't know if you can simply add a plate to a normal 722.4. The part numbers that I know are:
722.413 (190DT)
722.418 (300D 2.5)
You're also going to need a bowden cable link.
This post was last modified: 08-20-2013, 08:14 PM by mxfrank.
1987 Mercedes 190TD
(08-16-2013, 11:45 AM)Blip Thanks very much for the info. After lots of reading i'm starting to get a better picture of what I need
The 2.5 turbo's had transmissions with an extra plate in each clutch pack, I presume to handle the extra torque. I don't know if you can simply add a plate to a normal 722.4. The part numbers that I know are:
722.413 (190DT)
722.418 (300D 2.5)
You're also going to need a bowden cable link.
1987 Mercedes 190TD
Messages In This Thread
OM602 project - by Blip - 08-13-2013, 06:11 AM
RE: OM602 project - by hooblah - 08-13-2013, 08:33 AM
RE: OM602 project - by Blip - 08-13-2013, 01:46 PM
RE: OM602 project - by Blip - 08-13-2013, 03:44 PM
RE: OM602 project - by aaa - 08-14-2013, 08:30 AM
RE: OM602 project - by Blip - 08-16-2013, 11:45 AM
RE: OM602 project - by mxfrank - 08-20-2013, 08:12 PM
RE: OM602 project - by Duncansport - 08-21-2013, 08:10 AM
RE: OM602 project - by mxfrank - 08-21-2013, 10:15 AM
RE: OM602 project - by pmj4147 - 09-03-2013, 04:17 PM
RE: OM602 project - by Blip - 09-05-2013, 04:08 AM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)