OM616 4cyl Diesel engine parts from 83 240d
OM616 4cyl Diesel engine parts from 83 240d
08-04-2013, 02:30 AM
#1
Complete head -$300
Intake/exhaust manifolds, $30 each or $50 for both
Injection pump, $300
Injectors $40 for all 4
Injector hard lines $40 for all 4
And any other engine parts I may have missed.
Only selling off the motor! Keeping everything else for my om617 swap
All parts located in Sonora, ca, about 2.5 hrs east of SAn Francisco. Willing to ship and willing to trade for om617 parts, turbos, supercharges, aftermarket wheels and tires for the 240d, interior parts for the 240d, my dash is cracked and my center console near the shifter boot is jacked
Motor ran excellent, up until it threw a rod! So I'm sellin off parts of the engine. Tell me if my prices are fair or if I'm out of my mind! Engine has 275k on it.
Complete head -$300
Intake/exhaust manifolds, $30 each or $50 for both
Injection pump, $300
Injectors $40 for all 4
Injector hard lines $40 for all 4
And any other engine parts I may have missed.
Only selling off the motor! Keeping everything else for my om617 swap
All parts located in Sonora, ca, about 2.5 hrs east of SAn Francisco. Willing to ship and willing to trade for om617 parts, turbos, supercharges, aftermarket wheels and tires for the 240d, interior parts for the 240d, my dash is cracked and my center console near the shifter boot is jacked
08-05-2013, 11:13 AM
#3
" straighten up that star on the grill, assholes."
lgreeley83
08-05-2013, 11:13 AM #3I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
" straighten up that star on the grill, assholes."
08-05-2013, 12:21 PM
#4
(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
(08-05-2013, 11:13 AM)lgreeley83 I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
okay ill check it out, only place i could find anything was on ebay, and they were about $350. and junkyards you cant make sure it works before you buy it. so im open to any offers really
This post was last modified: 08-05-2013, 12:21 PM by jenyus.
(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
(08-05-2013, 11:13 AM)lgreeley83 I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
okay ill check it out, only place i could find anything was on ebay, and they were about $350. and junkyards you cant make sure it works before you buy it. so im open to any offers really
08-05-2013, 12:28 PM
#5
(08-05-2013, 12:21 PM)jenyus(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
(08-05-2013, 11:13 AM)lgreeley83 I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
okay ill check it out, only place i could find anything was on ebay, and they were about $350. and junkyards you cant make sure it works before you buy it. so im open to any offers really
I've seen pumps going for around $150-$200 in "ran when removed" condition. Eb*y can usually fetch a higher price though
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
08-05-2013, 12:28 PM #5(08-05-2013, 12:21 PM)jenyus(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
(08-05-2013, 11:13 AM)lgreeley83 I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
okay ill check it out, only place i could find anything was on ebay, and they were about $350. and junkyards you cant make sure it works before you buy it. so im open to any offers really
I've seen pumps going for around $150-$200 in "ran when removed" condition. Eb*y can usually fetch a higher price though
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
08-05-2013, 01:06 PM
#6
(08-05-2013, 12:21 PM)jenyus(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
It is the big gear thing behind the vacuum pump that the IP plugs into. There are springs and weights inside it, and it advances the timing as engine speed increases.
08-05-2013, 01:27 PM
#7
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
08-05-2013, 01:27 PM #7If no one else wants the vac pump I'll take it to cut up & make a blockoff plate
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
08-05-2013, 01:29 PM
#8
(08-05-2013, 12:28 PM)Simpler=Better(08-05-2013, 12:21 PM)jenyus(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
(08-05-2013, 11:13 AM)lgreeley83 I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
okay ill check it out, only place i could find anything was on ebay, and they were about $350. and junkyards you cant make sure it works before you buy it. so im open to any offers really
I've seen pumps going for around $150-$200 in "ran when removed" condition. Eb*y can usually fetch a higher price though
Yeah I should have gone further. I wouldn't expect to pay 30$ to someone who has done the work and it is known that the pump is good. That would get some more money. There an IP being sold on the local Craig and the guy want 450$ but makes no reference to it be pulled from a running motor. Also selling an old turbo high miles not rebuilt for something similar. Maybe someone will get desperate.
Someone would probably pay 300$ but you might have to wait awhile for that someone. In all actuality what a pump might cost from a mechanic or from Mercedes it is probably a good deal.1
" straighten up that star on the grill, assholes."
lgreeley83
08-05-2013, 01:29 PM #8(08-05-2013, 12:28 PM)Simpler=Better(08-05-2013, 12:21 PM)jenyus(08-05-2013, 10:42 AM)OM616 I'd be interested in the advance mechanism assembly.
what is that?
(08-05-2013, 11:13 AM)lgreeley83 I'd look up junkyard cost on that injection pump. I know I can get them for 30$ at my yard.
okay ill check it out, only place i could find anything was on ebay, and they were about $350. and junkyards you cant make sure it works before you buy it. so im open to any offers really
I've seen pumps going for around $150-$200 in "ran when removed" condition. Eb*y can usually fetch a higher price though
Yeah I should have gone further. I wouldn't expect to pay 30$ to someone who has done the work and it is known that the pump is good. That would get some more money. There an IP being sold on the local Craig and the guy want 450$ but makes no reference to it be pulled from a running motor. Also selling an old turbo high miles not rebuilt for something similar. Maybe someone will get desperate.
Someone would probably pay 300$ but you might have to wait awhile for that someone. In all actuality what a pump might cost from a mechanic or from Mercedes it is probably a good deal.1
" straighten up that star on the grill, assholes."
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)