STD Tuning Body Mods +35mm

+35mm

+35mm

 
  • 0 Vote(s) - 0 Average
 
83300d
GTA2056V

78
07-21-2013, 12:09 PM #1
Not liking the look of my current rims I have been looking at Kijiji - dangerous I know - and found a set of 17X8 +35mm. As it is Sunday morning and I have yet to devour enough coffee to jump start the brain I cant remember if I will need spacers for my W123.

Believe someone was running +37 so shouldnt have fitment issues, but once again the brain shes a little groggy right now.

thanks
83300d
07-21-2013, 12:09 PM #1

Not liking the look of my current rims I have been looking at Kijiji - dangerous I know - and found a set of 17X8 +35mm. As it is Sunday morning and I have yet to devour enough coffee to jump start the brain I cant remember if I will need spacers for my W123.

Believe someone was running +37 so shouldnt have fitment issues, but once again the brain shes a little groggy right now.

thanks

swampmonkey
hx40 super

280
07-26-2013, 09:15 PM #2
runs ET35 17" rims on my w123 without problem, they are tight at the front, keep the weights for balance glued on the inside and not hammered on the outside (at the inside)

16" et35 didint work, but the slightly wider 17" did.

---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
swampmonkey
07-26-2013, 09:15 PM #2

runs ET35 17" rims on my w123 without problem, they are tight at the front, keep the weights for balance glued on the inside and not hammered on the outside (at the inside)

16" et35 didint work, but the slightly wider 17" did.


---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com

83300d
GTA2056V

78
07-28-2013, 10:19 AM #3
Thanks swamp - will buy them now that I know they will fit. Wink
83300d
07-28-2013, 10:19 AM #3

Thanks swamp - will buy them now that I know they will fit. Wink

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)