Will these fit okay?
Will these fit okay?
I would like to put something more sporty, and larger.
Does anyone know if these will be okay? Fitment? Rubbing etc??
http://inlandempire.craigslist.org/pts/3815746060.html
Any help I would appreciate!!
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
I just bought a 1987 300D w124 chassis, and it has ugly 15inch chrome rims, that I am not a fan of.
I would like to put something more sporty, and larger.
Does anyone know if these will be okay? Fitment? Rubbing etc??
http://inlandempire.craigslist.org/pts/3815746060.html
Any help I would appreciate!!
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
Should fit with a bit smaller tires and some fender rolling. I have 18 x 9.5" ET25 front and 18 x 10.5" ET17 on my W210. Front sits nicely flush and rear is 1" over fender without rolling. 225/40 and 255/35. Had 245/40 and 275/35 originally but could not lower the car with those tires.
Installing tomorrow Bilstein B12 suspension with #1 spring pads. We'll see how much rolling is required to get enough clearance.
Find out what the offset of those wheels are. I would guess by judging the tire size 25-30 front and 22-25 rear.
Should fit with a bit smaller tires and some fender rolling. I have 18 x 9.5" ET25 front and 18 x 10.5" ET17 on my W210. Front sits nicely flush and rear is 1" over fender without rolling. 225/40 and 255/35. Had 245/40 and 275/35 originally but could not lower the car with those tires.
Installing tomorrow Bilstein B12 suspension with #1 spring pads. We'll see how much rolling is required to get enough clearance.
These look very similar to the ones I am going to use on my w124 (mine are 17" and not AMG). The bolt pattern is the same, but on the ones I have, they are intended for a 14mm bolt pattern, same BCD.
So to use them on my w124 ('87 300D), I bought some conversion lug bolts that are 12x1.5 (or whatever the stock thread pitch is, maybe 1.0), but have a 14mm ball seat on the bolt head. Ill post a link to the bolts later, but they were aroud $50 plus shipping from the L.A. area...
Find out what chassis they were intended for, mine came from a 210, IIRC
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
SurfRodder
06-17-2013, 03:11 PM #4just for future reference when the link is dead, here's a pic from the ad:
These look very similar to the ones I am going to use on my w124 (mine are 17" and not AMG). The bolt pattern is the same, but on the ones I have, they are intended for a 14mm bolt pattern, same BCD.
So to use them on my w124 ('87 300D), I bought some conversion lug bolts that are 12x1.5 (or whatever the stock thread pitch is, maybe 1.0), but have a 14mm ball seat on the bolt head. Ill post a link to the bolts later, but they were aroud $50 plus shipping from the L.A. area...
Find out what chassis they were intended for, mine came from a 210, IIRC
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
1 Guest(s)
1 Guest(s)