5x112 Slotted Rotors EBC CARBONS
5x112 Slotted Rotors EBC CARBONS
I really need to sell these to pay for a few things on my project,
I have a set of front rotors that were purchased for a Mercedes SLK year 1998
I decided to not put the money into it and I want to sell these rotors
The lug pattern is 5x112 so they can be used on other Mercedes and other cars like BMWs, Vettes or VWs and would be a good brake upgrade
the hub bore i believe is 66.5
I will ship at buyers Expense and I will use USPS Flat Rate to keep the cost down to a minimum if Shipping is needed.
BREMBOS ARE SOLD TO winmutt
_______________________________________________________
Next up are a set of EBC Carbon Rotors
These are brand new in box only one was opened to view.
Im asking to get 130$ shipped!!!! for these.
They are 300+ online and these have never been used. Im taking a hit on these.
![[Image: IMAG1329.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1329.jpg)
![[Image: IMAG1330.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1330.jpg)
Thanks for looking!
You can reach me on my cell at 407 463 5380 or just PM me
Here are some pics of measurements for the rotors....
![[Image: IMAG1595_zps7ae25df2.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1595_zps7ae25df2.jpg)
![[Image: IMAG1597_zps40fab2a5.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1597_zps40fab2a5.jpg)
![[Image: IMAG1600_zpsa17ed101.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1600_zpsa17ed101.jpg)
![[Image: IMAG1599_zps599dcd0c.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1599_zps599dcd0c.jpg)
![[Image: IMAG1602_zpsad64dbba.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1602_zpsad64dbba.jpg)
![[Image: IMAG1604_zpsb0598b4d.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1604_zpsb0598b4d.jpg)
![[Image: IMAG1605_zpsc44dc17d.jpg]](http://i790.photobucket.com/albums/yy188/cchondro/IMAG1605_zpsc44dc17d.jpg)
sorry for some of the pictures being upside down.
I don't understand why they rotated after uploading.
First off I would like to say I'm new to this forum but have many vouchers on HondaSociety and zilvia.net as well as benzworld. So with that being said,
I really need to sell these to pay for a few things on my project,
I have a set of front rotors that were purchased for a Mercedes SLK year 1998
I decided to not put the money into it and I want to sell these rotors
The lug pattern is 5x112 so they can be used on other Mercedes and other cars like BMWs, Vettes or VWs and would be a good brake upgrade
the hub bore i believe is 66.5
I will ship at buyers Expense and I will use USPS Flat Rate to keep the cost down to a minimum if Shipping is needed.
BREMBOS ARE SOLD TO winmutt
_______________________________________________________
Next up are a set of EBC Carbon Rotors
These are brand new in box only one was opened to view.
Im asking to get 130$ shipped!!!! for these.
They are 300+ online and these have never been used. Im taking a hit on these.
Thanks for looking!
You can reach me on my cell at 407 463 5380 or just PM me
Here are some pics of measurements for the rotors....
sorry for some of the pictures being upside down.
I don't understand why they rotated after uploading.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
05-02-2013, 08:12 AM #3If these fit my truck I'd be on them like stink on rice
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
(05-02-2013, 09:04 AM)cchondro(05-02-2013, 08:12 AM)Simpler=Better If these fit my truck I'd be on them like stink on rice
What are your rotor sizes. As long as the hub bore is the same you can make them work with caliper adapters.
The rotor and hub are one piece on my truck. One of the few design flaws it ans and it pisses me off.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
05-03-2013, 08:24 AM #5(05-02-2013, 09:04 AM)cchondro(05-02-2013, 08:12 AM)Simpler=Better If these fit my truck I'd be on them like stink on rice
What are your rotor sizes. As long as the hub bore is the same you can make them work with caliper adapters.
The rotor and hub are one piece on my truck. One of the few design flaws it ans and it pisses me off.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
05-22-2013, 07:18 AM #8Put those badboys on Eb8y they should sell pretty darn quick
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
1 Guest(s)
1 Guest(s)