STD Tuning Engine om606 engine weight

om606 engine weight

om606 engine weight

 
  • 0 Vote(s) - 0 Average
 
dirtydiesel
Naturally-aspirated

5
04-27-2013, 05:40 PM #1
I searched and couldn't find a definative weight, so when i pulled mine this wekend i weighed it.

It is a 606.692, fully dressed with every ancilliary full of oil, weighed 245kg

[Image: 2013-04-25_22-21-31_927_zps97d1f09e.jpg]

[Image: 2013-04-26_18-39-52_604_zps9e74f582.jpg]
dirtydiesel
04-27-2013, 05:40 PM #1

I searched and couldn't find a definative weight, so when i pulled mine this wekend i weighed it.

It is a 606.692, fully dressed with every ancilliary full of oil, weighed 245kg

[Image: 2013-04-25_22-21-31_927_zps97d1f09e.jpg]

[Image: 2013-04-26_18-39-52_604_zps9e74f582.jpg]

raysorenson
Superturbo

1,162
04-27-2013, 10:10 PM #2
208kg for LS1 all accessories with flex plate. Probably dry.

In case you wanted to compare.
raysorenson
04-27-2013, 10:10 PM #2

208kg for LS1 all accessories with flex plate. Probably dry.

In case you wanted to compare.

mantahead
Holset

600
04-28-2013, 06:50 AM #3
good to know the weight. The 606 is a heavy beast and so are mb chassis.Smile

what you putting it into Dirty Diesel?
This post was last modified: 04-28-2013, 06:55 AM by mantahead.
mantahead
04-28-2013, 06:50 AM #3

good to know the weight. The 606 is a heavy beast and so are mb chassis.Smile

what you putting it into Dirty Diesel?

Simpler=Better
PORTED HEAD

2,127
04-28-2013, 06:25 PM #4
540lb? psshhh weigh a 617 some time!
This post was last modified: 04-28-2013, 06:28 PM by Simpler=Better.

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
04-28-2013, 06:25 PM #4

540lb? psshhh weigh a 617 some time!


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

dirtydiesel
Naturally-aspirated

5
04-29-2013, 06:19 AM #5
(04-28-2013, 06:50 AM)mantahead good to know the weight. The 606 is a heavy beast and so are mb chassis.Smile

what you putting it into Dirty Diesel?

At 245kg fully dressed it think it's actually quite light, there is probably 10kg of excess pipes and cabling because of the very rough way i cut everything to take it out.

I am going to be building a tube buggy for offroad competition events

I might start a thread as i plan on changing the accessory pack on the engine, remoting the oil and fuel filters, fitting a bosch ve pump and playing around with compound turbos
dirtydiesel
04-29-2013, 06:19 AM #5

(04-28-2013, 06:50 AM)mantahead good to know the weight. The 606 is a heavy beast and so are mb chassis.Smile

what you putting it into Dirty Diesel?

At 245kg fully dressed it think it's actually quite light, there is probably 10kg of excess pipes and cabling because of the very rough way i cut everything to take it out.

I am going to be building a tube buggy for offroad competition events

I might start a thread as i plan on changing the accessory pack on the engine, remoting the oil and fuel filters, fitting a bosch ve pump and playing around with compound turbos

mantahead
Holset

600
04-29-2013, 04:21 PM #6
sounds like fun.
mantahead
04-29-2013, 04:21 PM #6

sounds like fun.

raysorenson
Superturbo

1,162
04-29-2013, 08:44 PM #7
I don't think it's heavy either. I posted the LSx weight comparison because those things are considered very light for the torque they deliver.
raysorenson
04-29-2013, 08:44 PM #7

I don't think it's heavy either. I posted the LSx weight comparison because those things are considered very light for the torque they deliver.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)