om606 engine weight
om606 engine weight
04-27-2013, 05:40 PM
#1
It is a 606.692, fully dressed with every ancilliary full of oil, weighed 245kg
![[Image: 2013-04-25_22-21-31_927_zps97d1f09e.jpg]](http://s238.photobucket.com/user/Gmogger/media/2013-04-25_22-21-31_927_zps97d1f09e.jpg.html)
![[Image: 2013-04-26_18-39-52_604_zps9e74f582.jpg]](http://s238.photobucket.com/user/Gmogger/media/2013-04-26_18-39-52_604_zps9e74f582.jpg.html)
dirtydiesel
04-27-2013, 05:40 PM #1I searched and couldn't find a definative weight, so when i pulled mine this wekend i weighed it.
It is a 606.692, fully dressed with every ancilliary full of oil, weighed 245kg
04-27-2013, 10:10 PM
#2
In case you wanted to compare.
raysorenson
04-27-2013, 10:10 PM #2208kg for LS1 all accessories with flex plate. Probably dry.
In case you wanted to compare.
04-28-2013, 06:25 PM
#4
This post was last modified: 04-28-2013, 06:28 PM by Simpler=Better.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
04-28-2013, 06:25 PM #4540lb? psshhh weigh a 617 some time!
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
04-29-2013, 06:19 AM
#5
(04-28-2013, 06:50 AM)mantahead good to know the weight. The 606 is a heavy beast and so are mb chassis.
what you putting it into Dirty Diesel?
At 245kg fully dressed it think it's actually quite light, there is probably 10kg of excess pipes and cabling because of the very rough way i cut everything to take it out.
I am going to be building a tube buggy for offroad competition events
I might start a thread as i plan on changing the accessory pack on the engine, remoting the oil and fuel filters, fitting a bosch ve pump and playing around with compound turbos
dirtydiesel
04-29-2013, 06:19 AM #5(04-28-2013, 06:50 AM)mantahead good to know the weight. The 606 is a heavy beast and so are mb chassis.
what you putting it into Dirty Diesel?
At 245kg fully dressed it think it's actually quite light, there is probably 10kg of excess pipes and cabling because of the very rough way i cut everything to take it out.
I am going to be building a tube buggy for offroad competition events
I might start a thread as i plan on changing the accessory pack on the engine, remoting the oil and fuel filters, fitting a bosch ve pump and playing around with compound turbos
04-29-2013, 08:44 PM
#7
raysorenson
04-29-2013, 08:44 PM #7I don't think it's heavy either. I posted the LSx weight comparison because those things are considered very light for the torque they deliver.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)