STD Other FS / WTB / Buying guides wtb an om603 injection pump

wtb an om603 injection pump

wtb an om603 injection pump

 
  • 0 Vote(s) - 0 Average
 
606Power
Unregistered

23
06-24-2009, 11:15 AM #1
Hi,

I am looking for an injection pump from either the 3L or 3.5L inline six cylinder engines. Please let me know if you have one, or know of one, via PM or in this thread. Thanks!
606Power
06-24-2009, 11:15 AM #1

Hi,

I am looking for an injection pump from either the 3L or 3.5L inline six cylinder engines. Please let me know if you have one, or know of one, via PM or in this thread. Thanks!

gsxr
Gone to the M119 dark side

103
12-25-2009, 05:15 PM #2
I know this is an old post, but I've got a 3.5L core pump collecting dust on my shelf...

Dave M.
Boise, ID, USA

1997 E420 - 149kmi (Bugeyes)
1994 E420 - 136kmi (Blondie)
1994 E500 - 116kmi (Q-ship)
1992 500E - 179kmi (Mach 5)
1987 300D - 330kmi (Sportline Stage 2)
Click here for my website!
gsxr
12-25-2009, 05:15 PM #2

I know this is an old post, but I've got a 3.5L core pump collecting dust on my shelf...


Dave M.
Boise, ID, USA

1997 E420 - 149kmi (Bugeyes)
1994 E420 - 136kmi (Blondie)
1994 E500 - 116kmi (Q-ship)
1992 500E - 179kmi (Mach 5)
1987 300D - 330kmi (Sportline Stage 2)
Click here for my website!

squirrelmaster
smokey

49
12-26-2009, 06:44 AM #3
hey i've got one in good working order thats tweaked a littlebit 300 plus ship will make it yours
squirrelmaster
12-26-2009, 06:44 AM #3

hey i've got one in good working order thats tweaked a littlebit 300 plus ship will make it yours

HoleshotHolset
Holset

379
12-28-2009, 01:03 PM #4
(12-25-2009, 05:15 PM)gsxr I know this is an old post, but I've got a 3.5L core pump collecting dust on my shelf...

$? Cool

'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
12-28-2009, 01:03 PM #4

(12-25-2009, 05:15 PM)gsxr I know this is an old post, but I've got a 3.5L core pump collecting dust on my shelf...

$? Cool


'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten

gsxr
Gone to the M119 dark side

103
12-30-2009, 10:42 AM #5
(12-28-2009, 01:03 PM)HoleshotHolset
(12-25-2009, 05:15 PM)gsxr I know this is an old post, but I've got a 3.5L core pump collecting dust on my shelf...

$? Cool

OK, so here's the sad story:

I bought the 3.5L pump off eBay in February 2008, supposedly a good pump from a 350SDL. At the time, I didn't know how to check it without installing it in a car, so it sat on my shelf for 18 months. In the meantime, I learned that when you remove the side cover, the rack should move smoothly & evenly when you push it with your fingers, and should move easily when you operate the external throttle lever. After learning that, I checked out this pump, and discovered the rack doesn't move smoothly. It's not locked up, but it doesn't move nearly as easily as the working pumps on my cars. I didn't even try to install it on a car, so it has not been tested.

I think it may work fine once it's cleaned up internally so the rack moves normally, but as it sits right now, it's a core pump that needs work. I would also assume that it will need new DV seals and other external seals. I know some folks were claiming the 3.5L pumps make more power than the 3.0 pump when installed on a 3.0 engine, although I never have been able to verify that.

So to answer your question, $125, free shipping in the USA, PayPal is fine. I was going to put it on eBay for $149/obo as a core pump. I can post photos if anyone is interested. It's in decent shape, not all rusty & corroded, but it doesn't look brand new either.

Undecided
gsxr
12-30-2009, 10:42 AM #5

(12-28-2009, 01:03 PM)HoleshotHolset
(12-25-2009, 05:15 PM)gsxr I know this is an old post, but I've got a 3.5L core pump collecting dust on my shelf...

$? Cool

OK, so here's the sad story:

I bought the 3.5L pump off eBay in February 2008, supposedly a good pump from a 350SDL. At the time, I didn't know how to check it without installing it in a car, so it sat on my shelf for 18 months. In the meantime, I learned that when you remove the side cover, the rack should move smoothly & evenly when you push it with your fingers, and should move easily when you operate the external throttle lever. After learning that, I checked out this pump, and discovered the rack doesn't move smoothly. It's not locked up, but it doesn't move nearly as easily as the working pumps on my cars. I didn't even try to install it on a car, so it has not been tested.

I think it may work fine once it's cleaned up internally so the rack moves normally, but as it sits right now, it's a core pump that needs work. I would also assume that it will need new DV seals and other external seals. I know some folks were claiming the 3.5L pumps make more power than the 3.0 pump when installed on a 3.0 engine, although I never have been able to verify that.

So to answer your question, $125, free shipping in the USA, PayPal is fine. I was going to put it on eBay for $149/obo as a core pump. I can post photos if anyone is interested. It's in decent shape, not all rusty & corroded, but it doesn't look brand new either.

Undecided

HoleshotHolset
Holset

379
12-30-2009, 01:27 PM #6
(12-30-2009, 10:42 AM)gsxr So to answer your question, $125, free shipping in the USA, PayPal is fine.

Consider it sold. Cool
Before I ditch the electro-magnetic beast on my 606, I want to have an M or MW to mess around with and get my hands dirty.

PM me an email address for PayPal and I'll wire the money instantly + provide a shipping address.

Thanks,

Matt

'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
12-30-2009, 01:27 PM #6

(12-30-2009, 10:42 AM)gsxr So to answer your question, $125, free shipping in the USA, PayPal is fine.

Consider it sold. Cool
Before I ditch the electro-magnetic beast on my 606, I want to have an M or MW to mess around with and get my hands dirty.

PM me an email address for PayPal and I'll wire the money instantly + provide a shipping address.

Thanks,

Matt


'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten

gsxr
Gone to the M119 dark side

103
12-30-2009, 04:02 PM #7
Matt, PM sent with more info, and my email addy.

Dodgy
gsxr
12-30-2009, 04:02 PM #7

Matt, PM sent with more info, and my email addy.

Dodgy

HoleshotHolset
Holset

379
12-30-2009, 05:43 PM #8
(12-30-2009, 04:02 PM)gsxr Matt, PM sent with more info, and my email addy.

Dodgy

PayPal $ sent. Smile

'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
12-30-2009, 05:43 PM #8

(12-30-2009, 04:02 PM)gsxr Matt, PM sent with more info, and my email addy.

Dodgy

PayPal $ sent. Smile


'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten

gsxr
Gone to the M119 dark side

103
12-31-2009, 11:56 AM #9
The 3.5L pump is sold (thanks, Matt!). I also have a 1987 3.0L pump in similar condition, same sad story, same price, if anyone else is interested...
gsxr
12-31-2009, 11:56 AM #9

The 3.5L pump is sold (thanks, Matt!). I also have a 1987 3.0L pump in similar condition, same sad story, same price, if anyone else is interested...

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)