Old Rajay Turbo Kit 240d
Old Rajay Turbo Kit 240d
If it was my car I would! I don't think my dad will go for it i had a hard enough time convincing him to put this kit on
I'm plan on putting a Holset XY on my 617 turbo 240 4spd project with 20 25 psi boost with an inter cooler! I would also like to put bigger elements in the pump as well! I need the AIR first to keep it cool!!!! and need to find some one to grind my cam a bit! and do a little port work i would like 180-200hp and 400-500TQ we will see how the 4spd holds up 2 some abuse it only has 32k miles
back on the kit! I wet to a shop that deals with tubes and hoses and got a fitting for the back of the oil filter housing to adapt it to an-6 to match the turbo oil feed fitting! once I get it mounted and measured they will make me a custom line. I also got a an-10 fitting for the oil return! To fit in the upper oil pan where the stock drain is in the 617 turbo engine I just have to drill and bolt it in! I have to replace the lower oil pan any ways as it is dented but I have a new one and a gasket I will take some pics tomorrow if I get a chance its pretty slick