Om605 compound turbo build, my Corolla Ke70 tracktoy
Om605 compound turbo build, my Corolla Ke70 tracktoy
Time to update this a bit, have not been so much time for this, and it has also matched the wallet
Here are some pics of the the New walvesprings and washers from KM Cams
And of the cams the drive on the intake cam have been adjusted right by KM again!
Now this will not move again!!!
Now I only need New valvesealings and headbolts to build the engine up again
I have also had problem With the oilpan being the lowest point, so i have spited it and taken out about 3,5cm
Have also done some work on the front suspension, and the New EBC discs from Nissan Skyline R32 GTR have been redrilled to fit the 4x114 hubs. The disc size is 296x32mm
Did some adjustments on the coils
mounted in the new pads in the calipers, witch also are from R32 GTR
only needs new bolts to mount the calipers.
Tightened all suspension up, and then I needed to widen the steeringarms
Got new studs, but they were to small in the splines, so needs new.
Hope I can start rebuild the engine very soon