Om605 compound turbo build, my Corolla Ke70 tracktoy
Om605 compound turbo build, my Corolla Ke70 tracktoy
(12-08-2013, 03:00 AM)erling66 Have you tried to adjust the alda to get rid of some of that smoke? Should be no problem with that nice Dieselmeken aldaYes I can turn it Down a bit on the alda, but it ist adjusted up much at all. But I have about zero boost before 3000rpm, and it slams right on 2,6 bar on 3100-3200rpm. With compuond I can get the boost from about 2000rpm and more power and drivability On the video it loose grip on the Wheels so doesnt get full boost, derfor it smokes more than usual also
(12-08-2013, 04:50 AM)uli124125 hiI have a gearbox ready to put in, so start With that. But interresting what you say about put a bearing in the flywheel Must check my flywheel (lightwight) to see if i can put a bearing in that. Is it the same splines on the gearbox shaft?
why not using a 6 speed Benz transmission?
the bellhouse fits and the income shaft can be hold with a bearing wheel in the flywheel
uli
(12-08-2013, 03:00 AM)erling66 Have you tried to adjust the alda to get rid of some of that smoke? Should be no problem with that nice Dieselmeken aldaYes I can turn it Down a bit on the alda, but it ist adjusted up much at all. But I have about zero boost before 3000rpm, and it slams right on 2,6 bar on 3100-3200rpm. With compuond I can get the boost from about 2000rpm and more power and drivability On the video it loose grip on the Wheels so doesnt get full boost, derfor it smokes more than usual also
(12-08-2013, 04:50 AM)uli124125 hiI have a gearbox ready to put in, so start With that. But interresting what you say about put a bearing in the flywheel Must check my flywheel (lightwight) to see if i can put a bearing in that. Is it the same splines on the gearbox shaft?
why not using a 6 speed Benz transmission?
the bellhouse fits and the income shaft can be hold with a bearing wheel in the flywheel
uli