Om605 compound turbo build, my Corolla Ke70 tracktoy
Om605 compound turbo build, my Corolla Ke70 tracktoy
The flywheel is OEM Mercedes and the spec is to Mercedes, but I dont know eksakt wich Merc the flywheels is from. That might have been the problem with the pressureplate
Rear axle is down, here is Ke70 vs Volvo 240
the 240 one is 1cm narrower without brakediscs, så it is quite perfekt for this car. Got all the old brackets of it
Time to open it and se, and it have taken som good beating. It has been used on a heavy 240 with 400hp v8, and some of the welding had cracks, and the oil had alot metallic effects :p
time to get in some new oil :p
starting on the new brackets
And finish measuring it up, ready to be welded on. Made them a little longer than the stock, because the car is quite low, to get the bars in more right angle
brackets on, and axle under the car. Will put it on the lower bars, and do the measuring under there to get the upper bars in correct position
allso welded over the diff, hoping it can hold one more season To be continued next weekend