Om605 compound turbo build, my Corolla Ke70 tracktoy
Om605 compound turbo build, my Corolla Ke70 tracktoy
(03-25-2013, 09:21 PM)MFSuper90 You people overseas get to have all the funIt doesent get anymore fun than what you make out of it
(03-26-2013, 03:20 AM)Ksteen2 I think you should lift it a Inch or two, and then mount a skidd plateCant lift it anymore, have already lifted it quite much Can say, Im a bit low-addicted Think I have to make some kind of shield yes
(03-26-2013, 03:44 AM)HaavardPYA Don`t know how much space there is between the oilsump and the oilpump on the OM engines. But on the s38 i mounted in my Granada i had to cut down the oilsumps height and make it wider. I also mounted it straight so it needed to be flat instead of the original 20degrees or so. So to cut the pan maybe a good optionDont think there is "enough" space, but that have been one alterantiv yes, to cut and lift the oilpan, and widen it instead. Cant lift the engine, already have to cut out some of the suports in the hood to close it ;p Thanks! Very litle parts that fits, så there is alot custom going on ;p
But if the engine can be lifted that would be a solution. But then again, the weight will come higher up.
Keep up the good work! I admire all your custom solutions! Love this project
(03-25-2013, 09:21 PM)MFSuper90 You people overseas get to have all the funIt doesent get anymore fun than what you make out of it
(03-26-2013, 03:20 AM)Ksteen2 I think you should lift it a Inch or two, and then mount a skidd plateCant lift it anymore, have already lifted it quite much Can say, Im a bit low-addicted Think I have to make some kind of shield yes
(03-26-2013, 03:44 AM)HaavardPYA Don`t know how much space there is between the oilsump and the oilpump on the OM engines. But on the s38 i mounted in my Granada i had to cut down the oilsumps height and make it wider. I also mounted it straight so it needed to be flat instead of the original 20degrees or so. So to cut the pan maybe a good optionDont think there is "enough" space, but that have been one alterantiv yes, to cut and lift the oilpan, and widen it instead. Cant lift the engine, already have to cut out some of the suports in the hood to close it ;p Thanks! Very litle parts that fits, så there is alot custom going on ;p
But if the engine can be lifted that would be a solution. But then again, the weight will come higher up.
Keep up the good work! I admire all your custom solutions! Love this project