Om605 compound turbo build, my Corolla Ke70 tracktoy

STD Other Projects Om605 compound turbo build, my Corolla Ke70 tracktoy

View a Printable Version

2 Vote(s) - 5 Average

Pages (7): Previous 1 … 3 4 5 6 7 Next

Stamsaas

GT2256V

155

03-01-2014, 05:26 PM #201

Was out and got the hoses to oil and oilreturn today

[Image: 20140301_105609_zpsd83d665d.jpg]

Welded ut the pipes

[Image: 20140301_132540_zps3fc3d4f4.jpg]

[Image: 20140301_132611_zps19107643.jpg]

Made a suport to the lower turbo

[Image: 20140301_160939_zps4f0c9635.jpg]

and one on the pipe that holds the big turbo

[Image: 20140301_160947_zps08accfe7.jpg]

Then I made the manifold finish, welded up the v-band and got in the fittings to exhausttemp and exhaustpressure Smile

[Image: 20140301_184700_zps5e706a6c.jpg]

all finish

[Image: 20140301_184706_zps5627fa49.jpg]

The airside is so much easier then the exhaustside Big Grin

Stamsaas

03-01-2014, 05:26 PM #201

Was out and got the hoses to oil and oilreturn today

[Image: 20140301_105609_zpsd83d665d.jpg]

Welded ut the pipes

[Image: 20140301_132540_zps3fc3d4f4.jpg]

[Image: 20140301_132611_zps19107643.jpg]

Made a suport to the lower turbo

[Image: 20140301_160939_zps4f0c9635.jpg]

and one on the pipe that holds the big turbo

[Image: 20140301_160947_zps08accfe7.jpg]

Then I made the manifold finish, welded up the v-band and got in the fittings to exhausttemp and exhaustpressure Smile

[Image: 20140301_184700_zps5e706a6c.jpg]

all finish

[Image: 20140301_184706_zps5627fa49.jpg]

The airside is so much easier then the exhaustside Big Grin

EDH_Performance

Holset

537

03-02-2014, 01:48 AM #202

So left to do is port and polish the manifolds and pipes? Big Grin

Looks very good there Alex Wink

EDH_Performance

03-02-2014, 01:48 AM #202

So left to do is port and polish the manifolds and pipes? Big Grin
Looks very good there Alex Wink

F.R.A.S

Holset

579

03-02-2014, 12:59 PM #203

Please do not polish Big Grin

I'm allergic to polished stuff Tongue

Looks good. Just some paint on that stuff and it will look like a stock installation.

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

03-02-2014, 12:59 PM #203

Please do not polish Big Grin I'm allergic to polished stuff Tongue

Looks good. Just some paint on that stuff and it will look like a stock installation.

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

EDH_Performance

Holset

537

03-02-2014, 04:56 PM #204

(03-02-2014, 12:59 PM)F.R.A.S Please do not polish I'm allergic to polished stuff

Looks good. Just some paint on that stuff and it will look like a stock installation.

In polish we ask not, we do!

EDH_Performance

03-02-2014, 04:56 PM #204

(03-02-2014, 12:59 PM)F.R.A.S Please do not polish I'm allergic to polished stuff

Looks good. Just some paint on that stuff and it will look like a stock installation.

In polish we ask not, we do!

Stamsaas

GT2256V

155

03-04-2014, 10:26 AM #205

Neh, dont think I will polish them, I will wrap all that can be wrapped Smile

Remowed the head yesterday

[Image: 20140303_135847_zps33603012.jpg]

[Image: 20140303_201219_zpsb26ee9ce.jpg]

[Image: 20140303_201231_zps21377796.jpg]

Had a little surprise when I remowed the camshafts, the drive in the intake cam had slipped, and moved 2-3mm of the camshaft. This morning I was on KM Cams and picked up new walvesprings, and had the cam with me. compaired it to a stock Om606 camshaft he had, he measured it and it had also moved 1mm sideways! Guess I was lucky then, this whould have been a serious brakedown anytime! :O

This post was last modified: 03-04-2014, 10:26 AM by Stamsaas.

Stamsaas

03-04-2014, 10:26 AM #205

Neh, dont think I will polish them, I will wrap all that can be wrapped Smile

Remowed the head yesterday

[Image: 20140303_135847_zps33603012.jpg]

[Image: 20140303_201219_zpsb26ee9ce.jpg]

[Image: 20140303_201231_zps21377796.jpg]

Had a little surprise when I remowed the camshafts, the drive in the intake cam had slipped, and moved 2-3mm of the camshaft. This morning I was on KM Cams and picked up new walvesprings, and had the cam with me. compaired it to a stock Om606 camshaft he had, he measured it and it had also moved 1mm sideways! Guess I was lucky then, this whould have been a serious brakedown anytime! :O

sorin_cel

5fingers on a hand, 5cylinders block

71

04-05-2014, 12:05 PM #206

you mean the pin where sprocket sits on the camshaft had moved???

sorin_cel

04-05-2014, 12:05 PM #206

you mean the pin where sprocket sits on the camshaft had moved???

Stamsaas

GT2256V

155

04-20-2014, 12:57 PM #207

Time to update this a bit, have not been so much time for this, and it has also matched the wallet Smile

Here are some pics of the the New walvesprings and washers from KM Cams

[Image: 20140412_140027_zpsc1759f7c.jpg]

[Image: 20140412_140033_zps99aca916.jpg]

And of the cams Smile

the drive on the intake cam have been adjusted right by KM again! Smile

[Image: 20140412_134057_zps8e9e9b2a.jpg]

[Image: 20140412_134742_zps1751c6d2.jpg]

Now this will not move again!!!

[Image: 20140412_135807_zps0a1a07bd.jpg]

Now I only need New valvesealings and headbolts to build the engine up again Smile

I have also had problem With the oilpan being the lowest point, so i have spited it and taken out about 3,5cm

[Image: 20140317_193923_zps256387fc.jpg]

[Image: 20140317_193928_zps1922e8be.jpg]

Have also done some work on the front suspension, and the New EBC discs from Nissan Skyline R32 GTR have been redrilled to fit the 4x114 hubs. The disc size is 296x32mm

[Image: 20140418_104737_zpsf153c28c.jpg]

[Image: 20140418_104737_zpsf153c28c.jpg]

Did some adjustments on the coils

[Image: 20140418_113319_zpsdf032eb0.jpg]

mounted in the new pads in the calipers, witch also are from R32 GTR

[Image: 20140418_121541_zps2879e6fc.jpg]

only needs new bolts to mount the calipers.
Tightened all suspension up, and then I needed to widen the steeringarms

[Image: 20140418_153231_zps0bf47f75.jpg]

[Image: 20140418_153231_zps0bf47f75.jpg]

Got new studs, but they were to small in the splines, so needs new.

Hope I can start rebuild the engine very soon Smile

Stamsaas

04-20-2014, 12:57 PM #207

Time to update this a bit, have not been so much time for this, and it has also matched the wallet Smile

Here are some pics of the the New walvesprings and washers from KM Cams

[Image: 20140412_140027_zpsc1759f7c.jpg]

[Image: 20140412_140033_zps99aca916.jpg]

And of the cams Smile the drive on the intake cam have been adjusted right by KM again! Smile

[Image: 20140412_134057_zps8e9e9b2a.jpg]

[Image: 20140412_134742_zps1751c6d2.jpg]

Now this will not move again!!!

[Image: 20140412_135807_zps0a1a07bd.jpg]

Now I only need New valvesealings and headbolts to build the engine up again Smile

I have also had problem With the oilpan being the lowest point, so i have spited it and taken out about 3,5cm

[Image: 20140317_193923_zps256387fc.jpg]

[Image: 20140317_193928_zps1922e8be.jpg]

Have also done some work on the front suspension, and the New EBC discs from Nissan Skyline R32 GTR have been redrilled to fit the 4x114 hubs. The disc size is 296x32mm

[Image: 20140418_104737_zpsf153c28c.jpg]

Did some adjustments on the coils

[Image: 20140418_113319_zpsdf032eb0.jpg]

mounted in the new pads in the calipers, witch also are from R32 GTR

[Image: 20140418_121541_zps2879e6fc.jpg]

only needs new bolts to mount the calipers.
Tightened all suspension up, and then I needed to widen the steeringarms

[Image: 20140418_153231_zps0bf47f75.jpg]

Got new studs, but they were to small in the splines, so needs new.

Hope I can start rebuild the engine very soon Smile

F.R.A.S

Holset

579

04-21-2014, 03:10 AM #208

Nice, looks good mate. Keep it up.

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

04-21-2014, 03:10 AM #208

Nice, looks good mate. Keep it up.

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

giuliettaevo

Naturally-aspirated

11

04-23-2014, 03:35 PM #209

Very nice project! Will definetely surprise a few people. Also love the wheels...

We did something similar wit an old VW jetta which we gave an OM606 and rwd.

For my old Alfa Romeo Giulia i'm looking for a nice powerful diesel engine but it has a rather short engine bay. The OM606 doesn't fit for sure but maybe the OM605 will. Could you tell me the total length of the engine from crankpulley to the rear of the block where the box goes?

giuliettaevo

04-23-2014, 03:35 PM #209

hansebanger77

606

232

04-25-2014, 05:11 PM #210

(04-23-2014, 03:35 PM)giuliettaevo Very nice project! Will definetely surprise a few people. Also love the wheels...

We did something similar wit an old VW jetta which we gave an OM606 and rwd.

For my old Alfa Romeo Giulia i'm looking for a nice powerful diesel engine but it has a rather short engine bay. The OM606 doesn't fit for sure but maybe the OM605 will. Could you tell me the total length of the engine from crankpulley to the rear of the block where the box goes?

I saw your jetta at reifnitz :-)

hansebanger77

04-25-2014, 05:11 PM #210

(04-23-2014, 03:35 PM)giuliettaevo Very nice project! Will definetely surprise a few people. Also love the wheels...

We did something similar wit an old VW jetta which we gave an OM606 and rwd.

For my old Alfa Romeo Giulia i'm looking for a nice powerful diesel engine but it has a rather short engine bay. The OM606 doesn't fit for sure but maybe the OM605 will. Could you tell me the total length of the engine from crankpulley to the rear of the block where the box goes?

I saw your jetta at reifnitz :-)

giuliettaevo

Naturally-aspirated

11

04-26-2014, 02:51 PM #211

It's my friends car, i just build it with him.

He went to the VW meeting. Surprized quite a few people there..

giuliettaevo

04-26-2014, 02:51 PM #211

It's my friends car, i just build it with him.

He went to the VW meeting. Surprized quite a few people there..

F.R.A.S

Holset

579

06-22-2014, 03:25 PM #212

Time to update Alex Big Grin

We all like to see your car on the track again. Gatebil @Rudskogen 2014 Smile

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

06-22-2014, 03:25 PM #212

Time to update Alex Big Grin

We all like to see your car on the track again. Gatebil @Rudskogen 2014 Smile

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Simpler=Better

PORTED HEAD

2,127

06-23-2014, 08:28 AM #213

I really like the pinned cam gear, that's the way to do it Smile

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up

larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Simpler=Better

06-23-2014, 08:28 AM #213

I really like the pinned cam gear, that's the way to do it Smile

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up

larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Stamsaas

GT2256V

155

06-25-2014, 03:12 PM #214

Yeah, its time to update this! Big Grin

Have done some work on the engine, now and then, but havent had the time to update. Will come a big update very soon, maybe this weekend Big Grin

Stamsaas

06-25-2014, 03:12 PM #214

Yeah, its time to update this! Big Grin Have done some work on the engine, now and then, but havent had the time to update. Will come a big update very soon, maybe this weekend

Stamsaas

GT2256V

155

06-29-2014, 05:34 AM #215

(04-23-2014, 03:35 PM)giuliettaevo Very nice project! Will definetely surprise a few people. Also love the wheels...

We did something similar wit an old VW jetta which we gave an OM606 and rwd.

For my old Alfa Romeo Giulia i'm looking for a nice powerful diesel engine but it has a rather short engine bay. The OM606 doesn't fit for sure but maybe the OM605 will. Could you tell me the total length of the engine from crankpulley to the rear of the block where the box goes?

Thanks!

I think the engine is 74-75cm long, but I can measure it when Im back in the garage Smile

I saw the videos of the Jetta, looks fun! Big Grin

And here in the update!

Here are Picture of the valveseat before and after grinding with grindingpaste, as you see the exhaustports are not good!

[Image: 20140518_160546_zps2350d5bd.jpg]

[Image: 20140518_160546_zps2350d5bd.jpg]

Head with new KM Cams valvesprings and springwashers

[Image: 20140519_203404_zps443cc46f.jpg]

I also grinded over all ports on intake and exhaust side to even out any edges etc.
Head on, with new gasket

[Image: 20140525_191426_zpsc966c51f.jpg]

had to grind down the valvespacers a bit to fit on the valves, also from KM Cams

[Image: 20140604_191051_zps9ffa4ae1.jpg]

Cambridge, lifters and camshaft in, the red stuff is a drivein-paste for camshafts

[Image: 20140604_194939_zps09b19056.jpg]

all in

[Image: 20140604_203715_zps6f2cb4ca.jpg]

[Image: 20140604_205755_zpsfb6a181b.jpg]

The headcover is painted and mounted, and I have got the new oilpump from 270CDI. This is lower to fit in the oilpan, and some says it is better on high revs Smile

The pickup tube is shorted in to fit he pan, other than that, plug and play! Smile

[Image: 20140625_180737_zps5bf60a42.jpg]

And F-Tune Performance in Sweden have made this custom intake manifold to me, this will guaranty good flow and even airflow to each sylinder! Big Grin

[Image: 20140628_134207_zpsed52685b.jpg]

The oilpan was welded yesterday, so maybe there is a startup next week?? Big Grin

This post was last modified: 06-29-2014, 05:54 AM by Stamsaas.

Stamsaas

06-29-2014, 05:34 AM #215

(04-23-2014, 03:35 PM)giuliettaevo Very nice project! Will definetely surprise a few people. Also love the wheels...

We did something similar wit an old VW jetta which we gave an OM606 and rwd.

For my old Alfa Romeo Giulia i'm looking for a nice powerful diesel engine but it has a rather short engine bay. The OM606 doesn't fit for sure but maybe the OM605 will. Could you tell me the total length of the engine from crankpulley to the rear of the block where the box goes?

Thanks!

I think the engine is 74-75cm long, but I can measure it when Im back in the garage Smile

I saw the videos of the Jetta, looks fun! Big Grin

And here in the update!

Here are Picture of the valveseat before and after grinding with grindingpaste, as you see the exhaustports are not good!

[Image: 20140518_160546_zps2350d5bd.jpg]

Head with new KM Cams valvesprings and springwashers

[Image: 20140519_203404_zps443cc46f.jpg]

I also grinded over all ports on intake and exhaust side to even out any edges etc.
Head on, with new gasket

[Image: 20140525_191426_zpsc966c51f.jpg]

had to grind down the valvespacers a bit to fit on the valves, also from KM Cams

[Image: 20140604_191051_zps9ffa4ae1.jpg]

Cambridge, lifters and camshaft in, the red stuff is a drivein-paste for camshafts

[Image: 20140604_194939_zps09b19056.jpg]

all in

The headcover is painted and mounted, and I have got the new oilpump from 270CDI. This is lower to fit in the oilpan, and some says it is better on high revs Smile

The pickup tube is shorted in to fit he pan, other than that, plug and play! Smile

And F-Tune Performance in Sweden have made this custom intake manifold to me, this will guaranty good flow and even airflow to each sylinder! Big Grin

The oilpan was welded yesterday, so maybe there is a startup next week?? Big Grin

Turbo

Holset

489

06-29-2014, 07:50 AM #216

it would be very interesting to see the calculation about VE efficiency before and after to see how much it was improved

Turbo

06-29-2014, 07:50 AM #216

it would be very interesting to see the calculation about VE efficiency before and after to see how much it was improved

Stamsaas

GT2256V

155

07-01-2014, 02:47 PM #217

Engine back in one piece! Smile

[Image: 20140701_203506_zpse90b360e.jpg]

Stamsaas

07-01-2014, 02:47 PM #217

Engine back in one piece! Smile

[Image: 20140701_203506_zpse90b360e.jpg]

Tito

Holset

354

07-01-2014, 03:06 PM #218

I love this ride!

Tito

07-01-2014, 03:06 PM #218

I love this ride!

Stamsaas

GT2256V

155

07-03-2014, 03:15 PM #219

Thanks!

[Image: 20140702_201208_zps5ed5ba4e.jpg]

Stamsaas

07-03-2014, 03:15 PM #219

Thanks! Big Grin

[Image: 20140702_201208_zps5ed5ba4e.jpg]

F.R.A.S

Holset

579

07-04-2014, 05:09 AM #220

Looks great Big Grin

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

07-04-2014, 05:09 AM #220

Looks great Big Grin

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

rafael cotrim

Holset hx55 eaton90

22

07-04-2014, 05:45 AM #221

pretty awesome

If it don`t blow smoke , it must be broke ! W201- Angel

rafael cotrim

07-04-2014, 05:45 AM #221

pretty awesome

If it don`t blow smoke , it must be broke ! W201- Angel

Stamsaas

GT2256V

155

07-05-2014, 12:05 PM #222

Thanks!

Today I took out the spare gearbox, and it got new oil Smile

[Image: 20140705_135240_zpsd1a84421.jpg]

The boxes are the same outside, and pretty much the same inside, sligth difference on some gears Smile

But no 3.gear burnout while standing still With this Box :p

I timed the pump 2 degrees and had the lid of the pump and turned up the max revs. It should be around 6500rpm now Smile

[Image: 20140705_135254_zpse351bc5a.jpg]

LIftet the body up on stands and put the gearbox on the engine. Then it was time to put the Madness into the car Smile

was alone today, but got it in! Big Grin

[Image: 20140705_153337_zps99bc5d14.jpg]

maybe a test start tomorrow or monday! Big Grin

Stamsaas

07-05-2014, 12:05 PM #222

Thanks! Smile Today I took out the spare gearbox, and it got new oil Smile

[Image: 20140705_135240_zpsd1a84421.jpg]

The boxes are the same outside, and pretty much the same inside, sligth difference on some gears Smile But no 3.gear burnout while standing still With this Box :p

I timed the pump 2 degrees and had the lid of the pump and turned up the max revs. It should be around 6500rpm now Smile

[Image: 20140705_135254_zpse351bc5a.jpg]

LIftet the body up on stands and put the gearbox on the engine. Then it was time to put the Madness into the car Smile was alone today, but got it in! Big Grin

[Image: 20140705_153337_zps99bc5d14.jpg]

maybe a test start tomorrow or monday!

StrikerofDeath

Naturally-aspirated

13

07-05-2014, 06:28 PM #223

I love this project!
but ... you add more power, one more turbo and reduce oil capacity of engine?
at high rpm you have oil in pan for engine?

I will continue follow the project, this fabulous! good luck!

StrikerofDeath

07-05-2014, 06:28 PM #223

Stamsaas

GT2256V

155

07-06-2014, 06:52 AM #224

Thanks!

the oilpan is a litle lower now, but not that much Smile

it still have a capasaty of 4l in the sump Smile

becouse of the tight space in the bay ut was not build out now, but might do that in the winter again sinse we now can measure the clearance Smile

the reason to reduse the hight of the oilpan is that tha car is to litle to fit this high engine, oilpan would have been smashed if I had gone of track as it was Smile

Stamsaas

07-06-2014, 06:52 AM #224

Thanks! Smile the oilpan is a litle lower now, but not that much Smile it still have a capasaty of 4l in the sump Smile becouse of the tight space in the bay ut was not build out now, but might do that in the winter again sinse we now can measure the clearance Smile the reason to reduse the hight of the oilpan is that tha car is to litle to fit this high engine, oilpan would have been smashed if I had gone of track as it was Smile

Stamsaas

GT2256V

155

07-07-2014, 05:28 PM #225

It has started, and its so much more brutal now!! Big Grin

Stamsaas

07-07-2014, 05:28 PM #225

It has started, and its so much more brutal now!! Big Grin

StrikerofDeath

Naturally-aspirated

13

07-07-2014, 06:45 PM #226

see this
http://www.tuning.online.pt/forum/sx-s13-t71872p18.html # post917006
you can make the oil pan shorter but larger!

good sound! make more video!

StrikerofDeath

07-07-2014, 06:45 PM #226

see this
http://www.tuning.online.pt/forum/sx-s13-t71872p18.html # post917006
you can make the oil pan shorter but larger!

good sound! make more video!

Sotvisp

K26-2

42

07-08-2014, 02:38 AM #227

This must be the best Toyota in the world !!

Diesel Power

Sotvisp

07-08-2014, 02:38 AM #227

This must be the best Toyota in the world !!

Diesel Power

Stamsaas

GT2256V

155

07-08-2014, 02:39 AM #228

I know how to make the pan wider, but this is not a big ass Mercedes, Space is luxury here Wink

but I might be able to build it a bit out on one side to the Winter Smile

Stamsaas

07-08-2014, 02:39 AM #228

I know how to make the pan wider, but this is not a big ass Mercedes, Space is luxury here Wink but I might be able to build it a bit out on one side to the Winter Smile

Simpler=Better

PORTED HEAD

2,127

07-08-2014, 09:30 AM #229

(07-08-2014, 02:39 AM)Stamsaas I know how to make the pan wider, but this is not a big ass Mercedes, Space is luxury here but I might be able to build it a bit out on one side to the Winter

You could dry sump it and be a hero releasing the specs

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up

larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Simpler=Better

07-08-2014, 09:30 AM #229

(07-08-2014, 02:39 AM)Stamsaas I know how to make the pan wider, but this is not a big ass Mercedes, Space is luxury here but I might be able to build it a bit out on one side to the Winter

You could dry sump it and be a hero releasing the specs

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up

larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Stamsaas

GT2256V

155

07-09-2014, 08:11 AM #230

Thanks Sotvisp! Big Grin

its not so much Toyota left, so maybe thats why? Big Grin

Will go back to the garage today, try to do some more Smile

anyone have experience with racecams, should the timing be the same, or should it be slighly different because of the Cams?

I have to cut of some of the tube in on the new manifold, its a bit to long for the bay, but rest of it fits like a glove! Big Grin

Stamsaas

07-09-2014, 08:11 AM #230

Thanks Sotvisp! Big Grin its not so much Toyota left, so maybe thats why?

Will go back to the garage today, try to do some more Smile anyone have experience with racecams, should the timing be the same, or should it be slighly different because of the Cams?

I have to cut of some of the tube in on the new manifold, its a bit to long for the bay, but rest of it fits like a glove! Big Grin

MFSuper90

Budget Builder

1,533

07-09-2014, 08:19 AM #231

Bigger Cams have to be set with a degree wheel to be correctly timed
We had to do this on my Perkins when we put a big cam in it.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin

'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted

MFSuper90

07-09-2014, 08:19 AM #231

Bigger Cams have to be set with a degree wheel to be correctly timed
We had to do this on my Perkins when we put a big cam in it.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin

'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted

Stamsaas

GT2256V

155

07-09-2014, 08:01 PM #232

The camshafts have been set up by KM Cams, it is the pump timing that i Wonder about. Someone here must have swaped cams before?? Smile

Stamsaas

07-09-2014, 08:01 PM #232

The camshafts have been set up by KM Cams, it is the pump timing that i Wonder about. Someone here must have swaped cams before?? Smile

raysorenson

Superturbo

1,162

07-10-2014, 11:28 AM #233

Strictly speaking of theory, an increase in volumetric efficiency often requires retarded combustion.

raysorenson

07-10-2014, 11:28 AM #233

Strictly speaking of theory, an increase in volumetric efficiency often requires retarded combustion.

MFSuper90

Budget Builder

1,533

07-10-2014, 01:47 PM #234

(07-09-2014, 08:01 PM)Stamsaas The camshafts have been set up by KM Cams, it is the pump timing that i Wonder about. Someone here must have swaped cams before??

Are we talking about the injection pump cam?
So are you wondering if you should change timing since you got a different cam?

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin

'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted

MFSuper90

07-10-2014, 01:47 PM #234

(07-09-2014, 08:01 PM)Stamsaas The camshafts have been set up by KM Cams, it is the pump timing that i Wonder about. Someone here must have swaped cams before??

Are we talking about the injection pump cam?
So are you wondering if you should change timing since you got a different cam?

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin

'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted

winmutt

bitbanger

3,468

07-10-2014, 01:59 PM #235

717.430 trans?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt

07-10-2014, 01:59 PM #235

717.430 trans?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Stamsaas

GT2256V

155

07-13-2014, 11:39 AM #236

(07-10-2014, 11:28 AM)raysorenson Strictly speaking of theory, an increase in volumetric efficiency often requires retarded combustion.

Retarded, will that say earlier og later? Smile

(not that good English)

(07-10-2014, 01:47 PM)MFSuper90
(07-09-2014, 08:01 PM)Stamsaas The camshafts have been set up by KM Cams, it is the pump timing that i Wonder about. Someone here must have swaped cams before??

Are we talking about the injection pump cam?
So are you wondering if you should change timing since you got a different cam?

No, I have now race intake and exhaust camshafts in the engine, and I wonder how this effects the timing point of the fuelpump Smile

And if anyone have any experience with this Smile

(07-10-2014, 01:59 PM)winmutt 717.430 trans?

I had 717.435 but the 3.gear didnt take it when I tried to turn rubber Smile

Now I put in a 717.411 gearbox Smile

I have also got a Tilton clutch valve now, and this will make the gearbox life better Smile

Stamsaas

07-13-2014, 11:39 AM #236

(07-10-2014, 11:28 AM)raysorenson Strictly speaking of theory, an increase in volumetric efficiency often requires retarded combustion.

Retarded, will that say earlier og later? Smile

(not that good English)

(07-10-2014, 01:47 PM)MFSuper90
(07-09-2014, 08:01 PM)Stamsaas The camshafts have been set up by KM Cams, it is the pump timing that i Wonder about. Someone here must have swaped cams before??

Are we talking about the injection pump cam?
So are you wondering if you should change timing since you got a different cam?

No, I have now race intake and exhaust camshafts in the engine, and I wonder how this effects the timing point of the fuelpump Smile

And if anyone have any experience with this Smile

(07-10-2014, 01:59 PM)winmutt 717.430 trans?

I had 717.435 but the 3.gear didnt take it when I tried to turn rubber Smile

Now I put in a 717.411 gearbox Smile

I have also got a Tilton clutch valve now, and this will make the gearbox life better Smile

Petar

7.5mm M pump

459

07-13-2014, 02:17 PM #237

Retarded means later, advanced means earlier. Are you asking should you change the timing of the injection pump because you have different cams ? I don't know maybe.Only one way to find out. Try changing the timing try retarded and try advanced and see what gives the best result on power and EGTs etc. Trial and error Big Grin

Petar

07-13-2014, 02:17 PM #237

Stamsaas

GT2256V

155

07-13-2014, 02:52 PM #238

Thanks!

Yeah, I think that is the way to do it Smile

I hope I will get it in a dyno this year, and there I can test it quite good Smile

Stamsaas

07-13-2014, 02:52 PM #238

Thanks! Smile Yeah, I think that is the way to do it Smile I hope I will get it in a dyno this year, and there I can test it quite good Smile

MFSuper90

Budget Builder

1,533

07-13-2014, 08:09 PM #239

I do know if you advance the timing EGT's will drop, and advanced timing makes bigger power on top end. When we put the Big Cam in my Perkins we adjusted the timing on the dyno and set it to where it made the most HP Wink

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin

'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted

MFSuper90

07-13-2014, 08:09 PM #239

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin

'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted

Stamsaas

GT2256V

155

07-14-2014, 03:34 PM #240

think it will be finetuning in the dyno Wink

It work good enought for now Big Grin

Stamsaas

07-14-2014, 03:34 PM #240

think it will be finetuning in the dyno Wink It work good enought for now Big Grin

F.R.A.S

Holset

579

07-16-2014, 04:56 AM #241

Awesome =)

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

07-16-2014, 04:56 AM #241

Awesome =)

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Gasoil

K26-2

46

07-19-2014, 06:06 AM #242

Hi Stamsaas, you use valve cap lash from KM to give again the same measure between hydraulic follower and new regrinded cams? The hydraulic follower not lift at the new cam regrinded lobe when engine is started by oil pressure? For example in gas engines with hydraulic followers you can fit racing cams with more lift, and no valve cap lashs are used.

I checked the N/A OM606 intake cam and has 1,3mm more lift than OM turbo one, fitted to the engine and all OK (bad luck a small plastic piece from fuel tubes fittings went into an intake valve of cyl 5 , started without manifold, and a intake valve was bent).

Gasoil

07-19-2014, 06:06 AM #242

Stamsaas

GT2256V

155

07-25-2014, 04:16 PM #243

Hi, I have spacers on the intake valves if it is theese you are thinking of;

[Image: 20140604_191051_zps9ffa4ae1.jpg]

They are only on the intake side, this is because the hydraulic lifters only makes about 1mm more lift than oem. The exhaust side have about 1mm more lift, so the lifters take that, and the intake have about 2mm more lift, så they are spaced 1mm Smile

When I was at KM cams and picked up cams, he had taken one N/A cam and one turbo cam and measured them, and he said that the N/A cam had about 1mm more lift, but that the duration or what it is (not my field) made ha cam so much milder, that he could not se any gain in performance using N/A cam. He ment that it might be some slightly difference if you got them timed good, but cams must be grinded to get performance Smile

Now; a little update Smile

Picked up my new driving Chair

[Image: 20140715_192821_zps21d82d99.jpg]

And the manifolds have been machined so the flenges are straight, and I was out on a local farm and had them sand blasted. So than I just had to Mount them Smile

Here with new coppergasket, exhaust pressure and backpressure on Place

[Image: 20140719_212349_zpsceb51295.jpg]

wrapped the last bits

[Image: 20140719_223232_zpsdcd752e5.jpg]

first turbo mounted, and the supportbar on the underside

[Image: 20140719_223242_zps3848fee2.jpg]

now it startet to get a bit tighter... The tube to the wastegate was the only tube that was made outside the car, and the only that did not fit in the car..... So had to make som more room with the hammer!

[Image: 20140720_112413_zps071f441d.jpg]

[Image: 20140720_112413_zps071f441d.jpg]

suddenly much more room, Next turbo pleace!

[Image: 20140720_122237_zps590803f8.jpg]

Had to remake the fittings to the oilreturn, it hit with the support bar to the turbo etc. But I made it. Its tight to get Down 2x oilreturn etc. Engine have run with both turbos on Big Grin

This will start building pressure from the first touch on the trothle Big Grin

Took out the rear axle to get the diff swapped. The oil had a rather fancy color :p

[Image: 20140722_180135_zps20f0cd67.jpg]

part out on the table

[Image: 20140722_201235_zps4ca2279e.jpg]

well... dont have to tell you what have made noise here Big Grin

[Image: 20140722_201301_zpsd82fd173.jpg]

Had 3.73:1 ratio but are now swapping to 3.54:1 to get it a bit longer Smile

Stamsaas

07-25-2014, 04:16 PM #243

Hi, I have spacers on the intake valves if it is theese you are thinking of;

[Image: 20140604_191051_zps9ffa4ae1.jpg]

They are only on the intake side, this is because the hydraulic lifters only makes about 1mm more lift than oem. The exhaust side have about 1mm more lift, so the lifters take that, and the intake have about 2mm more lift, så they are spaced 1mm Smile

When I was at KM cams and picked up cams, he had taken one N/A cam and one turbo cam and measured them, and he said that the N/A cam had about 1mm more lift, but that the duration or what it is (not my field) made ha cam so much milder, that he could not se any gain in performance using N/A cam. He ment that it might be some slightly difference if you got them timed good, but cams must be grinded to get performance Smile

Now; a little update Smile

Picked up my new driving Chair

[Image: 20140715_192821_zps21d82d99.jpg]

And the manifolds have been machined so the flenges are straight, and I was out on a local farm and had them sand blasted. So than I just had to Mount them Smile Here with new coppergasket, exhaust pressure and backpressure on Place

[Image: 20140719_212349_zpsceb51295.jpg]

wrapped the last bits

[Image: 20140719_223232_zpsdcd752e5.jpg]

first turbo mounted, and the supportbar on the underside

[Image: 20140719_223242_zps3848fee2.jpg]

now it startet to get a bit tighter... The tube to the wastegate was the only tube that was made outside the car, and the only that did not fit in the car..... So had to make som more room with the hammer!

[Image: 20140720_112413_zps071f441d.jpg]

suddenly much more room, Next turbo pleace!

[Image: 20140720_122237_zps590803f8.jpg]

Had to remake the fittings to the oilreturn, it hit with the support bar to the turbo etc. But I made it. Its tight to get Down 2x oilreturn etc. Engine have run with both turbos on Big Grin This will start building pressure from the first touch on the trothle

Took out the rear axle to get the diff swapped. The oil had a rather fancy color :p

[Image: 20140722_180135_zps20f0cd67.jpg]

part out on the table

[Image: 20140722_201235_zps4ca2279e.jpg]

well... dont have to tell you what have made noise here Big Grin

[Image: 20140722_201301_zpsd82fd173.jpg]

Had 3.73:1 ratio but are now swapping to 3.54:1 to get it a bit longer Smile

F.R.A.S

Holset

579

07-28-2014, 03:54 AM #244

Awesome. Soon we'll need a video of the BEAST running Smile

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

07-28-2014, 03:54 AM #244

Awesome. Soon we'll need a video of the BEAST running Smile

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Gasoil

K26-2

46

07-28-2014, 01:22 PM #245

OK Stamsaas, I understand....
On fact I purchased from KM Cams some cap lash (spacers at top valve) to an engine I build for my Fiat Uno Turbo, a modified 1.6 16V engine from Bravo stroked to 1.885cc. Hydras tappets stock changed to Cat Cams mech ones.

Well, when I have my OM 606 installed I can go to dyno and check numbers with the stock intake turbo cam and another day the N/A intake cam fitted, to compare the numbers, but correct timing of N/A cam can be a mistery for me, try with stock timing.

Gasoil

07-28-2014, 01:22 PM #245

Stamsaas

GT2256V

155

08-11-2014, 05:56 PM #246

Would have been great if you could have done that! Big Grin

Since last time I have got the cooler back from Welding, and got some brackets for it.

The intake manifold is a bit big, so had to cut it Down a bit, here it is resting against radiator :p

[Image: 20140729_200313_zps7983aab6.jpg]

[Image: 20140729_200313_zps7983aab6.jpg]

There are alot extras With to turbos, everything x2 :p

So I cut down the manifold, and made a plan over the pressure gate.

[Image: 20140805_190027_zps443dcc1c.jpg]

[Image: 20140805_190027_zps443dcc1c.jpg]

And cut out the frond arces and fitted the wider universal ones

[Image: 20140810_170058_zps2e7a9caf.jpg]

[Image: 20140810_173424_zps22bfa647.jpg]

Made the tube between the turbos

[Image: 20140811_180843_zpsb29c0300.jpg]

Pressure regulator for both turbos are on, and have made the tube from turbo too cooler Smile

[Image: 20140811_200350_zps0548ffb0.jpg]

Custom all the way!

[Image: 20140811_200608_zpscb7b9db3.jpg]

Only thing that have more room now is the airfilter!

[Image: 20140811_205212_zpse3d855da.jpg]

Downpipe is started on, 3,5" is bog to get trough and down! :p

just have to make a custom angeled 4" to 3" adapter and the engine sould be ready to be started With pressure! Big Grin

Stamsaas

08-11-2014, 05:56 PM #246

Would have been great if you could have done that! Big Grin

Since last time I have got the cooler back from Welding, and got some brackets for it.

The intake manifold is a bit big, so had to cut it Down a bit, here it is resting against radiator :p

[Image: 20140729_200313_zps7983aab6.jpg]

There are alot extras With to turbos, everything x2 :p

So I cut down the manifold, and made a plan over the pressure gate.

[Image: 20140805_190027_zps443dcc1c.jpg]

And cut out the frond arces and fitted the wider universal ones

[Image: 20140810_170058_zps2e7a9caf.jpg]

[Image: 20140810_173424_zps22bfa647.jpg]

Made the tube between the turbos

[Image: 20140811_180843_zpsb29c0300.jpg]

Pressure regulator for both turbos are on, and have made the tube from turbo too cooler Smile

[Image: 20140811_200350_zps0548ffb0.jpg]

Custom all the way!

[Image: 20140811_200608_zpscb7b9db3.jpg]

Only thing that have more room now is the airfilter!

[Image: 20140811_205212_zpse3d855da.jpg]

Downpipe is started on, 3,5" is bog to get trough and down! :p

just have to make a custom angeled 4" to 3" adapter and the engine sould be ready to be started With pressure! Big Grin

F.R.A.S

Holset

579

08-15-2014, 02:33 AM #247

Ohhh damn we should have built the intake manifold in the car Sad

But just a short radius 3" and you should be good... Looks awesome anyhow.

Can't wait till we can see it run.

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

F.R.A.S

08-15-2014, 02:33 AM #247

Ohhh damn we should have built the intake manifold in the car Sad But just a short radius 3" and you should be good... Looks awesome anyhow.

Can't wait till we can see it run.

F-tune Performance [Image: V-band_om606.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Stamsaas

GT2256V

155

08-29-2014, 05:19 PM #248

Last weekend I was out on the track, and after som adjustments the compound started working! Big Grin

And mother of... as this Works Big Grin

New trackday on tueasday, will drive again then! boosting 3bar+ now, needs a gauge that goes longer :p

Stamsaas

08-29-2014, 05:19 PM #248

Last weekend I was out on the track, and after som adjustments the compound started working! Big Grin And mother of... as this Works New trackday on tueasday, will drive again then! boosting 3bar+ now, needs a gauge that goes longer :p

Turbo

Holset

489

08-30-2014, 12:54 PM #249

Going to dyno?

Turbo

08-30-2014, 12:54 PM #249

Going to dyno?

Stamsaas

GT2256V

155

08-30-2014, 02:56 PM #250

Yes, I have plan on going to a dyno this year Big Grin

can update some more, have been to little time to do this before the trackday Smile

start with a litle videoclip

Last thursday evening I had the first test run with the car this year, the day before trackday!

[Image: 20140821_212620_zps546fa3dd.jpg]

[Image: 20140821_212620_zps546fa3dd.jpg]

3,5" downpipe on its place, made up with the rest of exhaust that is 3"

[Image: 20140821_223323_zps8dede984.jpg]

Friday morning ready to hit the track, had to make a little hole in the Hood Angel

[Image: 20140822_120708_zps62e67f48.jpg]

HOLSET!

[Image: 20140822_211246_zps15e28b77.jpg]

Friday I drove some heats and tested and adjusted it a bit, but didnt got the turbos to work as good as the setup should do, but found out after last driving that I had to make some changes.

Saturday I loosened up the wastegate on the big turbo and trew in stiffer springs in the bypass wastegate

[Image: 20140823_111133_zps05ff7802.jpg]

[Image: 20140823_111133_zps05ff7802.jpg]

And this made the trick! Wink

there was no more driving on saturday, but sunday it was on it again, and it was a complete different car, starting boosting from bottom, and have 3+bar from 3000rpm too 6500rpm Big Grin

Popped a boostpipe at first lap, and another started leak after 2-3 laps on next heat, with was the last heat of the day. now it really works, and I can start give it some more fuel to get the power Big Grin

here are some pics from the weekend;

[Image: 10604598_538837002884900_843546726583537...b89593.jpg]

[Image: vacn-main-event-2014-16347-IMG_16347-1800x1400-90.jpg]

Stamsaas

08-30-2014, 02:56 PM #250

Yes, I have plan on going to a dyno this year Big Grin

can update some more, have been to little time to do this before the trackday Smile

start with a litle videoclip

Last thursday evening I had the first test run with the car this year, the day before trackday!

[Image: 20140821_212620_zps546fa3dd.jpg]

3,5" downpipe on its place, made up with the rest of exhaust that is 3"

[Image: 20140821_223323_zps8dede984.jpg]

Friday morning ready to hit the track, had to make a little hole in the Hood Angel

[Image: 20140822_120708_zps62e67f48.jpg]

HOLSET! Big Grin

[Image: 20140822_211246_zps15e28b77.jpg]

Friday I drove some heats and tested and adjusted it a bit, but didnt got the turbos to work as good as the setup should do, but found out after last driving that I had to make some changes.

Saturday I loosened up the wastegate on the big turbo and trew in stiffer springs in the bypass wastegate

[Image: 20140823_111133_zps05ff7802.jpg]

And this made the trick! Wink

there was no more driving on saturday, but sunday it was on it again, and it was a complete different car, starting boosting from bottom, and have 3+bar from 3000rpm too 6500rpm Big Grin Popped a boostpipe at first lap, and another started leak after 2-3 laps on next heat, with was the last heat of the day. now it really works, and I can start give it some more fuel to get the power

here are some pics from the weekend;

[Image: 10604598_538837002884900_843546726583537...b89593.jpg]

[Image: 629_zpsb6cc1f10.jpg]

[Image: vacn-main-event-2014-16347-IMG_16347-1800x1400-90.jpg]

Smile

Pages (7): Previous 1 … 3 4 5 6 7 Next

View a Printable Version

2 Vote(s) - 5 Average

Users browsing this thread:
3 Guest(s)