STD Other Third party vendor recommendations. Injector Service

Injector Service

Injector Service

 
  • 5 Vote(s) - 4.2 Average
 
OM616
10mm MW

572
01-28-2013, 02:40 PM #1
I sent Greazzer 5 nonstandard nozzles to put into bodies and set the pop pressure. I am very impressed with his troubleshooting ability, because he found that the nozzles worked best with a certain type of housing and developed a process to make them pop very well.

He took the challenge and won with flying colors. I highly recommend Greazzer for any type of injector service. I will be sending him all my injector work from now on!
OM616
01-28-2013, 02:40 PM #1

I sent Greazzer 5 nonstandard nozzles to put into bodies and set the pop pressure. I am very impressed with his troubleshooting ability, because he found that the nozzles worked best with a certain type of housing and developed a process to make them pop very well.

He took the challenge and won with flying colors. I highly recommend Greazzer for any type of injector service. I will be sending him all my injector work from now on!

sassparilla_kid
diesel > all other fuels

1,618
03-19-2013, 12:54 PM #2
I second that, just got some injectors back and the car seems to run a little smoother now, so I'm pretty happy.

(PS I accidentally clicked the wrong star to rate the thread, stupid smart phone, I meant to give it 5 stars)

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-19-2013, 12:54 PM #2

I second that, just got some injectors back and the car seems to run a little smoother now, so I'm pretty happy.

(PS I accidentally clicked the wrong star to rate the thread, stupid smart phone, I meant to give it 5 stars)


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

vaccin
Naturally-aspirated

21
09-02-2013, 11:13 AM #3
Can you explain in more detail the problems you were facing.

1992 300d
w211 cdi
vaccin
09-02-2013, 11:13 AM #3

Can you explain in more detail the problems you were facing.


1992 300d
w211 cdi

Captain America
Boostin' & Roostin'

2,221
09-22-2013, 10:20 PM #4
I recommend him as well!


1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag

AX15 Jeep Trans swap in progress....

Captain America
09-22-2013, 10:20 PM #4

I recommend him as well!



1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag

AX15 Jeep Trans swap in progress....

bricktron
'77 240D

174
09-27-2013, 01:38 AM #5
seconded, he is very helpful with the injectors and provides a great service.


english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




bricktron
09-27-2013, 01:38 AM #5

seconded, he is very helpful with the injectors and provides a great service.



english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




bricktron
'77 240D

174
10-05-2013, 09:41 PM #6
i second the motion!


english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




bricktron
10-05-2013, 09:41 PM #6

i second the motion!



english red rat rod 1977 240D, OM617.952 burning B99.9, iron 4-speed & 2.88 diff, 195/60/R14 on alloys, 5mph bumpers, battery in the trunk, 25mm swaybar, 4x ECE H4 lamps, double brake lamps, deleted sunroof, export zoll & california blue plates




MFSuper90
Budget Builder

1,533
11-14-2013, 08:37 AM #7
I agree. Greazzer was very nice to work with and did a fantastic job, at a very reasonably

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
11-14-2013, 08:37 AM #7

I agree. Greazzer was very nice to work with and did a fantastic job, at a very reasonably


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

atypicalguy
Holset

555
02-21-2015, 09:46 AM #8
+1. Rebuilt injectors work great.
atypicalguy
02-21-2015, 09:46 AM #8

+1. Rebuilt injectors work great.

Torkey
Dirty Diesel

220
09-14-2015, 06:36 PM #9
Sent Greeazer a set of injectors to be rebuilt.  Fantastic job!  Injectors are immaculate and the pop pressures are very tightly balanced.  Highly recommended.

79 300CD
82 300SD
Dirty Little Freaks Racing
Torkey
09-14-2015, 06:36 PM #9

Sent Greeazer a set of injectors to be rebuilt.  Fantastic job!  Injectors are immaculate and the pop pressures are very tightly balanced.  Highly recommended.


79 300CD
82 300SD
Dirty Little Freaks Racing

 
  • 5 Vote(s) - 4.2 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)