how much can it take(om605 manual)

0 Vote(s) - 0 Average

Holset

600

06-20-2012, 04:51 PM #1

hi, i am currently running 385bhp on om605 manual gearbox and standard diff.(w202)
I am making some big changes so does anyone know how much power and torque the gearbox and diff can take?

This post was last modified: 06-20-2012, 04:52 PM by mantahead.

mantahead

06-20-2012, 04:51 PM #1

hi, i am currently running 385bhp on om605 manual gearbox and standard diff.(w202)
I am making some big changes so does anyone know how much power and torque the gearbox and diff can take?

mantahead

Holset

600

08-12-2012, 06:39 AM #2

what manual gearbox does one use on a om606 with over 500bhp and 900nm torque?
bmw gearboxes seem strong but is there any mercedes boxes will take that abuse?

mantahead

08-12-2012, 06:39 AM #2

what manual gearbox does one use on a om606 with over 500bhp and 900nm torque?
bmw gearboxes seem strong but is there any mercedes boxes will take that abuse?

peter

Naturally-aspirated

17

08-12-2012, 11:47 AM #3

(08-12-2012, 06:39 AM)mantahead what manual gearbox does one use on a om606 with over 500bhp and 900nm torque?
bmw gearboxes seem strong but is there any mercedes boxes will take that abuse?

as i know you can use the gearboxes of E220 and E270 cdi.
you can get a tremec gearbox on ebay, this on is rated for 900Nm, but you will need an adapter

This post was last modified: 08-15-2012, 11:40 AM by peter.

peter

08-12-2012, 11:47 AM #3

(08-12-2012, 06:39 AM)mantahead what manual gearbox does one use on a om606 with over 500bhp and 900nm torque?
bmw gearboxes seem strong but is there any mercedes boxes will take that abuse?

as i know you can use the gearboxes of E220 and E270 cdi.
you can get a tremec gearbox on ebay, this on is rated for 900Nm, but you will need an adapter

aaa

GT2256V

913

08-12-2012, 12:53 PM #4

I'd avoid mb manual boxes.

aaa

08-12-2012, 12:53 PM #4

I'd avoid mb manual boxes.

mantahead

Holset

600

08-12-2012, 04:43 PM #5

hi,
anyone know how strong they are and are they a straight bolt on to om606?
its a tremec from a sangyong musso.

http://www.ebay.co.uk/itm/DAEWOO-MUSSO-T...4ab0fb84be

This post was last modified: 08-12-2012, 05:24 PM by mantahead.

mantahead

08-12-2012, 04:43 PM #5

hi,
anyone know how strong they are and are they a straight bolt on to om606?
its a tremec from a sangyong musso.

http://www.ebay.co.uk/itm/DAEWOO-MUSSO-T...4ab0fb84be

benzguy300

K26-2

33

08-12-2012, 09:02 PM #6

(08-12-2012, 12:53 PM)aaa I'd avoid mb manual boxes.

Why?

benzguy300

08-12-2012, 09:02 PM #6

(08-12-2012, 12:53 PM)aaa I'd avoid mb manual boxes.

Why?

aaa

GT2256V

913

08-13-2012, 12:56 AM #7

(08-12-2012, 09:02 PM)benzguy300
(08-12-2012, 12:53 PM)aaa I'd avoid mb manual boxes.

Why?

Because they'd break under 900nm.

aaa

08-13-2012, 12:56 AM #7

(08-12-2012, 09:02 PM)benzguy300
(08-12-2012, 12:53 PM)aaa I'd avoid mb manual boxes.

Why?

Because they'd break under 900nm.

mantahead

Holset

600

08-14-2012, 05:54 AM #8

hi,
can the transfer box be removed from the rear of the box and just fit a flange for the driveshaft?

mantahead

08-14-2012, 05:54 AM #8

hi,
can the transfer box be removed from the rear of the box and just fit a flange for the driveshaft?

peter

Naturally-aspirated

17

08-15-2012, 11:35 AM #9

visit the homepage. i think you will find answers you need. http://www.tremec.com/performance

This post was last modified: 08-15-2012, 11:40 AM by peter.

peter

08-15-2012, 11:35 AM #9

visit the homepage. i think you will find answers you need. http://www.tremec.com/performance

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)