08-01-2017, 02:49 PM
#265
(07-04-2017, 04:20 PM)ross Ole,
Is the controller capable of controlling boost on a compound setup?
Hi yes it can be used to control Compound, but there is so many ways to control them.
I have in total 4 PWM output that can be used to control vaccumvalve.
they can be controlled from 2 different boost sensors, RPM, Km/h, TPS.
This is output 1 (Not shown im PWM mode but should give an idea how it works.)
https://www.youtube.com/watch?v=ULEGavGRavs
Also put in extra picture's on the Boost page on my homepage, scroll down to the end of this page.
Here you see the 4 picture showing witch input is used for the 4 output.
http://ofgear.dk/userguide/boostcontrol.html
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)