Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gearbox Controller 722.6 ver 2
mower16 Offline
Naturally-aspirated
*


Posts: 2
Joined: Apr 2016
Location: australia
RE: Gearbox Controller 722.6 ver 2
Thank you for your quick response. I must add I am loving the controller keep up the good work.
09-05-2016, 08:40 PM
Find Reply
ho55 Offline
TA 0301
**


Posts: 68
Joined: May 2014
Location: Europe
RE: Gearbox Controller 722.6 ver 2
Does anyone have proven settings, file if possible?
Also what do people change for the Winter mode?
09-15-2016, 04:08 AM
Find Reply
jupel Offline
Naturally-aspirated
*


Posts: 10
Joined: Aug 2015
Location: Moscow Russia
RE: Gearbox Controller 722.6 ver 2
Hi Ole! Is it possible, to take signal from abs on old revision controller? I try to make it, but it work unstable, and as i see the signal from abs sensor must be divided by 3? Can you help to solve it?
02-18-2017, 08:37 AM
Find Reply
olefejer Offline
GT2559V
***


Posts: 193
Joined: Nov 2009
Location: Denmark
RE: Gearbox Controller 722.6 ver 2
(02-18-2017, 08:37 AM)jupel Wrote: Hi Ole! Is it possible, to take signal from abs on old revision controller? I try to make it, but it work unstable, and as i see the signal from abs sensor must be divided by 3? Can you help to solve it?

Hi 
Yes no-matter how old the controller is you can connect it to ABS, sensor 
But correct the newest ones has a real automotive ABS sensor chip that is used for both external Speed and RPM, that is more immune to noise then the older type. 

If the speed show 3 times to much, you goto
"Setup Parameters" -> "External speed %"  standart is 100 set it to 33 
Then test and see if it fits,
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
02-18-2017, 12:07 PM
Find Reply
jupel Offline
Naturally-aspirated
*


Posts: 10
Joined: Aug 2015
Location: Moscow Russia
RE: Gearbox Controller 722.6 ver 2
(02-18-2017, 12:07 PM)olefejer Wrote:
(02-18-2017, 08:37 AM)jupel Wrote: Hi Ole! Is it possible, to take signal from abs on old revision controller? I try to make it, but it work unstable, and as i see the signal from abs sensor must be divided by 3? Can you help to solve it?

Hi 
Yes no-matter how old the controller is you can connect it to ABS, sensor 
But correct the newest ones has a real automotive ABS sensor chip that is used for both external Speed and RPM, that is more immune to noise then the older type. 

If the speed show 3 times to much, you goto
"Setup Parameters" -> "External speed %"  standart is 100 set it to 33 
Then test and see if it fits,

thanks, i've got a lost connection, and fix it Smile
and one more question: how about firmware update for old version with lcd displays and led gear indicator? it would be nice to have voltage relate firmness. Because i'm not want to have oled gear indicator in old car, in w124 is bad look. and install display in ashtray, look nice.
and how about trans lock setting, i want to set speed for each gear separately, is it possible?
02-21-2017, 02:19 PM
Find Reply
olefejer Offline
GT2559V
***


Posts: 193
Joined: Nov 2009
Location: Denmark
RE: Gearbox Controller 722.6 ver 2
(02-21-2017, 02:19 PM)jupel Wrote:
(02-18-2017, 12:07 PM)olefejer Wrote:
(02-18-2017, 08:37 AM)jupel Wrote: Hi Ole! Is it possible, to take signal from abs on old revision controller? I try to make it, but it work unstable, and as i see the signal from abs sensor must be divided by 3? Can you help to solve it?

Hi 
Yes no-matter how old the controller is you can connect it to ABS, sensor 
But correct the newest ones has a real automotive ABS sensor chip that is used for both external Speed and RPM, that is more immune to noise then the older type. 

If the speed show 3 times to much, you goto
"Setup Parameters" -> "External speed %"  standart is 100 set it to 33 
Then test and see if it fits,

thanks, i've got a lost connection, and fix it Smile
and one more question: how about firmware update for old version with lcd displays and led gear indicator? it would be nice to have voltage relate firmness. Because i'm not  want to have oled gear indicator in old car, in w124 is bad look. and install display in ashtray, look nice.
and how about trans lock setting, i want to set speed for each gear separately, is it possible?
Hi 
If you want to keep the 4 Line older style display, i do not do software update for that anymore. 
Well voltage related firmness is only relevant if you voltage is different, from time to time and in a normal car that is running you have 13-14 Volt at controller.
But is is an advantage for me when i ship it out, to many different cars, nomatter if it has 12V or 14V it will as default shift almost the same, way. 
Trans lock setting is like this you set the lockup speed you want in 5 gear, then that correspont to a specific RPM that is used in any other gear if you have set the controller to lockup in 2-4 gear also. So sorry no it is not possible to have different Lockup RPM in different gear.
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
02-22-2017, 01:16 PM
Find Reply
Fishman Offline
TA 0301
**


Posts: 68
Joined: Apr 2015
Location: Nederland
RE: Gearbox Controller 722.6 ver 2
I just installed the Ole controller. Easy job. There is a ext rpm connection on the controller. Can that be used to control the rpm guage?
05-18-2017, 05:01 AM
Find Reply
hents99 Offline
GT2256V
***


Posts: 141
Joined: Nov 2014
Location: Estonia
RE: Gearbox Controller 722.6 ver 2
It`s for speedometer.
Tachometer signal output would be very useful. Ole, think about it.
------------------------------------------------------------------------
http://www.elbe.ee - MB performance parts. 
W201, C126, W463 STD, W140
05-18-2017, 05:32 AM
Website Find Reply
Fishman Offline
TA 0301
**


Posts: 68
Joined: Apr 2015
Location: Nederland
RE: Gearbox Controller 722.6 ver 2
There is an other speedo out connection.
05-18-2017, 05:33 AM
Find Reply
olefejer Offline
GT2559V
***


Posts: 193
Joined: Nov 2009
Location: Denmark
RE: Gearbox Controller 722.6 ver 2
Hi 
Just to make things clear 

I have Input to TCU

EXT Rpm is signal from Flywheel sensor to give TCU controller correct Engine RPM all the time. 
EXT Speed is signal from eventual ABS sensor or any other speed sensor to give speed of the car. to the TCU controller
http://ofgear.dk/userguide/rpmkmin.html

Output 
"Tacho out"  is a failure by me, it should have said Speedo out, as it can drive a speedometer, Sorry for that confusion 
http://ofgear.dk/userguide/speedoout.html


This typo is corrected on new controllers
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
05-19-2017, 04:14 PM
Find Reply
Fishman Offline
TA 0301
**


Posts: 68
Joined: Apr 2015
Location: Nederland
RE: Gearbox Controller 722.6 ver 2
Again, THANKS!
Installation of the controller was very straight forward. The display housing looks great!
[Image: 20170517_1704481_zps55wci9e6.jpg]

(05-19-2017, 04:14 PM)olefejer Wrote: Hi 
Just to make things clear 

I have Input to TCU

EXT Rpm is signal from Flywheel sensor to give TCU controller correct Engine RPM all the time. 
EXT Speed is signal from eventual ABS sensor or any other speed sensor to give speed of the car. to the TCU controller
http://ofgear.dk/userguide/rpmkmin.html

Output 
"Tacho out"  is a failure by me, it should have said Speedo out, as it can drive a speedometer, Sorry for that confusion 
http://ofgear.dk/userguide/speedoout.html


This typo is corrected on new controllers
05-20-2017, 02:19 AM
Find Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)