03-12-2016, 12:23 PM
#226
(03-11-2016, 08:15 AM)ross Ole, is there a way of making the the Holset canbus VGT work with the Gear indicator? I know your manual says it won't work.
I have got the new 2.4" OLED display and CANBUS control of the holset to work.
The problem was that they uses the same SPI bus, and i have to do some rewire on the PCB to get it to work.
Well i would be able to do a guide how to modify old controllers. if not scared of solder a wire,
but i still do some testing on the holset controller, i have a turbo width the controller on my test bench. and can control it via CANBUS
Well work is still going on regarding Holset.
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)