Gearbox Controller 722.6 ver 2
Gearbox Controller 722.6 ver 2
(10-29-2015, 02:50 PM)erx(10-29-2015, 02:09 PM)olefejer(10-28-2015, 03:05 PM)erx It is shifting fine, I was just wondering that it would be great to see numbers above 2,99 too.What i mean is
If I adjust shift firmness at 100% TPS higher than 0 on menu then accelerating with 3bar boost it is not making shifts any harder because it is shifting as hard as possible anyway?
If TPS is 100% and Boost is 2 bar then i tell the Gearbox to shift as hard as possible.
Yes shift hardness is depending on both TPS and Boost, that is a big advantage when people use big slow spooling turbos.
it gives better comfort at low load.
I understand, I try to explain better what I wanted to ask.
If I go to SHIFT FIRMNESS > 1->2 100% Load and it has 0% value. If I change this 100% Load firmness value lets say from 0% to 10% will it make shifts even harder or is it shifting as hard as possible anyway when I have 3bar boost and full throttle?
Like on this picture but instead of 30% I mean 100% Load and Change:0% to 10%.
If I change this value on 20% and 30% Load I can feel the difference but not sure on 100% Load.
(10-29-2015, 02:50 PM)erx(10-29-2015, 02:09 PM)olefejer(10-28-2015, 03:05 PM)erx It is shifting fine, I was just wondering that it would be great to see numbers above 2,99 too.What i mean is
If I adjust shift firmness at 100% TPS higher than 0 on menu then accelerating with 3bar boost it is not making shifts any harder because it is shifting as hard as possible anyway?
If TPS is 100% and Boost is 2 bar then i tell the Gearbox to shift as hard as possible.
Yes shift hardness is depending on both TPS and Boost, that is a big advantage when people use big slow spooling turbos.
it gives better comfort at low load.
I understand, I try to explain better what I wanted to ask.
If I go to SHIFT FIRMNESS > 1->2 100% Load and it has 0% value. If I change this 100% Load firmness value lets say from 0% to 10% will it make shifts even harder or is it shifting as hard as possible anyway when I have 3bar boost and full throttle?
Like on this picture but instead of 30% I mean 100% Load and Change:0% to 10%.
If I change this value on 20% and 30% Load I can feel the difference but not sure on 100% Load.