Gearbox Controller 722.6 ver 2
Gearbox Controller 722.6 ver 2
(10-29-2015, 02:09 PM)olefejer(10-28-2015, 03:05 PM)erxWhat i mean is(10-26-2015, 12:48 PM)olefejer You are running some hardcore engine ;-)
but it is no problem at 2 bar boost and 100% TPS the Controller shift as hard as possible.
And the sensor would survive 4 bar boost but just not show it.
It is shifting fine, I was just wondering that it would be great to see numbers above 2,99 too.
If I adjust shift firmness at 100% TPS higher than 0 on menu then accelerating with 3bar boost it is not making shifts any harder because it is shifting as hard as possible anyway?
If TPS is 100% and Boost is 2 bar then i tell the Gearbox to shift as hard as possible.
Yes shift hardness is depending on both TPS and Boost, that is a big advantage when people use big slow spooling turbos.
it gives better comfort at low load.
(10-29-2015, 02:09 PM)olefejer(10-28-2015, 03:05 PM)erxWhat i mean is(10-26-2015, 12:48 PM)olefejer You are running some hardcore engine ;-)
but it is no problem at 2 bar boost and 100% TPS the Controller shift as hard as possible.
And the sensor would survive 4 bar boost but just not show it.
It is shifting fine, I was just wondering that it would be great to see numbers above 2,99 too.
If I adjust shift firmness at 100% TPS higher than 0 on menu then accelerating with 3bar boost it is not making shifts any harder because it is shifting as hard as possible anyway?
If TPS is 100% and Boost is 2 bar then i tell the Gearbox to shift as hard as possible.
Yes shift hardness is depending on both TPS and Boost, that is a big advantage when people use big slow spooling turbos.
it gives better comfort at low load.