Gearbox Controller 722.6 ver 2
Gearbox Controller 722.6 ver 2
(08-14-2015, 04:27 AM)jupel Ole, i had install your device, and have some questions.
i had box 5wa580 at om603 wiht another bellhousing. this box have more friction disks, because of this it need low pressure to manage shifting gears. so I had have change parameters "general firmness" - line adjust from "-2" to "0" or higher, and gears shifting 1-2-3 and suddenly first again when speed around 60 km/h and speedometer jump to 100-120 even the car was stopped. it need to restart controller. the same case happened if i put selector from "D" to "N" and back again on running car - the same magic to speedo and inappropriate behavior of the box.
Is it pwm output problem? or bug
and the same promblem if i try to make downshifting 2-1 more smooth. I change coeff firm/load 2-1 to "-6" or lower, and when the car was stopped, no gear is on.
(08-14-2015, 04:27 AM)jupel Ole, i had install your device, and have some questions.
i had box 5wa580 at om603 wiht another bellhousing. this box have more friction disks, because of this it need low pressure to manage shifting gears. so I had have change parameters "general firmness" - line adjust from "-2" to "0" or higher, and gears shifting 1-2-3 and suddenly first again when speed around 60 km/h and speedometer jump to 100-120 even the car was stopped. it need to restart controller. the same case happened if i put selector from "D" to "N" and back again on running car - the same magic to speedo and inappropriate behavior of the box.
Is it pwm output problem? or bug
and the same promblem if i try to make downshifting 2-1 more smooth. I change coeff firm/load 2-1 to "-6" or lower, and when the car was stopped, no gear is on.