Gearbox Controller 722.6 ver 2
Gearbox Controller 722.6 ver 2
More questions
I was reading your document on the controller and the part related to the gear lever,
"Gear Lever and plug (it has to be the one with a “1” see red squre on picture)
And the plug is a 10 pin, and have 8 wire out, thats the one we need
If you are in the Marked for a GearLever, be aware that the GB (RHD), ones is also mirrord, compared to the LHD ones, an other thing is that the one from W210 is longer then the W202, and R129 it is the short that fits the W124 and older G class, "
So, if I find a gear lever set up from a W202 or R129 with the "1" it will bolt in to my W124?
Secondly,
The 722.6 is an electronic out put for the speed, I believe the 400E uses an electronic spedo, so is there a way to make it work with the 722.6?
Lastly,
The throttle position sensor from a w210 is needed for the conversion, how did you implement that into your car? I am curious to see how it receives throttle position and then the injection pump also gets input from the cable.