STD Tuning Engine C111-IId and C111-III details from Mercedes

C111-IId and C111-III details from Mercedes

C111-IId and C111-III details from Mercedes

 
  • 6 Vote(s) - 4 Average
 
Pages (2): Previous 1 2
Volker407
naturally aspirated

157
01-22-2014, 03:11 PM #51
some more pictures from the meeting at Schloß Dyck

http://www.nast-sonderfahrzeuge.de/MB-Ex...p?id=37218

http://www.formfreu.de/2010/08/08/merced...loss-dyck/

Can somebody confirm or correct me that the turbocharger looks like a Garrett T04B?
What size would that turbo be compared to a Holset for example?


Gruß
Volker
Volker407
01-22-2014, 03:11 PM #51

some more pictures from the meeting at Schloß Dyck

http://www.nast-sonderfahrzeuge.de/MB-Ex...p?id=37218

http://www.formfreu.de/2010/08/08/merced...loss-dyck/

Can somebody confirm or correct me that the turbocharger looks like a Garrett T04B?
What size would that turbo be compared to a Holset for example?


Gruß
Volker

tjts1
GT2256V

125
01-22-2014, 03:51 PM #52
Can somebody translate?
[Image: dsc_0912mba.jpg]

[Image: 208104.png]
tjts1
01-22-2014, 03:51 PM #52

Can somebody translate?
[Image: dsc_0912mba.jpg]


[Image: 208104.png]

Tito
Holset

354
01-22-2014, 05:30 PM #53
After full load, don't turn the engine off immediately.

Probably to cool the turbo of course...

Edit: left 2 buttons say pump L and pump R. Kraftstoff means fuel. So some kind of fuel supply. Zuending I don't know for sure but i thought it was ignition. Starter, well seems obvious. And licht mean lights.

I think the white card is the calculated speed. 3,4,5 Gg are probably the gears (in german = gang)? and the engine RPM on top. Reifen translates to tires and the size is 215/70VR15

HA = hinterachse meaning rear axle (differential). That would be the final drive ratio = 3.07
This post was last modified: 01-22-2014, 05:44 PM by Tito.
Tito
01-22-2014, 05:30 PM #53

After full load, don't turn the engine off immediately.

Probably to cool the turbo of course...

Edit: left 2 buttons say pump L and pump R. Kraftstoff means fuel. So some kind of fuel supply. Zuending I don't know for sure but i thought it was ignition. Starter, well seems obvious. And licht mean lights.

I think the white card is the calculated speed. 3,4,5 Gg are probably the gears (in german = gang)? and the engine RPM on top. Reifen translates to tires and the size is 215/70VR15

HA = hinterachse meaning rear axle (differential). That would be the final drive ratio = 3.07

winmutt
bitbanger

3,468
01-22-2014, 06:34 PM #54
Ditto on what Tito said.

How in the world can they get 170mph out of that gearing?

http://wahiduddin.net/calc/calc_speed_rpm.htm says 146.6MPH assuming 5th OD is 0.83 (normal 5th right). According to the calculator their 5th gear is 0.71!!!!

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
01-22-2014, 06:34 PM #54

Ditto on what Tito said.

How in the world can they get 170mph out of that gearing?

http://wahiduddin.net/calc/calc_speed_rpm.htm says 146.6MPH assuming 5th OD is 0.83 (normal 5th right). According to the calculator their 5th gear is 0.71!!!!


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Volker407
naturally aspirated

157
12-22-2014, 10:03 AM #55
Look out for news, due to a press release 2015 will be "The year of the C111" with several presentations and a special C111 exhibition at the Mercedes Museum in Stuttgart.

V8
https://www.youtube.com/watch?v=6J1eZ65SgkE

original OM617A sound
https://www.youtube.com/watch?v=KR8n-8W2bOM


Gruß
Volker
This post was last modified: 12-22-2014, 10:13 AM by Volker407.
Volker407
12-22-2014, 10:03 AM #55

Look out for news, due to a press release 2015 will be "The year of the C111" with several presentations and a special C111 exhibition at the Mercedes Museum in Stuttgart.

V8
https://www.youtube.com/watch?v=6J1eZ65SgkE

original OM617A sound
https://www.youtube.com/watch?v=KR8n-8W2bOM


Gruß
Volker

Greazzer
Superturbo

1,277
12-22-2014, 12:15 PM #56
Great Stuff !

Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Greazzer
12-22-2014, 12:15 PM #56

Great Stuff !


Ninth Year Anniversary with STD on 1-9-2020

visit:  www.dieselfuelinjector.guru

Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.

RED W123 - left Germany as 240D in 1982.  Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...

Volker407
naturally aspirated

157
11-12-2015, 05:08 PM #57
A few days ago I have been to the Museum



   

   

   

   



Gruß
Volker
Volker407
11-12-2015, 05:08 PM #57

A few days ago I have been to the Museum



   

   

   

   



Gruß
Volker

NZScott
HX30W 73/44mm

398
11-13-2015, 01:44 AM #58
Woooow, nice. I'm a little confused as to which engine this is though. Going by the lack of oil filter housing the block is a 617.910? Which would've been used for the 1976 trials presumably, but the info panel says 1980? The other pics of the C111-IID have the normal filter housings. I see the head has the SLS drive blocked off, did the W115s even have SLS?

Jeez this raises more questions than it answers Tongue

PS- didn't happen to see a part number on that vacuum pump block off plate? lol
This post was last modified: 11-13-2015, 01:46 AM by NZScott.


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
11-13-2015, 01:44 AM #58

Woooow, nice. I'm a little confused as to which engine this is though. Going by the lack of oil filter housing the block is a 617.910? Which would've been used for the 1976 trials presumably, but the info panel says 1980? The other pics of the C111-IID have the normal filter housings. I see the head has the SLS drive blocked off, did the W115s even have SLS?

Jeez this raises more questions than it answers Tongue

PS- didn't happen to see a part number on that vacuum pump block off plate? lol



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




Volker407
naturally aspirated

157
11-22-2015, 06:02 AM #59
(11-13-2015, 01:44 AM)NZScott Woooow, nice. I'm a little confused as to which engine this is though. Going by the lack of oil filter housing the block is a 617.910? Which would've been used for the 1976 trials presumably, but the info panel says 1980? The other pics of the C111-IID have the normal filter housings. I see the head has the SLS drive blocked off, did the W115s even have SLS?

Jeez this raises more questions than it answers Tongue

PS- didn't happen to see a part number on that vacuum pump block off plate? lol

They basically took the engine from a W115 240 3.0D

The oil filter connection is below the injection pump. On the old pictures the oil filter is not the stock one.
Keep in mind that there were at least 3 engine versions. The "C111 orange Diesel 1" , "C111 orange Diesel 2" and the later "silver Diesel streamliner".

The cast number on the engine block indicates, that those engine blocks were  an extra casting with some missing holes so they could drill the holes later were they need them. But still a standard OM617 block.

They then did add several holes for the oil filter, piston cooling and so on. The engine also did get stronger rods, different crankshaft, special turbo pistons, bigger piston pins,....  Those upgrades were always related to the naturally aspirated  engine from the W115.
So the later turbo engine which you could buy in every car is very similar to the engine that drove  the records. There are some small changes like the record car had sodium filled inlet and outlet valves. The later production engine only has the outlet valves filled with sodium.

Oh and forget about what the info panels say. They were written by marketing guys....

The SLS drive on the head is  probably just a "power take-off" in reserve.  Maybe they would have needed an additional water pump, oil pump or whatever. On such a car you want to keep all possibilities.

Sorry, no part number on the block off plate ;-)

Gruß
Volker
Volker407
11-22-2015, 06:02 AM #59

(11-13-2015, 01:44 AM)NZScott Woooow, nice. I'm a little confused as to which engine this is though. Going by the lack of oil filter housing the block is a 617.910? Which would've been used for the 1976 trials presumably, but the info panel says 1980? The other pics of the C111-IID have the normal filter housings. I see the head has the SLS drive blocked off, did the W115s even have SLS?

Jeez this raises more questions than it answers Tongue

PS- didn't happen to see a part number on that vacuum pump block off plate? lol

They basically took the engine from a W115 240 3.0D

The oil filter connection is below the injection pump. On the old pictures the oil filter is not the stock one.
Keep in mind that there were at least 3 engine versions. The "C111 orange Diesel 1" , "C111 orange Diesel 2" and the later "silver Diesel streamliner".

The cast number on the engine block indicates, that those engine blocks were  an extra casting with some missing holes so they could drill the holes later were they need them. But still a standard OM617 block.

They then did add several holes for the oil filter, piston cooling and so on. The engine also did get stronger rods, different crankshaft, special turbo pistons, bigger piston pins,....  Those upgrades were always related to the naturally aspirated  engine from the W115.
So the later turbo engine which you could buy in every car is very similar to the engine that drove  the records. There are some small changes like the record car had sodium filled inlet and outlet valves. The later production engine only has the outlet valves filled with sodium.

Oh and forget about what the info panels say. They were written by marketing guys....

The SLS drive on the head is  probably just a "power take-off" in reserve.  Maybe they would have needed an additional water pump, oil pump or whatever. On such a car you want to keep all possibilities.

Sorry, no part number on the block off plate ;-)

Gruß
Volker

NZScott
HX30W 73/44mm

398
11-23-2015, 12:25 AM #60
I checked some pics and indeed the oil filter on the earlier cars was a remote one, but still the cartridge style.
I was not aware of 3 versions of the engine, thought there was the IID (orange) of 1976 (190hp) then the silver IIID of '78 (230hp)?
I notice too the head has the pencil glow plugs so maybe the head was changed, would explain the SLS drive blocked off. Very interested in the mods you mention, in the middle of chucking a holset on a 617.912 for 150hp or so you see Tongue

Well what a shame Tongue Those vacuum cover plates seem so common in Europe.


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
11-23-2015, 12:25 AM #60

I checked some pics and indeed the oil filter on the earlier cars was a remote one, but still the cartridge style.
I was not aware of 3 versions of the engine, thought there was the IID (orange) of 1976 (190hp) then the silver IIID of '78 (230hp)?
I notice too the head has the pencil glow plugs so maybe the head was changed, would explain the SLS drive blocked off. Very interested in the mods you mention, in the middle of chucking a holset on a 617.912 for 150hp or so you see Tongue

Well what a shame Tongue Those vacuum cover plates seem so common in Europe.



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




Pages (2): Previous 1 2
 
  • 6 Vote(s) - 4 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)