STD Maintenance General What relays are missing?

What relays are missing?

What relays are missing?

 
  • 0 Vote(s) - 0 Average
 
fha772
K26-2

46
04-26-2012, 11:55 AM #1
Hi all,

Just a quick question, while stripping out the interior of my W123 280E, I've noticed there's a couple of relays missing. 1 is located directly in front of the gearstick, the other is approximately under the ashtray.
What should be in these locations?

Here's a picture to show what I mean...
[Image: 2d1a73df.jpg]

Cheers Frank.
fha772
04-26-2012, 11:55 AM #1

Hi all,

Just a quick question, while stripping out the interior of my W123 280E, I've noticed there's a couple of relays missing. 1 is located directly in front of the gearstick, the other is approximately under the ashtray.
What should be in these locations?

Here's a picture to show what I mean...
[Image: 2d1a73df.jpg]

Cheers Frank.

bmwpowere36m3
K26-2

29
04-26-2012, 06:18 PM #2
Those aren't relays, but harness disconnects.

'80 MB 300CD, "Beauty"

&

'98 BMW M3, The BEAST
bmwpowere36m3
04-26-2012, 06:18 PM #2

Those aren't relays, but harness disconnects.


'80 MB 300CD, "Beauty"

&

'98 BMW M3, The BEAST

willbhere4u
Six in a row make her go!

2,507
04-26-2012, 09:50 PM #3
one might be the reverse lights???

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-26-2012, 09:50 PM #3

one might be the reverse lights???


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

fha772
K26-2

46
05-02-2012, 07:50 AM #4
WOOHOO!!! I've figured it out, the plug set at 90 degrees, in front of the gearstick is for the flasher unit, and the plug that's under the ashtray area is where the electric window loom plugs in!!!
fha772
05-02-2012, 07:50 AM #4

WOOHOO!!! I've figured it out, the plug set at 90 degrees, in front of the gearstick is for the flasher unit, and the plug that's under the ashtray area is where the electric window loom plugs in!!!

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)