STD Tuning Suspension Rear hydraulic system

Rear hydraulic system

Rear hydraulic system

 
  • 0 Vote(s) - 0 Average
 
Robert_UAH
K26-2

42
04-17-2012, 01:24 PM #1
What is required to convert from the rear hydraulic suspension on a W123?
Robert_UAH
04-17-2012, 01:24 PM #1

What is required to convert from the rear hydraulic suspension on a W123?

Simpler=Better
PORTED HEAD

2,127
04-17-2012, 01:58 PM #2
You will need to weld in some kind of spring perches. I don't know if the SLS has springs or not from the factory

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
04-17-2012, 01:58 PM #2

You will need to weld in some kind of spring perches. I don't know if the SLS has springs or not from the factory


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

aaa
GT2256V

913
04-17-2012, 03:56 PM #3
You need replacement springs and shocks. The stock springs will sag without the hydraulics supporting them.

http://slsconversion.com/
aaa
04-17-2012, 03:56 PM #3

You need replacement springs and shocks. The stock springs will sag without the hydraulics supporting them.

http://slsconversion.com/

Robert_UAH
K26-2

42
04-19-2012, 08:58 AM #4
So I just need some springs and Bilstein HD shocks. No need for different spring perches or anything?
Robert_UAH
04-19-2012, 08:58 AM #4

So I just need some springs and Bilstein HD shocks. No need for different spring perches or anything?

propigskinSLS
Naturally-aspirated

17
06-05-2012, 04:41 AM #5
(04-19-2012, 08:58 AM)Robert_UAH So I just need some springs and Bilstein HD shocks. No need for different spring perches or anything?

No spring purch change or modifications required:

You can order my springs at www.slsconversion.com

I also sell stock type shocks that bolt right in and a sls pump block off plate.

You can use Bilstein shocks also off a w123 300D sedan that bolt right in if you want the best shocks....

Thanks,
Erik
This post was last modified: 06-05-2012, 04:41 AM by propigskinSLS.
propigskinSLS
06-05-2012, 04:41 AM #5

(04-19-2012, 08:58 AM)Robert_UAH So I just need some springs and Bilstein HD shocks. No need for different spring perches or anything?

No spring purch change or modifications required:

You can order my springs at www.slsconversion.com

I also sell stock type shocks that bolt right in and a sls pump block off plate.

You can use Bilstein shocks also off a w123 300D sedan that bolt right in if you want the best shocks....

Thanks,
Erik

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)