84 Mercedes 300d, turbo+4 speed

View a Printable Version

0 Vote(s) - 0 Average

doosky

Naturally-aspirated

5

03-07-2012, 11:03 AM #1

, I can now pull out onto the road with confidence, and I don't need to downshift when I'm passing.

I'm impressed with some of the w123's I've seen here, and would just like to pick everyone's brain as I fix her up. My goals are to increase mileage and convert this car to run on wvo with a 2 tank setup, and if I get some extra ponies along the way that'd be nice too, but you won't see me getting a vnt turbo anytime soon.

I've considered biodiesel but opted for veggie since I live in an apartment and don't have a place to put a processor, it's going to be bad enough, doing the filtering and dewatering on my porch, I don't need to throw lye and methanol into the mix.

So what I'm working on right now is parting out the Euro Benz, I have nice blue MB-Tex interior, I have the complete OM617, ip, brakes, axle, my doors are good, lots of stuff that I plan to start posting on here. One question, does my turbo Benz (84 om617a auto) have a different axle ratio than my na Benz (85 om617 4sp)?

Here's the 84 as I bought her

[Image: 100_0483.jpg]

Here are pics of the Euro Benz

[Image: DSC_0668.jpg]

And here's after the accident Sad

This post was last modified: 03-07-2012, 11:41 AM by doosky.

doosky

03-07-2012, 11:03 AM #1

Hi, my name is Dave and I just purchased an 84 300d that I'd like to convert to run on wvo. I had bought an 85 euro 300d that ad the Om617(NA) paired up to a 4 speed manual. Unfortunately I totaled that car about a month ago, those crumple zones definitely did their job lol. I rear-ended a car and then was rear-ended immediately after. It's a shame since the car was in pristine condition, no rust, nice white paint, Euro headlights, but what's done is done.

Fortunately my buddy was able to find an 84 300d, this one, is an American 300d, w/ the OM617a(turbo) motor, this car is in great shape, no rust, just faded paint a crack in the windshield, a "hot air" intake that needs to get replaced with the stocker, and some vacuum leaks to seal up (car won't shut off w/o stalling out). I had the 4 spd swapped into the 84, and this car is just a completely different animal Big Grin , I can now pull out onto the road with confidence, and I don't need to downshift when I'm passing.

I'm impressed with some of the w123's I've seen here, and would just like to pick everyone's brain as I fix her up. My goals are to increase mileage and convert this car to run on wvo with a 2 tank setup, and if I get some extra ponies along the way that'd be nice too, but you won't see me getting a vnt turbo anytime soon.

I've considered biodiesel but opted for veggie since I live in an apartment and don't have a place to put a processor, it's going to be bad enough, doing the filtering and dewatering on my porch, I don't need to throw lye and methanol into the mix.

So what I'm working on right now is parting out the Euro Benz, I have nice blue MB-Tex interior, I have the complete OM617, ip, brakes, axle, my doors are good, lots of stuff that I plan to start posting on here. One question, does my turbo Benz (84 om617a auto) have a different axle ratio than my na Benz (85 om617 4sp)?

Here's the 84 as I bought her

[Image: 100_0483.jpg]

Here are pics of the Euro Benz

[Image: DSC_0668.jpg]

And here's after the accident Sad

sassparilla_kid

diesel > all other fuels

1,618

03-07-2012, 01:26 PM #2

Its just a flesh wound! But seriously that does suck though, Euro cars are awesome

Anyway about your list of stuff to do, valve adjustment and injection pump timing will surely help with mileage and power. When I adjusted the IP timing in my car I got like 8 more mpg's, unfortunately its out of adjustment again and I've been too lazy/busy to re-do it properly.

Also I have a two tank WVO setup if you have any questions

Anyway, good luck!!

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

sassparilla_kid

03-07-2012, 01:26 PM #2

Purplecomputer

Slowness 220D

897

03-07-2012, 05:59 PM #3

I would take the 4spd out of the totaled car and slap it on the turbo motor. Should be real fun to drive. Also it looks like you can salvage the front euro bumper.

This post was last modified: 03-07-2012, 06:00 PM by Purplecomputer.

Purplecomputer

03-07-2012, 05:59 PM #3

I would take the 4spd out of the totaled car and slap it on the turbo motor. Should be real fun to drive. Also it looks like you can salvage the front euro bumper.

aaa

GT2256V

913

03-07-2012, 07:58 PM #4

(03-07-2012, 11:03 AM)doosky One question, does my turbo Benz (84 om617a auto) have a different axle ratio than my na Benz (85 om617 4sp)?

NA would be 3.46, the turbo is 3.06.

aaa

03-07-2012, 07:58 PM #4

(03-07-2012, 11:03 AM)doosky One question, does my turbo Benz (84 om617a auto) have a different axle ratio than my na Benz (85 om617 4sp)?

NA would be 3.46, the turbo is 3.06.

lgreeley83

Mr. Rumbles

775

03-07-2012, 10:25 PM #5

(03-07-2012, 05:59 PM)Purplecomputer I would take the 4spd out of the totaled car and slap it on the turbo motor. Should be real fun to drive.

" straighten up that star on the grill, assholes."

lgreeley83

03-07-2012, 10:25 PM #5

(03-07-2012, 05:59 PM)Purplecomputer I would take the 4spd out of the totaled car and slap it on the turbo motor. Should be real fun to drive.

" straighten up that star on the grill, assholes."

doosky

Naturally-aspirated

5

03-07-2012, 10:41 PM #6

(03-07-2012, 05:59 PM)Purplecomputer I would take the 4spd out of the totaled car and slap it on the turbo motor. Should be real fun to drive. Also it looks like you can salvage the front euro bumper.

The guy I bought the car from did the swap, this guy's has at least 30 of these on his property, it's like diesel w123 heaven, w/ a few 80's yota trucks thrown in. He even has a Toyota camper, and his work truck is an 80's 1 ton yota. I actually bought the euro Benz from him as well. Yeah the euro bumper is pretty salvageable, same with the fenders and doors. Later down the road I could see myself putting on some AMG bumpers, they look pretty sweet.

(03-07-2012, 01:26 PM)sassparilla_kid Its just a flesh wound! But seriously that does suck though, Euro cars are awesome

Anyway about your list of stuff to do, valve adjustment and injection pump timing will surely help with mileage and power. When I adjusted the IP timing in my car I got like 8 more mpg's, unfortunately its out of adjustment again and I've been too lazy/busy to re-do it properly.

Also I have a two tank WVO setup if you have any questions

Anyway, good luck!!

That's what's on my list, now does the euro om617 have a better ip than the us om617a? Also I'm curious about adjusting the ALDA, the only thing that I hear is that it gives better throttle response, and it can make your car bellow out black smoke. The only thing that I want to smoke on my car is tires, so if there's no really benefit from tweaking or removing it then I won't even bother. I logged 27mpg pretty consistently with mixed driving leaning more towards city driving on the 85 euro, I'd like to aim for 40mpg with this car.

As far as wvo goes, I was lookin at http://mysite.verizon.net/vzepxgzy/ and liked his setup where he used his primary tank for the veggie oil. He relocated the battery to the trunk and put a small tank under his hood where the battery is located, and used that as his diesel tank.

(03-07-2012, 07:58 PM)aaa
(03-07-2012, 11:03 AM)doosky One question, does my turbo Benz (84 om617a auto) have a different axle ratio than my na Benz (85 om617 4sp)?

NA would be 3.46, the turbo is 3.06.

Thank you, I guess I'll keep the 3.06's, this car has plenty of low end as it is, and although I'm talkin bout smokin tires, the ultimate goal is fuel economy since this will be my daily driver.

doosky

03-07-2012, 10:41 PM #6

(03-07-2012, 05:59 PM)Purplecomputer I would take the 4spd out of the totaled car and slap it on the turbo motor. Should be real fun to drive. Also it looks like you can salvage the front euro bumper.

(03-07-2012, 01:26 PM)sassparilla_kid Its just a flesh wound! But seriously that does suck though, Euro cars are awesome

Anyway about your list of stuff to do, valve adjustment and injection pump timing will surely help with mileage and power. When I adjusted the IP timing in my car I got like 8 more mpg's, unfortunately its out of adjustment again and I've been too lazy/busy to re-do it properly.

Also I have a two tank WVO setup if you have any questions

Anyway, good luck!!

(03-07-2012, 07:58 PM)aaa
(03-07-2012, 11:03 AM)doosky One question, does my turbo Benz (84 om617a auto) have a different axle ratio than my na Benz (85 om617 4sp)?

NA would be 3.46, the turbo is 3.06.

Thank you, I guess I'll keep the 3.06's, this car has plenty of low end as it is, and although I'm talkin bout smokin tires, the ultimate goal is fuel economy since this will be my daily driver.

sassparilla_kid

diesel > all other fuels

1,618

03-08-2012, 02:53 AM #7

The only down side to using the stock tank for veg is that its not as easy to remove and clean if/when necessary. I haven't looked in my tank to see if its getting dirty or not, but I know my friend bought a late 70's diesel rabbit that had been converted and one of the first things he did was take the auxiliary tank out and pressure/steam clean it because it was so nasty, but the people he bought it from were stoners that didn't know what they were doing and put dirty oil in it. They also didn't install a return line for the veg tank so it all ended up in the stock tank after about 20 minutes of driving lol

Other than that, I would say that method looks good, pretty much the same thing I did except I have a hose-in-hose to heat my oil instead of a heat exchanger like that one

sassparilla_kid

03-08-2012, 02:53 AM #7

dieselsmoke300d

To many things I say: Bah Humbug!

65

05-25-2012, 03:23 AM #8

Damn shame. The Euro model looked amazing! But the new one looks good. Not sure I'd go with the veggie set up though. But that's just me. I've seen people process biodiesel pretty easily. They just get 5 gallon jugs of filtered oil, mix in the methanol and lye, let the jug sit for a couple days, pour off the good stuff, and it's basically done. I suppose the veggie setup is more instant but what freaks me out is what kind of crap it can do to your engine. Just my opinion.

Matt.

'85 300SD Turbo
'92 Subaru SVX
'83 Pontiac Firebird S/E
'88 Pontiac Firebird

dieselsmoke300d

05-25-2012, 03:23 AM #8

Matt.

'85 300SD Turbo
'92 Subaru SVX
'83 Pontiac Firebird S/E
'88 Pontiac Firebird

ronnie

GT2559V

179

05-28-2012, 06:05 PM #9

the 84 should have a 3.06 rear and the 85 should have a 2.88 rear.

I would not use veggie in the stock tank for too long as veggie will rust a steel tank, and create what is called "chicken skin" that will come loose sooner or later. I know for using a steel tank in my truck, that has a two tank veggie system. Now have an aluminum veggie tank in the truck. No veggie in the 240.

ronnie

05-28-2012, 06:05 PM #9

RonB

TA 0301

69

06-04-2012, 05:10 AM #10

Chicken skin???? The mind boggles.

RonB

06-04-2012, 05:10 AM #10

Chicken skin???? The mind boggles.

mamali
Unregistered

11-19-2012, 03:15 PM #11

if you want to sell teh Climate control please let me know. I have a 84 300D Euro. Thanks

mamali

11-19-2012, 03:15 PM #11

if you want to sell teh Climate control please let me know. I have a 84 300D Euro. Thanks

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)