STD Tuning Engine best turbo for 605

best turbo for 605

best turbo for 605

 
  • 0 Vote(s) - 0 Average
 
barrote
Superturbo

1,627
03-05-2012, 07:47 AM #1
hello guy´s
well still fighting with my 605 turbo conversion, i got it running not definitely but still some changes to be done, i started with a turbo from an audi tt to test, now need to change to something tough and powerful, was considering the 320cdi or gt 28 type , what do think about it and what are your advices to pursue for 300HP.

regards to u all

FD,
Powered by tractor fuel
barrote
03-05-2012, 07:47 AM #1

hello guy´s
well still fighting with my 605 turbo conversion, i got it running not definitely but still some changes to be done, i started with a turbo from an audi tt to test, now need to change to something tough and powerful, was considering the 320cdi or gt 28 type , what do think about it and what are your advices to pursue for 300HP.

regards to u all


FD,
Powered by tractor fuel

EDH_Performance
Holset

537
03-05-2012, 08:41 AM #2
(03-05-2012, 07:47 AM)barrote hello guy´s
well still fighting with my 605 turbo conversion, i got it running not definitely but still some changes to be done, i started with a turbo from an audi tt to test, now need to change to something tough and powerful, was considering the 320cdi or gt 28 type , what do think about it and what are your advices to pursue for 300HP.

regards to u all

Did you use the k03 or k04 turbo from Audi? They are super small! POST PICKTURE PLEASEBig Grin
A think a big gt28 is good for 300hpSmile
This post was last modified: 03-05-2012, 08:42 AM by EDH_Performance.
EDH_Performance
03-05-2012, 08:41 AM #2

(03-05-2012, 07:47 AM)barrote hello guy´s
well still fighting with my 605 turbo conversion, i got it running not definitely but still some changes to be done, i started with a turbo from an audi tt to test, now need to change to something tough and powerful, was considering the 320cdi or gt 28 type , what do think about it and what are your advices to pursue for 300HP.

regards to u all

Did you use the k03 or k04 turbo from Audi? They are super small! POST PICKTURE PLEASEBig Grin
A think a big gt28 is good for 300hpSmile

barrote
Superturbo

1,627
03-05-2012, 10:32 AM #3
sorry is dissembled by now, they are very small, not god for diesel i think, but i´l try to get some pictures of the new project.
dont know about k03 or 04 , the plate is damaged.
next week i´l show u pictures.

FD,
Powered by tractor fuel
barrote
03-05-2012, 10:32 AM #3

sorry is dissembled by now, they are very small, not god for diesel i think, but i´l try to get some pictures of the new project.
dont know about k03 or 04 , the plate is damaged.
next week i´l show u pictures.


FD,
Powered by tractor fuel

winmutt
bitbanger

3,468
03-06-2012, 09:36 PM #4
In the states I would say HX35W.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-06-2012, 09:36 PM #4

In the states I would say HX35W.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

sjwbond
Naturally-aspirated

8
03-07-2012, 10:49 AM #5
(03-05-2012, 07:47 AM)barrote hello guy´s
well still fighting with my 605 turbo conversion, i got it running not definitely but still some changes to be done, i started with a turbo from an audi tt to test, now need to change to something tough and powerful, was considering the 320cdi or gt 28 type , what do think about it and what are your advices to pursue for 300HP.

regards to u all

I have GT28R in a 606, and can confirm its good, spools faster than standard turbo too, only point I'd say is im not sure its worth $1000, when you can get a HX35 much cheaper.

sjwbond
03-07-2012, 10:49 AM #5

(03-05-2012, 07:47 AM)barrote hello guy´s
well still fighting with my 605 turbo conversion, i got it running not definitely but still some changes to be done, i started with a turbo from an audi tt to test, now need to change to something tough and powerful, was considering the 320cdi or gt 28 type , what do think about it and what are your advices to pursue for 300HP.

regards to u all

I have GT28R in a 606, and can confirm its good, spools faster than standard turbo too, only point I'd say is im not sure its worth $1000, when you can get a HX35 much cheaper.

bad3gakk
om605 - kkk27 - w124

52
03-07-2012, 10:50 AM #6
If you count the volumetric efficiency of the 605 and 603, I think they would come out next to equal..
Look for sucessful 603 stories Smile

3 x 0,7 / 2 = 1,05
2,5 x 0,9 / 2 = 1,125

The 12 valves of the 3 liter 603, only manages to let ca 70% of the 3 liter throug the head... divided by 2 since each cylinder only gasps for air every other rpm....equals 1,065 liters of air Smile
While the 20 valves of the 2,5 liter 605, can move ca 90%.......... this is actually more Smile
bad3gakk
03-07-2012, 10:50 AM #6

If you count the volumetric efficiency of the 605 and 603, I think they would come out next to equal..
Look for sucessful 603 stories Smile

3 x 0,7 / 2 = 1,05
2,5 x 0,9 / 2 = 1,125

The 12 valves of the 3 liter 603, only manages to let ca 70% of the 3 liter throug the head... divided by 2 since each cylinder only gasps for air every other rpm....equals 1,065 liters of air Smile
While the 20 valves of the 2,5 liter 605, can move ca 90%.......... this is actually more Smile

barrote
Superturbo

1,627
03-07-2012, 10:51 AM #7
thanks winmutt,
don´t u think is too big? maybe have a lot of lag? where can i find one cheap, is that one bearings or journal? cause my wife´s 270 cdi lost the turbo and after a 1200 € repair i´m capable of burning that car**()"# and other things , nothing like the oldtimers.

thanks

FD,
Powered by tractor fuel
barrote
03-07-2012, 10:51 AM #7

thanks winmutt,
don´t u think is too big? maybe have a lot of lag? where can i find one cheap, is that one bearings or journal? cause my wife´s 270 cdi lost the turbo and after a 1200 € repair i´m capable of burning that car**()"# and other things , nothing like the oldtimers.

thanks


FD,
Powered by tractor fuel

winmutt
bitbanger

3,468
03-07-2012, 08:51 PM #8
(03-07-2012, 10:51 AM)barrote thanks winmutt,
don´t u think is too big? maybe have a lot of lag? where can i find one cheap, is that one bearings or journal? cause my wife´s 270 cdi lost the turbo and after a 1200 € repair i´m capable of burning that car**()"# and other things , nothing like the oldtimers.

thanks

Assuming you get a modded pump, no. Ebay.com avg price is 1-300$. Journal.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
03-07-2012, 08:51 PM #8

(03-07-2012, 10:51 AM)barrote thanks winmutt,
don´t u think is too big? maybe have a lot of lag? where can i find one cheap, is that one bearings or journal? cause my wife´s 270 cdi lost the turbo and after a 1200 € repair i´m capable of burning that car**()"# and other things , nothing like the oldtimers.

thanks

Assuming you get a modded pump, no. Ebay.com avg price is 1-300$. Journal.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

barrote
Superturbo

1,627
03-08-2012, 10:23 AM #9
o´right i´ll get the pump re-elemented in future, for now i´ll go with max Tq and stair ruller as we say here to max pumping, should do.
the ones from ebay are the ones made in china right? does the part number matters?
since i´ll buy one , why not buy the most suitableSmile
regards

FD,
Powered by tractor fuel
barrote
03-08-2012, 10:23 AM #9

o´right i´ll get the pump re-elemented in future, for now i´ll go with max Tq and stair ruller as we say here to max pumping, should do.
the ones from ebay are the ones made in china right? does the part number matters?
since i´ll buy one , why not buy the most suitableSmile
regards


FD,
Powered by tractor fuel

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)