STD Tuning Engine OM606 max performance?

OM606 max performance?

OM606 max performance?

 
  • 0 Vote(s) - 0 Average
 
GeorgeHasmanda
Naturally-aspirated

21
02-29-2012, 11:00 AM #1
Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile
GeorgeHasmanda
02-29-2012, 11:00 AM #1

Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

EDH_Performance
Holset

537
02-29-2012, 04:47 PM #2
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
EDH_Performance
02-29-2012, 04:47 PM #2

(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink

GeorgeHasmanda
Naturally-aspirated

21
03-01-2012, 11:07 AM #3
(02-29-2012, 04:47 PM)EDH_Performance
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
think you a BMW E30? i see too.think you 500hp no problem?

GeorgeHasmanda
03-01-2012, 11:07 AM #3

(02-29-2012, 04:47 PM)EDH_Performance
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
think you a BMW E30? i see too.think you 500hp no problem?

EDH_Performance
Holset

537
03-02-2012, 05:34 AM #4
Stock engine can easily put out 500hp with a good manifold, turbo and Injection pumpWink
EDH_Performance
03-02-2012, 05:34 AM #4

Stock engine can easily put out 500hp with a good manifold, turbo and Injection pumpWink

GeorgeHasmanda
Naturally-aspirated

21
03-02-2012, 10:57 AM #5
ok,thank you very much Wink
GeorgeHasmanda
03-02-2012, 10:57 AM #5

ok,thank you very much Wink

tomnik
Holset

587
03-03-2012, 12:37 AM #6
btw. where in CZ are you?

Tom

(03-02-2012, 10:57 AM)GeorgeHasmanda ok,thank you very much Wink

tomnik
03-03-2012, 12:37 AM #6

btw. where in CZ are you?

Tom

(03-02-2012, 10:57 AM)GeorgeHasmanda ok,thank you very much Wink

GeorgeHasmanda
Naturally-aspirated

21
03-04-2012, 04:05 AM #7
(03-03-2012, 12:37 AM)tomnik btw. where in CZ are you?

Tom

(03-02-2012, 10:57 AM)GeorgeHasmanda ok,thank you very much Wink
I'm from Karlovy Vary.

GeorgeHasmanda
03-04-2012, 04:05 AM #7

(03-03-2012, 12:37 AM)tomnik btw. where in CZ are you?

Tom

(03-02-2012, 10:57 AM)GeorgeHasmanda ok,thank you very much Wink
I'm from Karlovy Vary.

mantahead
Holset

600
03-05-2012, 04:57 PM #8
(02-29-2012, 04:47 PM)EDH_Performance
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
hi,
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?

wayne

mantahead
03-05-2012, 04:57 PM #8

(02-29-2012, 04:47 PM)EDH_Performance
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
hi,
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?

wayne

EDH_Performance
Holset

537
03-11-2012, 04:40 PM #9
(03-05-2012, 04:57 PM)mantahead
(02-29-2012, 04:47 PM)EDH_Performance
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
hi,
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?

wayne
I dont know how big the elements was, but it was an HX55 TURBO! Big Grin
Haven`t heard of anything higher, but my goal is over 1000NM Smile
EDH_Performance
03-11-2012, 04:40 PM #9

(03-05-2012, 04:57 PM)mantahead
(02-29-2012, 04:47 PM)EDH_Performance
(02-29-2012, 11:00 AM)GeorgeHasmanda Hello guys.I wanted to ask,where is the maximum performance of OM606 engine with stock engine(pistons,camshafts,connecting rods etc...).thak you very much for your answers Smile

I have seen one OM606 with stiffer valvesprings making 614hp and 904nmWink
hi,
what turbo was used to get this amount of power and what pump? how many cc of fuel?
Have you ever heard of a om606 with more power?

wayne
I dont know how big the elements was, but it was an HX55 TURBO! Big Grin
Haven`t heard of anything higher, but my goal is over 1000NM Smile

mantahead
Holset

600
03-11-2012, 05:36 PM #10
hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne
mantahead
03-11-2012, 05:36 PM #10

hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

EDH_Performance
Holset

537
03-11-2012, 05:58 PM #11
(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
EDH_Performance
03-11-2012, 05:58 PM #11

(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...

mantahead
Holset

600
03-12-2012, 05:34 PM #12
(03-11-2012, 05:58 PM)EDH_Performance
(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.


This post was last modified: 03-12-2012, 05:38 PM by mantahead.
mantahead
03-12-2012, 05:34 PM #12

(03-11-2012, 05:58 PM)EDH_Performance
(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.


GeorgeHasmanda
Naturally-aspirated

21
03-16-2012, 02:18 PM #13
(03-12-2012, 05:34 PM)mantahead
(03-11-2012, 05:58 PM)EDH_Performance
(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?

GeorgeHasmanda
03-16-2012, 02:18 PM #13

(03-12-2012, 05:34 PM)mantahead
(03-11-2012, 05:58 PM)EDH_Performance
(03-11-2012, 05:36 PM)mantahead hi,
A HX55, holy shit, it must have been laggy or was it compound with another turbo? Thats a big turbo.

wayne

a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?

EDH_Performance
Holset

537
03-16-2012, 07:02 PM #14
(03-16-2012, 02:18 PM)GeorgeHasmanda
(03-12-2012, 05:34 PM)mantahead
(03-11-2012, 05:58 PM)EDH_Performance a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink

EDH_Performance
03-16-2012, 07:02 PM #14

(03-16-2012, 02:18 PM)GeorgeHasmanda
(03-12-2012, 05:34 PM)mantahead
(03-11-2012, 05:58 PM)EDH_Performance a compressor was boosting from idleSmile Search for "bmw e30 om606" on youtubeWink
You will also find many pictures of the build some where...
hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink

GeorgeHasmanda
Naturally-aspirated

21
03-18-2012, 07:01 AM #15
(03-16-2012, 07:02 PM)EDH_Performance
(03-16-2012, 02:18 PM)GeorgeHasmanda
(03-12-2012, 05:34 PM)mantahead hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink
Could you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz

GeorgeHasmanda
03-18-2012, 07:01 AM #15

(03-16-2012, 07:02 PM)EDH_Performance
(03-16-2012, 02:18 PM)GeorgeHasmanda
(03-12-2012, 05:34 PM)mantahead hi,
that is a lethal machine.
1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink
Could you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz

EDH_Performance
Holset

537
03-19-2012, 08:01 AM #16
(03-18-2012, 07:01 AM)GeorgeHasmanda
(03-16-2012, 07:02 PM)EDH_Performance
(03-16-2012, 02:18 PM)GeorgeHasmanda 1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink
Could you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz
Check out my "norwegian Build" in the project threadsSmile

EDH_Performance
03-19-2012, 08:01 AM #16

(03-18-2012, 07:01 AM)GeorgeHasmanda
(03-16-2012, 07:02 PM)EDH_Performance
(03-16-2012, 02:18 PM)GeorgeHasmanda 1000NM,ou shit Big Grin have you stock engine?What boost is your goal?over 3bar?
It is an Om606 with: Ported head, h-profile rods, main girdle for main bearings, custom header and intake+++ My goal is 1000nm, so i need to change camshafts and valvespring firstTongue Yes, i think 3+bar is enough, but time will tellWink
Could you send me some photos of your engine please?thank you very much , my mail is o.g.65@seznam.cz
Check out my "norwegian Build" in the project threadsSmile

mao76
TA 0301

65
07-20-2012, 07:01 PM #17
a motor bmw 330d from 231cv how much you/he/she could make of maximum hp?with an elaboration of the kind?
mao76
07-20-2012, 07:01 PM #17

a motor bmw 330d from 231cv how much you/he/she could make of maximum hp?with an elaboration of the kind?

Turbo
Holset

489
07-22-2012, 04:34 PM #18
If you look at
http://forums.tdiclub.com/showthread.php...hlight=vnt
there are clams of machines 700-900hp but not any dyno paper or some other evidence. I have heard of other stories of other monsters but still not been able to confirm them
search on jeemu and you find some nice stuff but there are more
Turbo
07-22-2012, 04:34 PM #18

If you look at
http://forums.tdiclub.com/showthread.php...hlight=vnt
there are clams of machines 700-900hp but not any dyno paper or some other evidence. I have heard of other stories of other monsters but still not been able to confirm them
search on jeemu and you find some nice stuff but there are more

mao76
TA 0301

65
09-12-2012, 04:19 PM #19
I would want to climb on a holset hx35 or a gtx3071r that it perhaps has less lag, you what you recommend me on my bmw330d
mao76
09-12-2012, 04:19 PM #19

I would want to climb on a holset hx35 or a gtx3071r that it perhaps has less lag, you what you recommend me on my bmw330d

GeorgeHasmanda
Naturally-aspirated

21
11-04-2012, 09:19 AM #20
Hello diesel maniacs.i have question,I have Om606 and i dont now how injection pump need I? Dieselmenken said 7.5 elements and 180cc a RS203 pump. This pump is from OM603 w124 or no?How I improve cc? an pumps camshaft is ok for 500hp or no? thanks very much
GeorgeHasmanda
11-04-2012, 09:19 AM #20

Hello diesel maniacs.i have question,I have Om606 and i dont now how injection pump need I? Dieselmenken said 7.5 elements and 180cc a RS203 pump. This pump is from OM603 w124 or no?How I improve cc? an pumps camshaft is ok for 500hp or no? thanks very much

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)