7,5 mm Element design for high performance engine

STD Tuning Engine 7,5 mm Element design for high performance engine

7,5 mm Element design for high performance engine

7,5 mm Element design for high performance engine

View a Printable Version

5 Vote(s) - 4.8 Average

erling66

SuperDieselVan

294

11-24-2012, 01:24 PM #319

(11-22-2012, 07:10 PM)m2rkz
(11-22-2012, 03:36 PM)EDH_Performance This sounds very strange to me! Offcourse you have mounted the fuel lines in the correct places on the pump? Not mixed the in and return?

What kind of pump did you install? does the fuelflow go trough the stock feedpump or directly to the injection pump?

You should burn 3rd gear easily with this pump

yes I can burn 3rd gear but that's not the point. And ofcourse fuelflow go directly to the injection pump. We installed Bosch 044 and pressure regulator to 3 bar. And like I said we tested the fuelflow after the filter and directly before the diesel pump and it was very good. To 3500 or 4000 everything is ok but later the boost pressure will be the same or drop down little bit. Only problem can be the 140cc pump. Something is very bad there.

Do you have any videos from when you are driving?

Huh

Cool

Tongue

erling66

11-24-2012, 01:24 PM #319

(11-22-2012, 07:10 PM)m2rkz
(11-22-2012, 03:36 PM)EDH_Performance This sounds very strange to me! Offcourse you have mounted the fuel lines in the correct places on the pump? Not mixed the in and return?

What kind of pump did you install? does the fuelflow go trough the stock feedpump or directly to the injection pump?

You should burn 3rd gear easily with this pump

yes I can burn 3rd gear but that's not the point. And ofcourse fuelflow go directly to the injection pump. We installed Bosch 044 and pressure regulator to 3 bar. And like I said we tested the fuelflow after the filter and directly before the diesel pump and it was very good. To 3500 or 4000 everything is ok but later the boost pressure will be the same or drop down little bit. Only problem can be the 140cc pump. Something is very bad there.

Do you have any videos from when you are driving?

Huh

Cool

Tongue

View a Printable Version

5 Vote(s) - 4.8 Average

Messages In This Thread

7,5 mm Element design for high performance engine - by dieselmeken - 02-27-2012, 02:43 PM

RE: 7,5 mm Element design for high performance engine - by Palmer - 02-27-2012, 03:45 PM

RE: 7,5 mm Element design for high performance engine - by willbhere4u - 02-27-2012, 04:37 PM

RE: 7,5 mm Element design for high performance engine - by Booster - 02-27-2012, 06:04 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 02-27-2012, 08:28 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 02-27-2012, 09:10 PM

RE: 7,5 mm Element design for high performance engine - by pp d - 02-28-2012, 01:39 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 02-28-2012, 02:13 AM

RE: 7,5 mm Element design for high performance engine - by barrote - 02-28-2012, 05:38 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 02-28-2012, 05:26 PM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-29-2012, 12:13 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 02-28-2012, 11:22 PM

RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 02-28-2012, 10:31 AM

RE: 7,5 mm Element design for high performance engine - by w210tdt - 02-28-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 02-28-2012, 01:21 PM

RE: 7,5 mm Element design for high performance engine - by 2996 - 02-28-2012, 01:22 PM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 02-28-2012, 01:58 PM

RE: 7,5 mm Element design for high performance engine - by Captain America - 02-29-2012, 01:25 AM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 02-29-2012, 12:31 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 02-29-2012, 03:47 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 02-29-2012, 09:42 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 12:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-01-2012, 01:41 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-01-2012, 07:29 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 03-01-2012, 07:43 PM

RE: 7,5 mm Element design for high performance engine - by w123love - 03-01-2012, 09:33 PM

RE: 7,5 mm Element design for high performance engine - by SurfRodder - 03-02-2012, 10:18 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-04-2012, 08:34 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-05-2012, 05:20 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-05-2012, 07:51 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-06-2012, 09:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-07-2012, 02:22 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-04-2012, 01:59 PM

RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 03-04-2012, 04:47 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-05-2012, 06:00 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-05-2012, 04:15 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 01:29 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-06-2012, 02:40 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-06-2012, 04:14 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-07-2012, 09:37 AM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 03-07-2012, 10:44 PM

RE: 7,5 mm Element design for high performance engine - by jonbobshinigin - 03-07-2012, 11:09 PM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 03-08-2012, 02:44 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 05:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-08-2012, 07:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-08-2012, 08:19 AM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-09-2012, 04:01 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-11-2012, 11:51 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-15-2012, 06:33 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 03-08-2012, 08:02 PM

RE: 7,5 mm Element design for high performance engine - by diesel2fast4u - 03-09-2012, 02:16 AM

RE: 7,5 mm Element design for high performance engine - by George3soccer - 03-09-2012, 08:54 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-13-2012, 06:15 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-13-2012, 07:37 AM

RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-14-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by W126Lover - 03-18-2012, 12:22 AM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 03-18-2012, 01:04 AM

RE: 7,5 mm Element design for high performance engine - by pp d - 03-18-2012, 10:29 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 04:54 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 05:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 05:48 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-21-2012, 07:55 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-21-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-21-2012, 09:14 PM

RE: 7,5 mm Element design for high performance engine - by Twinturboguy - 03-21-2012, 07:40 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 03-21-2012, 09:00 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 03-21-2012, 04:49 PM

RE: 7,5 mm Element design for high performance engine - by ErikT - 03-21-2012, 05:04 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-21-2012, 05:31 PM

RE: 7,5 mm Element design for high performance engine - by pp d - 03-22-2012, 01:02 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 03-24-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by Booster - 03-22-2012, 11:04 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-22-2012, 01:36 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-23-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 07:03 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-23-2012, 02:34 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-23-2012, 02:17 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-23-2012, 04:07 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-23-2012, 05:57 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-24-2012, 12:21 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-24-2012, 04:43 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-24-2012, 02:51 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-25-2012, 03:03 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 03-26-2012, 02:32 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-26-2012, 06:04 PM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-27-2012, 02:41 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-28-2012, 06:10 AM

RE: 7,5 mm Element design for high performance engine - by Savitas - 03-28-2012, 07:47 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-28-2012, 11:16 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-28-2012, 12:29 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-28-2012, 02:19 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 10:02 AM

RE: 7,5 mm Element design for high performance engine - by JustPassinThru - 03-28-2012, 11:28 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-28-2012, 03:29 PM

RE: 7,5 mm Element design for high performance engine - by Simpler=Better - 03-28-2012, 03:32 PM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 03-29-2012, 10:19 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-29-2012, 04:46 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-29-2012, 11:59 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 03-30-2012, 02:16 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 04-01-2012, 03:30 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 03-30-2012, 04:57 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-30-2012, 05:15 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 03-31-2012, 01:21 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 03-31-2012, 02:40 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 03-31-2012, 02:11 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 03:07 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-01-2012, 09:23 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-01-2012, 01:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 04-02-2012, 08:50 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-02-2012, 10:56 AM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 04-02-2012, 09:33 PM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 04-02-2012, 05:47 PM

RE: 7,5 mm Element design for high performance engine - by 2996 - 04-03-2012, 12:13 PM

RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-03-2012, 12:48 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-03-2012, 09:13 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-05-2012, 01:55 PM

RE: 7,5 mm Element design for high performance engine - by iheartboost - 04-05-2012, 07:05 PM

RE: 7,5 mm Element design for high performance engine - by Captain America - 04-09-2012, 03:29 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-09-2012, 03:36 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-11-2012, 01:00 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-11-2012, 03:25 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-17-2012, 12:12 AM

RE: 7,5 mm Element design for high performance engine - by Volker407 - 05-28-2012, 04:20 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-28-2012, 09:45 AM

RE: 7,5 mm Element design for high performance engine - by DeliveryValve - 04-17-2012, 01:54 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 04-19-2012, 04:54 PM

RE: 7,5 mm Element design for high performance engine - by yatzee - 04-19-2012, 04:56 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 04-20-2012, 08:16 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 05:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2012, 06:29 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-27-2012, 06:35 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 04-27-2012, 05:38 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-01-2012, 09:51 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 05-01-2012, 03:30 PM

RE: 7,5 mm Element design for high performance engine - by Diesel-Wiking - 05-01-2012, 04:08 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-02-2012, 02:21 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-04-2012, 08:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-04-2012, 10:19 AM

RE: 7,5 mm Element design for high performance engine - by George3soccer - 05-04-2012, 11:45 AM

RE: 7,5 mm Element design for high performance engine - by swecias - 05-04-2012, 12:59 PM

RE: 7,5 mm Element design for high performance engine - by bricktron - 05-06-2012, 01:39 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-11-2012, 11:11 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-13-2012, 09:49 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-22-2012, 04:41 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 05-22-2012, 06:32 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 05-22-2012, 02:36 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-23-2012, 01:23 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 05-30-2012, 10:41 AM

RE: 7,5 mm Element design for high performance engine - by W126Lover - 07-17-2012, 12:03 AM

RE: 7,5 mm Element design for high performance engine - by _siim_ - 07-17-2012, 08:35 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2012, 01:03 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 06:05 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-19-2012, 12:12 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-19-2012, 03:02 PM

RE: 7,5 mm Element design for high performance engine - by Riverstick - 07-19-2012, 12:53 PM

RE: 7,5 mm Element design for high performance engine - by Spaceraver - 07-18-2012, 01:42 PM

RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-19-2012, 07:34 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 12:27 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 09:38 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-20-2012, 01:44 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-20-2012, 02:53 PM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-21-2012, 12:01 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-21-2012, 03:53 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 07-22-2012, 02:20 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-02-2012, 09:27 AM

RE: 7,5 mm Element design for high performance engine - by Greazzer - 07-20-2012, 10:36 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-06-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-06-2012, 01:52 PM

RE: 7,5 mm Element design for high performance engine - by aaa - 08-06-2012, 11:38 PM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-07-2012, 03:38 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-07-2012, 12:52 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-07-2012, 05:34 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 10:16 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 10:24 AM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 11:08 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-08-2012, 04:42 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-08-2012, 01:23 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-08-2012, 02:33 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-08-2012, 03:35 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-09-2012, 03:00 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-09-2012, 06:51 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-10-2012, 10:11 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 08-10-2012, 04:04 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-10-2012, 05:36 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-13-2012, 12:41 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 08-09-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-09-2012, 02:06 PM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 06:17 AM

RE: 7,5 mm Element design for high performance engine - by Mark_M - 08-12-2012, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-12-2012, 10:47 AM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 08-13-2012, 09:09 AM

RE: 7,5 mm Element design for high performance engine - by ronnie - 08-13-2012, 11:35 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 02:03 PM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-13-2012, 03:57 PM

RE: 7,5 mm Element design for high performance engine - by frodes - 08-13-2012, 04:00 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 08-14-2012, 01:28 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 08-14-2012, 12:46 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 08-14-2012, 05:28 AM

RE: 7,5 mm Element design for high performance engine - by mercemann - 08-15-2012, 12:40 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-14-2012, 08:46 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 08-15-2012, 12:09 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 08-17-2012, 09:18 AM

RE: 7,5 mm Element design for high performance engine - by RICHIS - 08-17-2012, 05:23 PM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 11:52 AM

RE: 7,5 mm Element design for high performance engine - by sassparilla_kid - 08-18-2012, 08:38 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-20-2012, 08:58 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 08-20-2012, 09:36 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 08-22-2012, 06:09 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-09-2012, 03:24 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 09-09-2012, 01:46 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-10-2012, 06:01 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 09-09-2012, 09:17 PM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 09-09-2012, 10:33 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 09-10-2012, 09:14 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 06:21 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 09-12-2012, 04:29 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-10-2012, 11:12 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-11-2012, 04:07 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 02:40 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-12-2012, 03:55 AM

RE: 7,5 mm Element design for high performance engine - by tomnik - 09-12-2012, 04:27 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-18-2012, 09:10 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 10-19-2012, 10:17 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 10-20-2012, 03:40 PM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-25-2012, 03:22 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 10-27-2012, 04:09 AM

RE: 7,5 mm Element design for high performance engine - by huseyin55amg - 10-28-2012, 01:31 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:16 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:18 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 11:54 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-02-2012, 11:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 01:04 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-07-2012, 04:30 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-08-2012, 12:31 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-08-2012, 07:38 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-09-2012, 04:19 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-02-2012, 02:01 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-02-2012, 02:26 PM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 11-02-2012, 06:45 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-02-2012, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-03-2012, 08:20 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-03-2012, 10:47 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-03-2012, 06:10 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-03-2012, 07:33 PM

RE: 7,5 mm Element design for high performance engine - by dieselmerc - 11-06-2012, 05:58 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-06-2012, 02:57 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 08:18 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-06-2012, 11:05 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-07-2012, 05:10 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-10-2012, 12:19 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-10-2012, 01:58 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-10-2012, 03:35 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-10-2012, 03:36 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-11-2012, 12:37 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-12-2012, 05:51 AM

RE: 7,5 mm Element design for high performance engine - by raidaru - 11-12-2012, 12:33 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-13-2012, 12:28 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-15-2012, 09:05 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 10:44 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 10:44 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:02 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:10 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:14 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 11:17 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 11:22 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:09 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:11 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-15-2012, 11:24 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:12 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 04:18 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:21 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-15-2012, 03:27 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:21 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 12:26 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 12:32 PM

RE: 7,5 mm Element design for high performance engine - by Savitas - 11-15-2012, 02:29 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 02:54 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-15-2012, 04:13 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:16 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-15-2012, 04:28 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-15-2012, 04:59 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 01:45 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 02:34 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 03:30 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-16-2012, 04:07 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:10 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 04:17 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-16-2012, 07:00 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-16-2012, 08:30 AM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-16-2012, 11:38 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-16-2012, 04:42 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 11-16-2012, 04:56 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-18-2012, 08:45 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 07:17 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-17-2012, 08:47 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 09:14 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-17-2012, 05:12 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-17-2012, 05:16 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-18-2012, 12:15 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-18-2012, 12:22 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 01:18 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 01:26 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 03:20 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 11-22-2012, 03:14 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-17-2012, 07:07 PM

RE: 7,5 mm Element design for high performance engine - by raysorenson - 11-17-2012, 08:50 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-22-2012, 03:36 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:10 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 11-24-2012, 01:24 PM

RE: 7,5 mm Element design for high performance engine - by Mark_M - 11-22-2012, 07:34 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-22-2012, 07:39 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-23-2012, 03:31 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-23-2012, 05:06 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 11-23-2012, 08:37 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 12:14 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-24-2012, 07:05 AM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-25-2012, 09:17 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 01:09 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-24-2012, 01:19 PM

RE: 7,5 mm Element design for high performance engine - by jeemu - 11-24-2012, 03:50 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 05:42 PM

RE: 7,5 mm Element design for high performance engine - by m2rkz - 11-24-2012, 06:49 PM

RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-25-2012, 11:37 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-25-2012, 03:54 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 02:55 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:16 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 11-26-2012, 12:41 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-26-2012, 12:56 PM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-27-2012, 03:11 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 03:45 PM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-27-2012, 05:39 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-27-2012, 05:45 PM

RE: 7,5 mm Element design for high performance engine - by hooblah - 11-27-2012, 06:07 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:14 AM

RE: 7,5 mm Element design for high performance engine - by Siekkinen - 11-29-2012, 03:52 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 03:55 PM

RE: 7,5 mm Element design for high performance engine - by 300SD81 - 11-29-2012, 11:21 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 11:25 AM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 11-29-2012, 01:27 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 01:42 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 11-29-2012, 04:23 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 11-29-2012, 04:32 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 12-01-2012, 03:00 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 12-02-2012, 09:05 AM

RE: 7,5 mm Element design for high performance engine - by Ksteen2 - 11-30-2012, 03:00 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-01-2012, 09:58 AM

RE: 7,5 mm Element design for high performance engine - by maKe- - 12-02-2012, 07:21 PM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 12-11-2012, 05:49 AM

RE: 7,5 mm Element design for high performance engine - by BigAssCFotPrint - 12-11-2012, 09:50 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 12-20-2012, 11:00 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 01-21-2013, 01:51 AM

RE: 7,5 mm Element design for high performance engine - by raysorenson - 01-21-2013, 06:34 PM

RE: 7,5 mm Element design for high performance engine - by swecias - 03-03-2013, 12:58 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-26-2013, 08:04 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:11 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:18 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-26-2013, 08:41 AM

RE: 7,5 mm Element design for high performance engine - by frodes - 04-26-2013, 04:57 PM

RE: 7,5 mm Element design for high performance engine - by erling66 - 04-27-2013, 02:43 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-27-2013, 05:25 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 04-26-2013, 04:55 PM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 04-26-2013, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 04-27-2013, 06:37 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 04-27-2013, 05:09 PM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-29-2013, 10:33 AM

RE: 7,5 mm Element design for high performance engine - by lgreeley83 - 04-29-2013, 11:54 AM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 04-30-2013, 04:23 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-06-2013, 01:08 PM

RE: 7,5 mm Element design for high performance engine - by Stamsaas - 05-06-2013, 02:23 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 05-06-2013, 04:00 PM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 05-06-2013, 04:04 PM

RE: 7,5 mm Element design for high performance engine - by Njdub - 05-06-2013, 08:53 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-12-2013, 01:46 PM

RE: 7,5 mm Element design for high performance engine - by hansebanger77 - 06-12-2013, 02:12 PM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-12-2013, 03:15 PM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-12-2013, 04:45 PM

RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-12-2013, 09:08 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 06-13-2013, 03:32 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-13-2013, 09:56 AM

RE: 7,5 mm Element design for high performance engine - by squirrelmaster - 06-13-2013, 03:21 PM

RE: 7,5 mm Element design for high performance engine - by Bangaway - 06-13-2013, 08:12 PM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-14-2013, 10:09 AM

RE: 7,5 mm Element design for high performance engine - by winmutt - 06-14-2013, 12:03 PM

RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 07:35 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-17-2013, 09:58 AM

RE: 7,5 mm Element design for high performance engine - by maKe- - 06-17-2013, 11:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 10:14 AM

RE: 7,5 mm Element design for high performance engine - by Duncansport - 06-19-2013, 11:18 AM

RE: 7,5 mm Element design for high performance engine - by willbhere4u - 06-19-2013, 10:32 AM

RE: 7,5 mm Element design for high performance engine - by Alastair E - 06-19-2013, 11:28 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-19-2013, 05:35 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-19-2013, 11:39 PM

RE: 7,5 mm Element design for high performance engine - by majesty78 - 06-21-2013, 06:20 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 06-21-2013, 07:31 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-28-2013, 08:42 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 06-28-2013, 11:55 AM

RE: 7,5 mm Element design for high performance engine - by barrote - 07-01-2013, 11:58 AM

RE: 7,5 mm Element design for high performance engine - by sorin_cel - 07-07-2013, 02:51 PM

RE: 7,5 mm Element design for high performance engine - by ErikT - 07-10-2013, 03:39 PM

RE: 7,5 mm Element design for high performance engine - by winmutt - 07-10-2013, 09:47 PM

RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-17-2013, 06:56 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-17-2013, 10:40 AM

RE: 7,5 mm Element design for high performance engine - by yankneck696 - 07-18-2013, 08:12 AM

RE: 7,5 mm Element design for high performance engine - by Domino81 - 07-18-2013, 01:59 PM

RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-18-2013, 05:59 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-19-2013, 04:02 AM

RE: 7,5 mm Element design for high performance engine - by HaavardPYA - 07-19-2013, 10:13 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-19-2013, 01:48 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 07-21-2013, 09:09 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 07-22-2013, 02:58 AM

RE: 7,5 mm Element design for high performance engine - by jeemu - 07-27-2013, 03:23 PM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 07-28-2013, 08:20 AM

RE: 7,5 mm Element design for high performance engine - by maxypriest - 07-23-2013, 08:36 AM

RE: 7,5 mm Element design for high performance engine - by mantahead - 07-23-2013, 12:34 PM

RE: 7,5 mm Element design for high performance engine - by HoleshotHolset - 07-26-2013, 06:43 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 09-06-2013, 07:17 AM

RE: 7,5 mm Element design for high performance engine - by hooblah - 09-06-2013, 10:39 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 09-06-2013, 01:26 PM

RE: 7,5 mm Element design for high performance engine - by 300SD_KY - 01-21-2014, 05:41 PM

RE: 7,5 mm Element design for high performance engine - by F.R.A.S - 01-23-2014, 09:33 AM

RE: 7,5 mm Element design for high performance engine - by baldur - 02-03-2014, 09:19 AM

RE: 7,5 mm Element design for high performance engine - by EDH_Performance - 02-03-2014, 12:43 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 04-28-2014, 11:10 AM

RE: 7,5 mm Element design for high performance engine - by Turbo - 04-28-2014, 02:48 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 05-03-2014, 06:49 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-26-2014, 02:56 PM

RE: 7,5 mm Element design for high performance engine - by Turbo - 06-26-2014, 04:39 PM

RE: 7,5 mm Element design for high performance engine - by MFSuper90 - 06-26-2014, 05:00 PM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 01:58 AM

RE: 7,5 mm Element design for high performance engine - by Gearbound - 06-26-2014, 05:08 PM

RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 03:19 AM

RE: 7,5 mm Element design for high performance engine - by dieselmeken - 06-27-2014, 03:42 AM

RE: 7,5 mm Element design for high performance engine - by DiseaselWeasel - 06-27-2014, 04:37 AM

RE: 7,5 mm Element design for high performance engine - by Spoolin - 09-08-2016, 12:11 PM

Users browsing this thread:
14 Guest(s)

Users browsing this thread:
14 Guest(s)